• Journal of the Korean Ceramic Society
• /
• v.45 no.8
• /
• pp.443-452
• /
• 2008

Shrinkage crack is a major concern for cement materials, especially for flat structures such as Korean On-Dol floor system, flooring for garages, and wall. One of the methods to reduce the adverse effects of shrinkage cracking is to reinforce cement materials with shot randomly distributed fibers. The efficiency of inorganic fibrous material to arresting cracks in cementitious composites was studied. Cement materials reinforced with five different qualities of inorganic fibrous material were tested. Contents of inorganic fibrous material were 1.0 kg, 1.5 kg, 2.0 kg, 2.5 kg, 3.0 kg by weight of cement mortar and C : S types of cement mortar were 1:3 and 1:4. W/C were 60% and 80%. Cement mortar of inorganic fibrous material reinforcement showed an ability to reduce the crack width and crack length significantly as compared to unreinforced cement mortar. $40%{\sim}60%$ drop in shrinkage crack of 1:4 cement mortar with 1.5 kg over was observed.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.59-66
• /
• 2015

A new concept of an inorganic foaming process at low temperature was demonstrated for the production of inorganic thermal insulating materials with the properties of flexible light-weight, the advantages of organic-based thermal insulation material. The foaming process was proceeded by establishing a skeleton of the foam body by using inorganic fibrous sepiolite and aluminum silicate. A cavity was formed by the expansion of fibrous skeleton body, by the gas which was generated from foaming agent at low temperature. Then the multi-vesicular expanded perlite with low thermal conductivity was filled into the cavity in a skeleton of the foam body. Finally through these overall process, a new inorganic foamed body could be obtained at low temperature without the hot melting of inorganic materials. In order to achieve this object, various preparations such as fibrous sepiolite fibrillation process, heat treatment process of the fibrous slurry were needed, and the optimal compositional condition of slurry was required. The foam body produced showed the properties of flexible light-weight thermal insulation materials such as bulk density, yield strength, flexural strength, and high heat resistance.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.40.2-40.2
• /
• 2009

Using the favorable resorption behavior of amorphous Calcium phosphate (CaP) we fabricated a gelatin basednano fibrous mat by electrospinning for using as a fast healing patch for minorbone defects. Bone is predominantly formed by an inorganic phase of nano-crystalline HAp materials and nano fibrous protein material of collagen. The osteoblast cells, which are the bone formation cells and are key to the new bone formation, receive these materials to form new bone. Taking these considerations we make a new nano fibrous mat of amorphous CaP and gelatin, which is derived from collagen itself. A polymer carrier of poly caprolactone(PCL) was used in the system to stabilize the materials in biological condition. The electrospinning conditions were optimized for smooth mat without any droplet formation. The fabricated mat was characterized for its morphologyby SEM. Mechanical properties like tensile strength was evaluated. To investigate the bio-compatibility we performed the MTT assay and investigated its resorption behavior and apatite formation behavior by SBF immersion.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.6
• /
• pp.58-69
• /
• 2012

As the meaning of dictionary terminology, scum refers to a layer of impurities that accumulates at the surface of a liquid. In papermaking process, scum indicates the floated solid waste generated by a flotation process during the primary wastewater treatment. In this study, different kinds of stocks and scums collected from newspaper, liner, tissue and fine paper were analysed in details. The purpose of this study was firstly to demonstrate the composition characteristics of different sources of scum, secondly the analysis of environmental hazardous materials, and thirdly the evaluation of reutilization ability of fibrous materials from collected scum. As mentioned the meaning of solid waste, scum was actually differ from the waste sludge in sources, compositions and recycling abilities. In the same manner of waste paper, the sludge which is generated within onsite of papermaking processes would be reused as a raw material. The general compositions of scum from waste water were mainly inorganic ash materials, fine fibre fractions, recycled fibre debries, and ink particles. If the scum is able to reuse as fibrous additives in papermaking process, it could contribute to the savings of running costs in both the subsidiaries of fibrous material and the solid waste treatment with even small quantity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1992.10a
• /
• pp.1-4
• /
• 1992

This paper deals with the effect of siliceous slurry coating on concrete microstructure under damp environment. This material is mixed inorganic powder consisted of silica, cement and fine sand and water. Water pressure was given on the coated surface of concrete. for estimation on effect of siliceous slurry coating, microstructure of coated concrete was observed through SEM, and chemical components of crystals were analyzed with X-ray diffraction and EDX. A number of needle and fibrous crystals were produced in microstructure. And based on X-ray diffraction and EDX, needle crystal mainly consist of Al, Si, and Ca, and it is concluded to be ettringite. Fibrous crystals consist of Ca and Si, and it to be calcium silicate hydrate.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.5
• /
• pp.464-469
• /
• 2007

