• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.4
• /
• pp.281-289
• /
• 2013

This study was conducted to investigate the effects of feeding seleniferous whole crop barley silage (WCBS) on the growth performance, blood and carcass characteristics, and tissue selenium deposition infinishing Hanwoo steers. A total of 20 growing Hanwoo steers were selected and assigned to one of the following feed groups: control (0.1 ppm Se), T1 (0.3 ppm Se), T2 (0.9 ppm Se), and T3 (0.9 ppm of inorganic Se). Five steers were allocated to each treatment group, and the trial lasted for 90 days. All experimental diets combined seleniferous and/or non-seleniferous WCBS up to a ratio of 30%. For the T3 diet, 0.9 ppm Se in the form of sodium selenite was added to the control diet. Dietary level and type of selenium did not affect feed intake and body weight gain. Blood total lipid and triglyceride concentrations were significantly (p<0.05) lower in the T2 group than in control. Blood immunoglobulin G concentration increased significantly (p<0.05) with increasing levels of dietary selenium; concentrations were significantly (p<0.05) higher in T2 and T3 than in control. Blood selenium concentration was the highest (p<0.05) in T2. No significant difference was observed in dressing rate, ribeye area, marbling score, meat color and fat color. Further, no association was found between levels and chemical form of dietary selenium and quality and quantity of meat. To the contrary, tissue selenium content in kidney, liver, and hind leg increased significantly (p<0.05) with increasing levels of selenium; however, feeding inorganic selenium did not introduce a significant increase in tissue selenium content of finishing Hanwoo steers. The results indicated that the selenium present in seleniferous WCBS was an effectively absorbable selenium source, suitable for increasing tissue selenium content in beef. Approximately 100 g of hind leg muscle from steers fed on the T2 diet met approximately 69% of the recommended daily selenium requirements.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.5
• /
• pp.479-490
• /
• 1998

The concentrations of ten inorganic (sodium, chloride, sulfate, ammonia, etc.) and three organic (acetate, formate, and MSA) ions associated with airborne particulate matter were measured from Cheju Island, Korea during the three field intensive campaigns conducted in (1) Sept./oct. 1997 (fall), (2) Dec. 1997 (winter), and (3) April 1998 (spring). The results of our measurements indicated that the concentration levels of most ionic species were decreasing significantly across the three experimental periods. The patterns of concentration reduction were clear as the sum of all cation and anion species changed dramatically across those periods such as 294> 144 > 65 and 193 >96>74 nequiv/m3, respectively. The changes were best explained in terms of the wind rose patterns of the study site. Since our sampling spot is located on the western-end point of Cheju Island, it is likely to reflect the effects of diverse sources such as natural, marine processes during NW and local non-maritime ones during SE winds. .Hence, the periodical changes in ionic concentrations may be accounted for by the comparable changes in wind direction. To further investigate environmental characteristics of these ionic components, correlation analysis was conducted not only between meteorological and ion data but between different ion-pairs. The results of these analyses confirm that the concentration levels of ionic species are strongly affected by wind speed and temperature and that there are certain patterns between ion species to which such effects apply. In light of the significance of the wind rose patterns in the area, we further extended these analyses into four data groups that were divided on the basis of wind direction. The results of these analyses showed that the strength of correlations between important pairs (e.g.:. between windspeed and most of major inorganic species including sodium and chloride) can be ranked on the distribution of major ions are very diverse, depending on data grouping scheme for such analysis. The results of this study thus suggest that environmental behavior of chemical components be analyzed in various respects, rather than simple standard, especially if measurements are made in complex environmental condition under which both natural and anthropogenic effects are competing each other.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.457-464
• /
• 2023

