• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.3
• /
• pp.261-268
• /
• 1995

In transforming $K_2Ti_4O_9$ whisker, synthesized by calcination and slow cooling method, into $K_2Ti_6O_{13}$ whisker with boiling water and hydrochrolic acid, the effect of their treatment time and concentration on phase transformation, surface state and scattering of whisker was examined. The result was that the surface state of whisker was improved and whisker with a small diameter and a considerable aspect ratio was obtained by inducing scattering of a bundle of whisker. The treatment by boiling water and hydrochrolic acid induced the phase transformation of $K_2Ti_4O_9$ into $K_2Ti_6O_{13}$ and the phase transformation proceeded by extration of $K^+$ ion.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.3
• /
• pp.463-470
• /
• 1996

Ceramic membrane consisting of an ${\alpha}-Al_{2}O_{3}$ support and Fe doped $TiO_{2}$ top layer was prepared by the sol-gel method. The supported Fe doped $TiO_{2}$ top layer was made by dip coating the support in a mixed sol. The microstructure of the composite membranes was studied by SEM after calcination at $550~850^{\circ}C$. After sintering at $650^{\circ}C$ for 1 hr., the average particle diameter of the Fe doped $TiO_{2}$ top layer was ~40 nm. The supported Fe doped $TiO_{2}$ composite membranes exhibited much higher heat resistance than the $TiO_{2}$ membrane. The Fe doped $TiO_{2}$ composite membrane retained a crack-free microstructure and narrow particle size distribution even after calcination up to $650^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.4
• /
• pp.166-171
• /
• 2006

[ $Cu_2O$ ] and Cu have been synthesized from the layered organic-inorganic hybrid, $Cu_2(OH)_3(CH_3COO){\cdot}H_2O$, assisted by microwave irradiation. $Cu_2O$ is formed in aqueous glucose solution, while metallic Cu is formed in ethylene glycol by reduction of $Cu_2(OH)_3(CH_3COO){\cdot}H_2O$. The influence of microwave irradiation time and concentration of glucose on $Cu_2O$ particles formation and growth has been examined. The morphologies of $Cu_2O$ particles change from spheres with a few fm size to nanowires with diameter of 40 nm as increasing the microwave irradiation times.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.165-174
• /
• 1995

A stable suspension with a colloidal $ZrO_2$ particle was prepared by an adsorption of PV A and investigated to the effects of PV A on the dispersion and particle growth within suspension. With a suspension added the optimum concentration of PYA (about 500 ppm in this study), it was shown the property of a stable sol due to the formation of adsorbed PV A layer on surface and the reduction of an agglomeration among the particles. Most of nucleation in colloidal $ZrO_2$ were occured in the early stage of hydrolysis reaction and the plate-like monoclinic $ZrO_2$ particle were grown with an aging time. The rate of particle growth and yield for a reaction were decreased with an addition of PV A. The compact prepared from well- dispersed suspension by an addition of PV A was contained the homogeneous particle arrangement and pore distribution.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.251-252
• /
• 2012

Recently, the growing interest in organic microelectronic devices including OLEDs has led to an increasing amount of research into their many potential applications in the area of flexible electronic devices based on plastic substrates. However, these organic devices require a gas barrier coating to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency OLEDs require an extremely low Water Vapor Transition Rate (WVTR) of $1{\times}10^{-6}g/m^2$/day. The Key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required ($1{\times}10^{-6}g/m^2$/day) is the suppression of defect sites and gas diffusion pathways between grain boundaries. In this study, we developed an $Al_2O_3$ nano-crystal structure single gas barrier layer using a Neutral Beam Assisted Sputtering (NBAS) process. The NBAS system is based on the conventional RF magnetron sputtering and neutral beam source. The neutral beam source consists of an electron cyclotron Resonance (ECR) plasma source and metal reflector. The Ar+ ions in the ECR plasma are accelerated in the plasma sheath between the plasma and reflector, which are then neutralized by Auger neutralization. The neutral beam energies were possible to estimate indirectly through previous experiments and binary collision model. The accelerating potential is the sum of the plasma potential and reflector bias. In previous experiments, while adjusting the reflector bias, changes in the plasma density and the plasma potential were not observed. The neutral beam energy is controlled by the metal reflector bias. The NBAS process can continuously change crystalline structures from an amorphous phase to nano-crystal phase of various grain sizes within a single inorganic thin film. These NBAS process effects can lead to the formation of a nano-crystal structure barrier layer which effectively limits gas diffusion through the pathways between grain boundaries. Our results verify the nano-crystal structure of the NBAS processed $Al_2O_3$ single gas barrier layer through dielectric constant measurement, break down field measurement, and TEM analysis. Finally, the WVTR of $Al_2O_3$ nano-crystal structure single gas barrier layer was measured to be under $5{\times}10^{-6}g/m^2$/day therefore we can confirm that NBAS processed $Al_2O_3$ nano-crystal structure single gas barrier layer is suitable for OLED application.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.11
• /
• pp.1224-1230
• /
• 2001