The bone graft materials are grossly divided into autogenous bone, allogenic bone, xenogenic bone, and alloplastic material. Among the various allogenic graft materials, hydroxyapatite($Ca_{10}(PO_4)_6(OH)_2$, HA), the main inorganic phase of human hard tissue, is widely used as a repair material for bones. When HA applied to bony defect, however, it may be encapsulated with fibrous tissue and floated in the implanted area by the lack of consolidation. Fluoridated hydroxyapatite($Ca_{10}(PO_4)_6(OH)_2$, FHA), where F- partially replaces the OH- in the hydroxyapatite, is considered as an alternative material for bone repair due to its solubility and biocompatibility. This study was designed to find out the bone healing capacity of FHA newly produced as a nanoscale fiber in the laboratory. We implanted HA and FHA in the rabbit cranium defect and histologically analysed the specimen. The results were as follows. 1. In the 4 weeks, fibrous connective tissue and little bone formation around materials of the experimental group I implanted HA were observed. In the experimental group II implanted FHA, newly formed bone around materials were observed. 2. In the 8 weeks, the amount of newly formed and matured bone of the experimental group II was more than the experimental group I and control group. From the results obtained, we suggest that FHA, newly synthesized, is relatively favorable bone substitute with bioconpatibility and has better bone healing capacity than pure HA.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.5
• /
• pp.380-385
• /
• 2011

Introduction: Hydroxyapatite ($Ca_{10}(PO_4)_6(OH)_2$, HA) is the main inorganic phase of human hard tissue that is used widely as the repair material for bones. When HA is applied to a bony defect, however, it can be encapsulated with fibrous tissue and float in the implanted area due to a lack of consolidation. Bioceramics as allogenic graft materials are added to HA to improve the rate and bone healing capacity. Fluoridated hydroxyapatite ($Ca_{10}(PO_4)_6(OH,F)_2$, FHA), where F- partially replaces the OH- in hydroxyapatite, is considered a good alternative material for bone repair owing to its solubility and biocompatibility. Materials and Methods: This study was designed to determine the bone healing capacity of FHA newly produced as a nanoscale fiber in the laboratory. HA and FHA with bioglass was implanted in a rabbit cranium defect and the specimen was analysed histologically. Results: 1. At 4 weeks, fibrous connective tissue and little bone formation was observed around the materials of the experimental group I implanted HA and bioglass. Newly formed bone was observed around the materials in the experimental group II implanted FHA and bioglass. 2. At 8 weeks, the amount of newly formed and matured bone was higher in experimental group II than in experimental group I and the control group. Conclusion: These results suggest that FHA and bioglass is a relatively favorable bone substitute with biocompatibility and better bone healing capacity than pure HA and bioglass.

• Composites Research
• /
• v.36 no.2
• /
• pp.126-131
• /
• 2023

Growing environmental concerns regarding pollution caused by conventional plastics have increased interest in biodegradable polymers as alternative materials. The purpose of this study is to develop a 100% biodegradable nanocomposite material by introducing organic nucleating agents into the biodegradable and thermoplastic resin, poly(lactic acid), to improve its properties. Accordingly, cellulose nanofibers, an eco-friendly material, were adopted as a substitute for inorganic nucleating agents. To achieve a uniform dispersion of cellulose nanofibers (CNFs) within PLA, the aqueous solution of nanofibers was lyophilized to maintain their fibrous shape. Then, they were subjected to primary mixing using a twin-screw extruder. Test specimens with double mixing were then produced by injection molding. Differential scanning calorimetry was employed to confirm the reinforced physical properties, and it was found that the addition of 1 wt% CNFs acted as a reinforcing material and nucleating agent, reducing the cold crystallization temperature by approximately 14℃ and increasing the degree of crystallization. This study provides an environmentally friendly alternative for developing plastic materials with enhanced properties, which can contribute to a sustainable future without consuming inorganic nucleating agents. It serves as a basis for developing 100% biodegradable green nanocomposites.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.77-85
• /
• 2012

Production process of the flexible ceramic foamed body through the complexation with the fiberous sepiolite and expanded pearlite was researched. The processing of fibrillation of the inorganic mineral fiber sepiolite is the most important whole processing for manufacturing of the ceramic foamed body consisting of the expanded perlite and sepiolite. The fibrous sepiolite and expanded pearlite are blended and becomes the slurry phase. And this slurry phase is converted to a massive foamed body through the low temperature heat treatment process less than $300^{\circ}C$. The heat-treatment process of the slurry phase composite has to be designed to include the evaporation step of the moisture remaining among the slurry composition, foaming step by the decomposition of the foaming agent, and resolution removal step of the organic material which was added in the composite remained after the foaming step. The heat treatment process should be considered as significant factors in design of total process. As to the condition of heat treatment process and foaming agent, there was the a correlation. An organic type foaming agent like DSS (dioctyl sodium sulfosuccinte) was effective in foaming of the slurry compound consisting of the expanded perlite and sepiolite fiber.