The rendering residue generated by rendering disposal, an eco-friendly livestock carcass disposal method, is a useful agricultural resource. Methods for recycling this are being actively researched, and this study investigated the impact of applying rendered residue directly to soil on crop productivity and the agricultural environment. The chemical properties of the rendering residue were examined. The pH, OM, T-N, T-P, CaO, K₂O, and MgO content values were 5.47%, 59.8%, 9.22%, 2.96%, 2.16%, 0.51% and 0.10%, respectively. Treatment conditions were divided into control, inorganic fertilizer, and rendering residue, and rendering residue corresponding to 50, 100, and 200% nitrogen content was applied based on the amount of inorganic fertilizer nitrogen input. Greenhouse gases and ammonia were collected during the cultivation period. Rendering residue increased both the yield and growth of peppers and was effective in improving nutrients such as pH and OM of the soil after harvest. However, compared to inorganic fertilizer treatment, it increased emissions of nitrous oxide and methane as well as ammonia. It is judged that the direct agricultural use of rendering residue is difficult, and a utilization method is needed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.5
• /
• pp.557-562
• /
• 1996

The effects of diets differing in protein content through soybean meal supplementation on ruminal fractionation of selenium (Se) were studied. A $3{\times}3$ Latin square design was used with three Japanese Corriedale wethers (45 kg average body weight), three periods, and three dietary treatment. The three dietary treatments were : Diet 1, without soybean meal supplementation (14% crude protein, CP); Diet 2, with 10% soybean meal supplementation (16.5% CP); and Diet 3, with 20% soybean meal supplementation (19% CP). All the diets had a Se supplementation in the form of sodium selenite at 0.2 mg Se/kg dietary DM. The Se supplement and the concentrate mixture were fed only in the morning before the hay was given. Daily feeding schedule for gay was set at 09:00 and 17:00 h. On the final day of collection period, ruminal fluid samples were obtained at 0.5, 2, 6, 12 and 24 h post-feeding starting at 09:00 h. Total ruminal fluid Se was markedly higher (p<0.05) in Diet 3 than those in Diets 1 and 2 at almost all sampling time except at 24 h. The proportion of Se in soluble protein to the total ruminal Se was higher (p< 0.05) in Diet 3 (40%) followed by Diet 2 (28%) and Diet 1 (21%). The proportion of free inorganic Se to the total ruminal Se was the reverse, especially after two hours where Diet 1 (p<0.05) was higher than the other diets. Bacterial Se was lower (p < 0.05) in Diet 1 than those in Diets 2 and 3 at any sampling time. The highest was observed at 2 h postprandially in all diets with a value of 421, 556, $655{\mu}g/kg$ bacterial DM for Diet 1, 2 and 3, respectively. No differences (p>0.05) were observed on ruminal pH, ammonia and total nolatile fatty acids although increasing protein supplementation tended to decline the ruminal pH and increase ruminal ammonia. This study concludes that increasing dietary protein content by soybean meal supplementation can affect the ruminal Se metabolism.

• The Korean Journal of Mycology
• /
• v.34 no.2
• /
• pp.84-87
• /
• 2006

In the present study, an attempt has been made to produce a high quality medicinal mushroom Cordycops militaris supplemented with organic Ge. Cordycops militaris was cultivated in SDAY liquid medium containing yeast extract 10 g, peptone 10 g, glucose 40 g per liter and chrysalis media supplemented with inorganic Ge at 100, 500, 1000, and 5000 ppm concentrations. The greatest organic Ge production of 442.4 ppm/g and 284 ppm/g were observed in SDAY liquid and Chrysalis media cultures supplemented with 100 ppm inorganic Ge respectively. Similarly, 4,509.7 ppm/g and 1,058 ppm/g of organic Ge were obtained from liquid and chrysalis media cultures supplemented with 5,000 ppm and 1,000 ppm inorganic Ge, respectively. In addition, higher concentration of organic Ge was obtained in mycelia than fruiting bodies. These results indicate that the concentration of organic Ge increase with decreasing inorganic Ge concentration in the medium. This is the first report on production of high valuable Cordyceps militaris contained with organic Ge.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.158-163
• /
• 2011

