• 한국식품영양과학회지
• /
• 제10권1호
• /
• pp.107-116
• /
• 1981

This experiment was attempted to establish the optimal condition, e.g., the effects of pH, interferences of other elements, for the determination of the inorganic elements in the paddy soils by atomic absorption spectrophotometry. Inorganic elements of 100 paddy soils which were sampled in Jeon bug provincial farm land were determined by atomic absorption spectrophotometer in that condition. The results obtained in this experiment are summarized as follows: 1) The optimal pH for determination of inorganic elements in paddy soils is about 7.0. 2) It was investigated that the absorbance of potassium was increased, and that of calcium, magnesium and zinc was decreased by adding of $Fe^{++}$ and $Cu^{++}$ in the sample. 3) It was shown that paddy soils in Jeonbug provincial farm land contain the normal amounts of inorganic elements (K, Ca, Mg, Zn,). But comparing to the results of 1976 year, it was known that the contents of inorganic elements in paddy soils considerably was changed.

• Tribology and Lubricants
• /
• 제19권3호
• /
• pp.159-166
• /
• 2003

This research for replacement of chlorine or sulfur based EP(extreme pressure) -additives which is restricted materials by environmental regulation. The subject of this study is as follows, 4-ball test and friction coefficient test were experimented in accordance with temperature and velocity, compounding with several organic or inorganic metallic elements. After 4-ball test, wear area of steel ball was analysed by SEM-EDX. As the analysis, organic and inorganic elements make a effect for extreme pressure lubricity. It is shown that the friction coefficient of lubricant which includes chlorine or sulfur additives, the scoring phenomenon is found accord-ing to temperature and the scuffing phenomenon at 200$^{\circ}C$. Applying to Na, P, S, Zn, Ca based on inorganic and organic elements, the result showed that friction coefficient is decreased more and more, as increasing temperature of lubricant. The additive based on S, Cl, P elements is effect far extreme pressure in the sample#1 and Na, P, S, Zn, Ca in sample #2. These elements are environmental contaminants and S, Cl based on EP additives which are very popular in domestic industry, when they are properly composed with non-chlorine based on additives and Na, P, S, Zn, Ca organic or inorganic elements. It is showed that lubricity and excellent anti-wear properties.

• 한국균학회지
• /
• 제16권4호
• /
• pp.242-246
• /
• 1988

To determine contents of inorganic elements of Laccaria, the carpophores of Laccaria laccata(Fr.) Berk. et Br., Laccaria amethystina(Fr.) Berk. et Br., Laccaria tortilis(S.P. Gray) Cooke and Laccaria vinaceoavellanea Hongo were incinerated and analyzed by atomic absorption spectrophotometer. Total contents of determined inorganic elements(except Cd) were highst in Laccaria tortilis than the other three mushrooms, and Laccaria vinaceoavellanea, Laccaria laccata and Laccaria amethystina in that order. The four species mushrooms contained potassium, iron, zinc, sodium, copper, manganese, and calsium in that order, and the content of potassium was the highst than the other inorganic components. The content of cadmium was Laccaria tortilis, Laccaria laccata, Laccaria vinaceoavellanea and Laccaria amethystina in that order.

• 한국대기환경학회지
• /
• 제16권1호
• /
• pp.11-22
• /
• 2000

Polycyclic aromatic hydrocarbons(PAHs) have known as potentially hazardous air pollutants(HAPs0 to human health because of its carcinogenic and mutagenic behaviors. The purpose of this study was to determine the level of 6 PAHs(Fluoranthene, Pyrene, Benzo[a]anthracene, Chrysene, Benzo[b]fluoranthene, and Benzo[a]pyrene) as well as 10 inorganic elements(Cr, Na, K, Zn, Pb, Fe, Cu, Ti, Al and Cd) in the ambient PM-10. The total of 115 samples had been collected from February, 1996 to June, 1996 on quartz fiber by a PM-10 high volume air sampler near the Yong-Tong Apartment complexes. A statistical analysis was performed for the PAHs and inorganic elements data set using a principal component analysis in order to identify qualitatively the potential sources of PM-10. A total of 6 principal components were separated by intensive data pretrement and transformation processes, such as soil, refuse incineration, oil burning, coal burning, field burning, vehicle emission sources. The results showed that PAHs were associated with various burning activities like refuse and field burning, coal burning, and oil burning emissions in the study area. These derived sources were well matched with the previously known source profiles in terms of compositonal order and level of measured species. The combination data set consisted of both organic and inorganic species might provide more powerful source signature and might increase the number of potentially derived sources than PAHs or inorganic data alone.

