• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.1
• /
• pp.50-60
• /
• 2012

This study was carried out to evaluate the ecotoxicological effects of Alum and Ferric chloride on the population of Eisenia fetida in vermicomposting of sewage sludge. Using contact filter toxicity test, it was shown that LC50 of Alum and Ferric chloride on adult Eisenia fetida were 457.4 mg $kg^{-1}$ and 1,665.2 mg $kg^{-1}$, respectively,which meant Ferric chloride had much higher acute toxicity on earthworm than Alum. Alum didn't affect on cocoon production, hatchability and number of hatched larvae of Eisenia fetida. Ferric chloride didn't have any efects on number of hatched larvae per cocoon, but reduced cocoon production and hatchability. Larval density of next generation was reduced by the food containing Alum and Ferric chloride. Above results indicated that the Alum and Ferric chloride could be one of the hazardous materials that made extinction of earthworm population when the sewage sludge treated with Alum and Ferric chloride was supplied to the earthworms.

• Resources Recycling
• /
• v.17 no.3
• /
• pp.3-9
• /
• 2008

The measurement of physicochemical properties and chemical composition of SSA(sewage sludge ash) has been carried out and the preparation of lightweight material has also been performed using SSA for reuse as building or construction materials. For this aim, lightweight material has been prepared by forming the mixture of SSA, lightweight filler and inorganic binder followed by calcination at elevated temperature and characterized in terms of density and compressive strength. The pH of fly ash was found to be slightly alkaline, pH 8.69, due to the addition of caustic soda in order to neutralize the acidic gas while the pH of bottom ash was 6.48 Heavy metal leachability based on the standard leach test was also found to be below the detection limit for Cd, Cu, Pb, As and Cr of SSA. As far as the compressive strength of lightweight material was concerned, the compressive strength of lightweight material using fly ash was higher than that of lightweight material using bottom ash.

• Korean Journal of Agricultural Science
• /
• v.18 no.1
• /
• pp.74-79
• /
• 1991

In order to use of new organic matter source, soil samples collected from paddy, upland and orchard treated with kraft and paper board mill sludge were analysed comparing with non-treated soil in view of some soil properties, soil microorganisms and soil enzyme activities. Also, the value of fertilizer was estimated with kraft and paper board mill sludge. 1. Paper mill sludge showed more than 55% of organic matter content, and higher total nitrogen and phosphorus, and CEC. 2. Soils treated with kraft sludge were higher contents than non-treated 2.5-3 for organic matter, 1.5-2 for total-nitrogen, 2 for $NO_3$-N, 1.5 for phosphorus and 1.4 times for CEC. Also, 12-1.9 for bacteria and 3 times for fungi, and 1.4-1.5 of cellulase, 1.5-1.8 of phosphatase and 1.5-1.8 times of urease activities. 3. Organic matter contents, number of fungi, and activities of cellulase and phosphatase in soil treated with paper board sludge were 1.4-22, 2.4, 1.5-1.6 and 1.3-1.4 times higher than non-treated soil, respectively. 4. Paper mill sludge was evaluated as a good organic matter source to increase of soil organic matter, CEC, inorganic components, soil microbes and enzyme activities.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1116-1122
• /
• 2008

The existing technology which is for recycling aggregate using dried swage sludge have been limited for practical application, because the properties of aggregate are not regular and don't meet the recycling aggregate standard. In this research, an innovative slag-producing technology is developed by addition of oyster shell, waste cast-sand and iron-rust as inorganic waste additives. The mixed slag with the additives was evaluated at the various ratio of CaO/SiO$_2$, SiO$_2$/Al$_2$O$_3$ and Fe$_2$O$_3$/SiO$_2$. When the waste sludge was melted at 1,400$^{\circ}C$ during 20 minutes, the optimal ratio of CaO/SiO$_2$ for the slag added the oyster shell, SiO$_2$/Al$_2$O$_3$ for added the waste cast-sand and Fe$_2$O$_3$/SiO$_2$ for added the iron-rust were 1.00, 3.00 and 0.60, respectively. At the optimal condition, the bulk density of the slag was 2.24 g/cm$^3$, 2.45 g/cm$^3$ and 2.73 g/cm$^3$, And the 24 h water adsorption was 4.72%, 1.44% and 0.37%, respectively. Therefore it is proved that adding the waste additives to the process of the slag production contributed for elevation of recycling aggregate properties. And also it is expected that production cost can be reduced by decreased melting temperature.

