• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.386-387
• /
• 2003

Titania-silica hybrid inorganic materials are interesting subjects and many researchers have been studying.$\^$1-3)/ In general, the titania-silica hybrid materials are used as film and catalyst. Sol-gel method has widely been used as an alternative technology to prepare a wide variety of applications including monoliths, powders, coatings, and fibers.$\^$4-6)/ The typical sol-gel method is hydrolysis and condensation of tetraethyl orthosilicate (TEOS), Si(OCH$_2$CH$_3$)$_4$. (omitted)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.63-63
• /
• 2009

Many researchers have been studied as active and transparent electrode using ZnO (Zinc oxide) inorganic semiconductor material due to their good properties such as wide band-gap and high electrical properties compared with amorphous-Si. In this study, we fabricated ZnO films by the RF magnetron sputtering method at a low temperature for a channel layer in thin-film transistor (TFT) and investigated the characteristics of sputtered ZnO films. Also, the electrical properties of TFT using ZnO channel layer such as field effect mobility(${\mu}$), threshold voltage ($V_{th}$), and $I_{on/off}$ ratio are investigated for the application of the display and electronic devices.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.106-106
• /
• 2003

최근 집적형 광소자, 레이저 재료, 자료 저장 또는 통신 기술부문에서 제어된 광학적 성질을 갖는 유기-무기 나노 복합체를 만드는 연구가 많은 관심과 주목을 받고 있다. 유기물인 PEG는 대다수의 금속염을 고정시키는 용매 역할을 하는 polymer로써 액체와 같은 특징을 나타내며 무기물인 silica의 network는 순수한 PEG 시스템보다 좋은 기계적 물성을 나타내며, 투명한 물질을 얻을 수 있게 해 준다. 이에 본 연구에서는 SiO2-PEG의 matrix에 우수한 광학적 성질을 지닌 europium을 doping하여 유기-무기 나노 복합막을 합성하여 europium의 농도와 PEG 분자량에 따른 구조적 및 광학적 성질을 알아보고자 한다.

• The Korean Journal of Ceramics
• /
• v.7 no.1
• /
• pp.26-29
• /
• 2001

Indium tin oxide (ITO) films were deposited on glass substrates at $300^{\circ}C$ in oxygen/argon mixtures by RF-enhanced DC-magnetron sputtering and were compared to those by conventional DC magnetron sputtering. The RF enhancement was performed using a coil above an ITO target. X-ray diffraction measurements revealed that RF-enhanced plasma affected the preferred orientation and the crystallinity of the films. The resistivity of the films prepared by RF-enhanced DC-magnetron sputtering was almost constant at oxygen content lower than 0.3% and then increased sharply with increasing oxygen content. However the resistivity of the films by conventional sputtering has little dependence on the oxygen content. Those results can be explained on the basis of the incorporation of oxygen into the ITO films due to the RF enhancement.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.92-94
• /
• 2003

Recently, the study on development of electrical and electronic device is done to get miniature, high degrees of integration and efficiency by using inorganic materials, the study of Langmuir-Boldgett(LB) method that uses organic materials because of the limitation for the ultra small size. In this paper, detected displacement current using PBLG and PBDG, deposition and observed the electrical characteristics to each 1, 3, 5, 7, 9 layers by LB method. Maximum value of change ratio of displacement current by the detected speed and temperature appeared almost lineally, could confirm that it are in comparison relation each other speed-temperature and displacement current. The structure of manufactured device is MIM. Also, we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from 0 to +2[V]. The insulation property of a thin film is better as the distance between electrodes is larger.

• Microbiology and Biotechnology Letters
• /
• v.24 no.6
• /
• pp.733-737
• /
• 1996

The formation of microbial films(biofilm) by a non-sulfur phototrophic bacteria, Rhodopseudomonas capsulata, on inorganic media was studied. Porous ceramic beads(PCB) were superior to other immobilizing media for the biofilm formation in a packed-bed reactor. It was found that the formation of microbial films favored a lower hydraulic retention time, showing a higher ratio of cells attatched to the media to those suspended in the solution. The cell concentration in the biofilm reactor was as high as 11,400mg/l, which is 8-folds of the cell concentration in an ordinary suspended treatment. It was observed that the formation of micribial film by R. capsulata followed a general serial process of cell attachment, microcolony formation, and biofilm formation. The microbial films thus formed was very stable even for an extremely high volumetric BOD loading rate of 15gBOD/l day. The scanning electron micrographs of the microbial films showed that the cells were attached to both the surface and pores of the media.

• 한국초전도학회:학술대회논문집
• /
• v.13
• /
• pp.70-70
• /
• 2003

• Macromolecular Research
• /
• v.10 no.2
• /
• pp.75-79
• /
• 2002

Organic materials have considerable attention as active semiconductors for device applications such as thin-film transistors (TFTs) and diodes. Pentacene is a p-type organic semiconducting material investigated for TFTs. In this paper, we reported the morphological and electrical characteristics of pentacene TFT films. The pentacene transistors showed the mobility of 0.8 $\textrm{cm}^2$/Vs and the grains larger than 1 ${\mu}{\textrm}{m}$. Deep-level transient spectroscopy (DLTS) measurements were carried out on metal/insulator/organic semiconductor structure devices that had a depletion region at the insulator/organic-semiconductor interface. The duration of the capacitance transient in DLTS signals was several ten of seconds in the pentacene, which was longer than that of inorganic semiconductors such as Si. Based on the DLTS characteristics, the energy levels of hole and electron traps for the pentacene films were approximately 0.24, 1.08, and 0.31 eV above Ev, and 0.69 eV below Ec.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.1
• /
• pp.51-65
• /
• 2008

The article presents the recent research development in polymer ferroelectric non-volatile memory. A brief overview is given of the history of ferroelectric memory and device architectures based on inorganic ferroelectric materials. Particular emphasis is made on device elements such as metal/ferroelectric/metal type capacitor, metal-ferroelectric-insulator-semiconductor (MFIS) and ferroelectric field effect transistor (FeFET) with ferroelectric poly(vinylidene fluoride) (PVDF) and its copolymers with trifluoroethylene (TrFE). In addition, various material and process issues for realization of polymer ferroelectric non-volatile memory are discussed, including the control of crystal polymorphs, film thickness, crystallization and crystal orientation and the unconventional patterning techniques.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.181.3-181
• /
• 2001

Recently, the study on development of electrical and electronic device is done to get miniature, high degrees of integration and efficiency by using inorganic materials. the study of Langmuir-Boldgett(LB) method that uses organic materials because of the limitation for the ultrasmall size. In this paper, to do research for medical artificial organs as well as principal parts living body thin film application, electrical properties of L-$\alpha$-DLPC Langmuir(L) films were investigated a displacement current measuring technique with pressure stimulation. We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 20[mN/m]. LB layers of L-$\alpha$-DLPC deposited by LB method ...