• 한국식품영양학회지
• /
• 제32권5호
• /
• pp.401-407
• /
• 2019

This study compares and analyzes inorganic components of four different Pu-erh tea species consumed in Korea. The criteria for the inorganic components was based on the Royal Institute of Technology (KTH) recommendations. Out of the 19 general items: potassium, manganese, silicon and fluorine were detected in amounts exceeding the maximum allowable concentration by 5~23, 57~91, 1.6~1.8 and 9~18 times respectively. Out of the 15 potentially harmful elements: aluminum and nickel were exceeded the Maximum allowable concentration by 9~14 times and 0.8~1.2 times respectively. To reduce the concentration of inorganic elements in excess of the maximum allowable concentration, the extraction time of tea should be less than 1 minute in addition to limiting the amount. The amount of Pu-erh tea for extraction was about 0.1 g manganese, about 0.3 g potassium, about 0.5 g fluoride and about 2 g silicon. Therefore, the maximum amount of tea for extraction should be 0.1 g in regards to the safety of Pu-erh tea. Based on the recommended maximum daily intake of inorganic ingredients by the Ministry of Food and Drug Safety, it is desirable that the number of extractions be less than three.

• 한국약용작물학회지
• /
• 제14권3호
• /
• pp.173-177
• /
• 2006

음나무는 잎을 산채로, 뿌리와 수피를 식의약용으로 다양하게 이용되고 있으며, 최근 농산촌의 신소득 작목으로 재배하기 시작하였다. 본 연구는 엽내 무기성분분석을 통하여 음나무 유묘의 생장에 미치는 영향을 조사하여 향후 재배 및 생산성 향상을 위한 기초자료를 제공하고자 수행하였다. 음나무 유묘의 엽내 무기영양원소는 다량 및 미량 무기성분에 따라 함량차이를 보였으며, N성분이 가장 많았으며, 다음으로 K, Ca, P, Mg, Mn, Fe, Zn 순으로 나타났다. N, P, K 성분은 유묘의 생장과 고도의 정의 상관관계를 나타내었으며, Mg와 Mn은 낮은 정의 상관을 보인 반면, Na과는 높은 부의 상관관계를 나타내었다. 한편 Ca, Fe, Cu, Zn 성분은 유묘의 생장과 상관관계가 인정되지 않았다. 분석된 무기성분 중에서 N, P, K, Mg, Mn, Na 성분은 음나무 유묘의 생장에 영향을 미치는 (P<0.01) 무기성분으로 나타났으며, 특히 N성분은 가장 영향을 미치는 성분으로 나타났다.

• Journal of Ginseng Research
• /
• 제21권2호
• /
• pp.91-97
• /
• 1997

In order to elucidate the mechanism of red-colored phenomena(RCP) in ginseng(Panax ginseng C.A. Meyer), distribution of inorganic elements of ginseng root and its surrounding soil, and microflora in the soil were investigated. Red brown colored-substances were accumulated in the cell wall of epidermis at early stage of red-colored ginseng (RCG). Cell wall of the late stage of RCG was disordered and microorganisms were shown in the disordered cell wall. Al, Si and Fe contents among inorpanic elements in the epidermis of RCG were higher at two or three times than that of healthy ginseng. On the other hand, K content was higher at three times in healthy ginseng than that of RCG. Especially, Fe content was higher at three times in lateral roots of RCG than that of healthy ginseng. Total 21 strains of microorganisms were isolated on the 523 medium from surface soil, surrounding soil of both healthy and RCG, and RCG. Six strains of microorganisms among them were resistant to 2 mM Fe. Two species in Bacillus app. and Lactobacillus app. , and one species in Micrococcus sp. and Npisseria sp. respectively were identified. It seemed that RCP was closely related with the distribution and uptake of inorganic elements, was also correlated Fe-independent metabolism of microorganisms.