• Applied Biological Chemistry
• /
• v.25 no.2
• /
• pp.99-104
• /
• 1982

Natural zeolite rock was pulverized and dispersed in water. Clay fraction was collected by sedimentation method. The dominant clay mineral was Clinoptiolite with some Mordenite and Smectite. $P^{32}$ adsorption on Na-zeolite was determined in different ionic strengths using $P^{32}$ isotope by sludge method. The lower the pH of suspension, the longer the contact time, and the more the amount of zeolite, the more inorganic P was adsorbed by Na-zeolite, whereas the more P adsorption per unit gram of zeolite was observed at a 100mg addition than a 200mg in same volume of P-NaCl solution (20ml), indicating that the whole positively charged surface of Na-zeolite was not occupied by inorganic P. Furthermore, the more P adsorption on Na-zeolite was observed in higher ionic strength than in the lower. The maximum P adsorption on Na-zeolite was about 1me/g, and the zero point charge (ZPC) is assumed to be below pH 3.7.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.189-196
• /
• 1998

Swage sludge cakes produced from domestic wastewater treatment plants were collected from 21 different sites throughout Korea, and chemical properties of the sludge samples were determined. Inorganic nutrient contents did not indicate great differences among swage sludges from each sites, whereas the toxic heavy metal contents differed greatly. T-N, $NH_4{^+}-N$ and $NO_3{^-}-N$ contents from 21 sites sludges ranged 2.3-6.0, 291-4284, $1.4-58.8mg\;kg^{-1}$, respectively. Heavy metal (Cd, Cu, Pb and Zn) contents ranged 2.86-58.22, 144.0-5417.3, N.D.-943.5, and $N.D.-8,083mg\;kg^{-1}$, respectively. One of the sludges was treated to soils at rates of 12.5, 25, 50. and 100, $Mg\;ha^{-1}$ and incubated for 12 weeks to determine nitrogen materialization rate. Ammoniun nitrogen content decreased sharply at higher rates of sludge treatment up to 8 weeks after treatment and did not change much, while $NO_3{^-}$ increased at all treatment levels. The net amount of mineralized N of sludge treatment rates (12.5, 25, 50, and $100Mg\;ha^{-1}$) during 12weeks incubation were 189.0, 277.2, 303.8 and $376.6mg\;kg^{-1}$.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.5
• /
• pp.316-322
• /
• 2002

A newly isolated heterotrophic marine bacterium, Vibrio alginolyticus, was used to remove a high load of ammonia gas under non-sterile condition. The cells were inoculated onto an inorganic packing material in a fixed-bed reactor (biofilter), and a high load of ammonia, in the range of ammonia gas concentration of 170 ppm to 880 ppm, was introduced continuously. Sucrose solution and 3% NaCl was supplied intermittently to supplement the carbon source and water to the biofilter. The average percentage of gas removed exceeded 85% for 107-day operation. The maximum removal capacity and the complete removal capacity were$19\;g-N\;kg^{-1}$ dry packing material $day^{-1}$ and $16\;g-N\;kg^{-1}$ dry packing material $day^{-1}$, respectively, which were about three times greater than those obtained in nitrifying sludge inoculated onto the same packing material. On day 82, the enhanced pressure drop was restored to the normal one by NaOH treatment, and efficient removal characteristics were later observed. During this operation, the non-sterile condition had no significantly adverse effect on the removability of ammonia by V. alginolyticus.

• Journal of the Korean Ceramic Society
• /
• v.46 no.1
• /
• pp.94-101
• /
• 2009

The physical properties of artificial aggregates made from clay and inorganic wastes with poor plasticity depends largely on forming method. The artificial aggregates composing of coal fly ash, stone sludge and clay were fabricated using 4 different forming methods and those physical properties were comparatively analyzed. The surface of aggregates made through the extrusion forming process was dense and smooth but was rough for the aggregates obtained by crushing a tile-shaped green body. The aggregates made by pelletizing process had a weak green strength and bumpy surface. The shell generated at surface during a high temperature sintering process induced the most aggregates to be bloated due to a dense shell. But the aggregates made through pelletizing process with dense surface layer showed no significant change in bulk density with sintering temperatures. The water absorption of aggregates decreased with sintering temperature, and that of pelletized specimen was standing $1.8{\sim}2.2$ times higher than that of made by other forming methods. It is concluded that the aggregates having various properties could be fabricated from one batch by using different forming methods.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.2
• /
• pp.181-193
• /
• 2014

Various treatment system for residuals have applied to save water resources, but most of them were not be satisfied with legal standard consistently. In this study, submerged membrane treatment system was operated to treat water treatment plant residuals and operation parameters was evaluated. Result of this experiment, high concentration organic matters contributed to high increase Transmembrane pressure(TMP) of membrane system(from 0.05 bar to 0.35 bar). And backwash process was effective to stabilize membrane system operation. After Cleaning-In-Place(CIP), permeability was recovered about 100 % from first operation condition. Inorganic matters (Fe, Mn, Al, Ca, Mg) were not effective membrane filtration performance. The quality of residual treatment was satisfied with drinking water quality standard and a treated water from that system was suitable for water reuse.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.441-444
• /
• 2006

A lot of water is using in the paper mill for dilution, washing, sealing, and other process operation. As the regulation of water environment has been more tightened than ever before, water management in the paper mill becomes the most important task. Topics on reducing fresh water and increasing recycling water have been studied. Further, an interest in zero-effluent system has been increased. The pH of waste water in paper mill is usually weak acidic or neutral. The waste water in the paper mill includes water insoluble organic materials that are not easy to be dissolved in the water, inorganic materials that never react with water and chemical additives that are used to recycled fiber. This study investigated on the effect of various materials used in paper mill on COD. This data could be used to control the environmental load in paper mill. COD caused by raw materials and NBDCOD (Non Bio Degradable COD) after the activated sludge process are investigated in this study. Results obtained in this study can be used in a simulation program designed to control environmental load in the paper mill.