Single crystals of nanocomposite [GaO4Al12(OH)24(H2O)12][Al(OH)6Mo6O18]2(OH)${\cdot}$30H2O, 2, were obtained by the reaction between [GaO4Al12(OH)24(H2O)12]7+ and [Mo7O24]6- clusters in an aqueous solution, analogously to the [AlO4Al12(OH)24(H2O)12][Al(OH)6Mo6O18]2(OH)${\cdot}$29.5H2O nanocomposite, 1. The crystal structure of 2 was determined by single crystal x-ray diffraction; space group $C2}c$ (No. 15), a = 27.418(2) $\AA$, b = 15.647(2) $\AA$, c = 23.960(4) $\AA$, $\beta$ = $102.850(9)^{\circ}$, V = 10,021.5(20) $\AA3$ , Z = 4. Detailed analysis of the structural data show that the clusters are held by intimate hydrogen bondings of the surface O2- and OH- groups of the clusters as well as the ionic interactions between the oppositely charged cluster ions.

• Korean Journal of Materials Research
• /
• v.6 no.5
• /
• pp.504-514
• /
• 1996

고상반응법과 sol-gel법으로 제조된 NASICON의 상온과 25$0^{\circ}C$에서의 X선 회절 데이터를 리트벨트 분석을 행하였다. monoclinic에서 rhombohedral로 상전이가 일어나도 원자들의 변위는 매우 작았다. 이들 상간의 ZrO6 팔면체와 Si(P)O4 사면체고 구성된 골격은 다소 다르게 나타남으로 인하여 Na 이온의 자리도 변하였다. 이들 방법으로 제조된 NASICON은 Zr이 부족한 비화학양론 화학식, Na 1+x+4yZr2-xSixP3-xO12으로 표현될 수 있었다. 제조법에 따라 Na 이온들의 자리 점유율이 변화하였다. 상온에서는 Na(1)과 Na(3)자리의 자리 점유율의 합이 거의 1에 가까웠으나, 25$0^{\circ}C$에서는 Na(1)과 mid Na 자리를 단위 화학식 당 한 개를 약간 상회하는 Na 이온이 점유하였다. 상온과 25$0^{\circ}C$에서의 Na 이온의 이동 경로가 다름을 알 수 있었다. 또한 25$0^{\circ}C$에서는 Na(1)자리와 Na(2)자리 사이에 mid Na가 존재하며, 이 자리가 Na 이온의 이동에 중요한 역할을 함을 알 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.24 no.4
• /
• pp.343-348
• /
• 1987

The effects of salts such as aluminum sulfate as inorganic salt(2-4%), and sodium salts of citrate, tartrate, succinate, potassium tartrate and gelatin as organic salts(0.1%) on the formation of ${\alpha}$-calcium sulfate hemihydrate from by-product gypsum of phosphoric acid process under hydrothermal condition at 123$^{\circ}C$ and 133$^{\circ}C$ were investigated. Aluminum sulfate solution exhibited the catalystic effected on the crystallization of ${\alpha}$-calcium sulfate hemihydrate of which was assumed in the prismatic form, and organic salts solution exhibited little effect on the catalystic action to the crystallization, than inorganic salts. In the acidic solution with sulfuric acid(pH=2), needle like crystal of calcium sulfate hemihydrate was obtained. Hydrothermal process with aluminum sulfate solution also showed certain amounts of impurity removal such as phosphorus penataoxide from calcium sulfate hemihydrate.

• Journal of the Korean Ceramic Society
• /
• v.43 no.1 s.284
• /
• pp.1-3
• /
• 2006

Well-shaped NaA zeolite cubic crystals of a large size of $5-7{\mu}m$ were synthesized by a hydrothermal method in a mother solution having a $3.55Na_2O:Al_2O_3:1.6SiO_2:593\~2000H_2O$ composition. Thermal treatment of NaA zeolite crystals resulted in the formation of a crystalline phase of $NaAlSiO_4-Camegeite$ between 800 and $900^{\circ}C$. Even at $1000^{\circ}C,\;NaAlSiO_4$ phase was found as a major product. Environmental Scanning Electron Microscopy (ESEM), High Resolution Transmission Electron Microscopy (HRTEM), X-Ray powder Diffraction (XRD), Fourier Transform Infrared (FT-IR) spectroscopy, and DTA/TGA and BET analyses were used to characterize the initial materials and the obtained products after various heat treatments.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.328-329
• /
• 2005

Inorganic alignment layer (IAL) was deposited on an indium-tin-oxide (ITO) by using reactive sputtering deposition method. After deposited, IAL was irradiated by $Ar^+$ ion beam (IB) for liquid crystal (LC) alignment. IAL treated by various conditions such as IB energy, IB incident angle, and IB irradiation time had excellent alignment property and electro-optical property the same as that of PI. We investigated into the stability of ion beam treated IAL after a lapse of long time. However IAL irradiated IB did not occur degradation of electro-optical property. The results implied that IAL irradiated IB was adopted as LC alignment layer instead of rubbed polyimide.