• 한국대기환경학회지
• /
• 제15권3호
• /
• pp.291-303
• /
• 1999

The purpose of this experimental study is to investigate seasonal deposition flux variations of the total dustfall and various inorganic elements in it. Total of 84 dustfall samples were collected from September, 1997 thur August, 1998 at 7 different sites in Kunsan. Each sample was analyzed by an AAS to determine the levels of 5 inorganic elements Zn, Cd, Cr, Fe and Pb. Deposition fluxes, soluble/total fractions for each element were extensively investigated. Estimated depositon fluxes of dustfall and elements in Kunsan were in the range of 37.5~45.1 ton/$ extrm{km}^2$/yr for dustfall, 43.5~81.8kg/$\textrm{km}^2$/yr for Zn, 6.6~11.0kg/$\textrm{km}^2$/yr for Cd, 44.8~110.0kg/$\textrm{km}^2$/yr for Cr, 223~323 kg/$\textrm{km}^2$/yr for Fe, 10.9~22.3 kg/$\textrm{km}^2$/yr for Pb, respectively. Thus, the estimated average total deposition fluxes of dustfall in Kunsan(376.35$\textrm{km}^2$) per day were 43.3 ton and 58.6 kg for Zn, 8.9 kg for Cd, 80.6 kg for Cr, 293.8 kg for Fe and 14.1 kg for Pb, respectively.

• 복식
• /
• 제49권
• /
• pp.49-63
• /
• 1999

This research utilized the Energy Dispersive X-ray Spectroscopy(EDS) and the Inductively Coupled Plasma Mass Spectrometry in the analysis of chemical elements present among the textiles exhumed from Kupori Hwasung-kun Kyunggi-do. The two research objectives were: first to examine the elements present and their percent presence in Kupori samples: second to investigate whether the elements are part of mordant substances which could have been used when dyeing the KUpori textiles in the past. To meet such research purposes standard silk fabric was dyed with Sophorajaponica using alum and iron mordants. For alum mordant unpurified general alum and potassium aluminum sulfate(AlK(SO4)2). iron sulfate(FeSO4·7H2O) were used, From the results of EDS and ICP-Mass analysis the following conclusions were drawn. 1 According to the EDS analysis 9 elements Ca, S, Al, Si, K, Fe, P, Mg and Na were detected. 2. ICP-Mass result of the mordant chemicas showed high amount of A, Al and k present in alum mordants and S and Fe present in iron mordants. 3. Comparison of the ICP-Mass results of the mordant chemicals and those of the standard dyed samples suggested that the amount presence of Al and Fe is a strong indication of the usage of alum and iron mordants respecticely in an unknown dyed textile. 4, In the washed Kupori textiles Fe showed a relatively higher rate of presence in the samples Therefore it can be conjectured that those Kupori textiles were dyed with iron mordant based on the result of the above number 3. 5. It is probable that the other elements detected from the Kupori samples were incorporated into the textiles as part of the soil debris produced from the degradation of the dead within the coffin or the earth debris. They can also be part of the inorganic compounds inherent in the silk textiles themselves before dyed. 6. Among the elements it is likely that Ca which showed a high degree of presence among the unwashed samples was part of the inorganic compound inferent in the silk textiles.

• 환경위생공학
• /
• 제17권2호
• /
• pp.71-78
• /
• 2002

This study was conducted to evaluate the concentration distribution characteristics of air pollutants by the yellow sand from China. The concentrations and chemical properties of FPM contained in the yellow sand were compared with those of air pollutants when having no yellow sand in order to estimate the variation characteristics and the originated source of air pollutants moved by yellow sand. The concentrations of PM-2.5 and PM-10 contained in the yellow sand showed an increase of 2.3 to 2.7 times than usual, and the concentrations of NO2 and SO2 in the gaseous pollutants showed an increase of about 1.6 times by yellow sand, and thus the air contamination was much influenced by yellow sand phenomenon. The concentrations of inorganic elements contained in FPM from the yellow sand showed a higher concentration variation in the order of Al>Mg>Zn>Pb than usual. The concentration coefficient of air aerosol during the yellow sand period showed that Na, K, Ca, Mg and Fe were originated from natural source, and Pb, Cr, Cd, Cu and Zn were originated from artificial source for inorganic elements. The correlation analysis between FPM and inorganic elements showed in the descending order of Al>K>Pb>Mg, and thus the deposited amount of Pb was influenced by that of yellow sand. The average concentrations of PM-10 measured during the yellow sand period exceeded the Korea Air Environmental Standard and showed a excess rate of 3.4 times in the maximum but the average concentrations of PM-2.5 showed within the United States Air Environmental Standard.