$CuInS_2$ thin films were prepared using a sol-gel spin-coating method. That makes large scale substrate coating, simple equipment, easy composition control available. The structural and optical properties of $CuInS_2$ thin films that include less toxic materials (S) instead of Se, tetragonal chalcopyrite structure. Copper acetate monohydrate ($Cu(CH_3COO)_2{\cdot}H2O$) and indium acetate ($In(CH_3COO)_3$) were dissolved into 2-propanol and l-propanol, respectively. The two solutions were mixed into a starting solution. The solution was dropped onto glass substrate, rotated at 3000 rpm, and dried at $300^{\circ}C$ for Cu-In as-grown films. The as-grown films were sulfurized inside a graphite container box and chalcopyrite phase of $CuInS_2$ was observed. To determine the optical properties measured optical transmittance of visible light region (380~770 nm) were less than 30 % in the overall. The XRD pattern shows that main peak was observed at Cu/In ratio 1.0 and its orientation was (112). As annealing temperature increases, the intensity of (112) plane increases. The unit cell constant are a = 5.5032 and c = 11.1064 $\AA$, and this was well matched with JCPDS card. The optical transmittance of visible region was below than 30 %.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.3
• /
• pp.127-133
• /
• 2012

To achieve low-cost and high-efficiency of thin-film solar cells applications, the sol-gel method that can be coated on a large area substrate, obtain homogeneous thin films of high purity was used. We studied structural and optical characteristics versus annealing temperature of $Cu_2ZnSnS_4$ which has kesterite structure by substitution low-cost sulfur (S) instead of high-cost selenium (Se). By analyzing XRD patterns, main peak was observed at $2{\theta}=28.5^{\circ}$ when Zn/Sn ratio is 0.8/1.2. And when we observed kesterite structure which has orientation of (112) direction, the more annealing temperature increase the bigger strength of (112) direction is. $Cu_2ZnSnS_4$ thin film showed characteristics of kesterite structure at $550^{\circ}C$. And when we calculated lattice constant, a = 5.5047 and $c=11.014{\AA}$ as same JCPDS (Joint Committee on Powder Standards) data measured. We measured optical transmittance to analyze optical characteristics. Optical transmittance was lower than 65 % at visible ray (${\lambda}=380{\sim}770nm$).

• Korean Journal of Optics and Photonics
• /
• v.20 no.4
• /
• pp.230-235
• /
• 2009

Photopolymer is evaluated as better material than the others used for hologram storage, due to many advantages, such as high diffraction efficiency, easy processing, and self-developing. In this study, chalcogenide inorganic compound ($SeO_2$) which has optical activity, was added to polyvinyl alcohol/acrylamide photopolymer films. In order to optimize diffraction efficiency of these photopolymer films, we prepared the photopolymer films with various film thicknesses and Eosin Y content. Diffraction efficiency of the photopolymer films were measured using a 532 nm laser at $40^{\circ}$ incident angle. As a result, the phtopolymer film with Eosin Y content of 0.0045 g and thickness of $297{\mu}m$ showed the highest diffraction efficiency (78.70%).

• Journal of the Korean Chemical Society
• /
• v.47 no.4
• /
• pp.363-369
• /
• 2003

Selenized yeast (Se yeast) containing $0.1{\%}$(w/w) of selenium was obtained when the yeast was incubated at a selenium concentration of 1$1.14{\times}10_-3 M$ in rich medium. After washing several times, the inorganic selenium on the cell wall was confirmed with MBRT. There was no indication of inorganic selenium on the cell wall when the blue color in MBRT was stayed for 15 minutes. The selenized yeast was sonicated, then the selenium contained protein was obtained after salting out by ammonium sulfate at the concentration $80{\%}$ saturation. The seven protein bands were seperated by SDS-PAGE and the selenium concentration in protein was measured by ICP-AES. Analytical data showed that the large expressed protein band contained a relatively large amount of selenium. The proteins of the 47kDa was contained the concentrations of 69.5 ${\mu}$ Se/g of most many content. The protein (47 kDa) was seperated from PVDF membrane by tank-electroblotting. The isolated protein was hydrolyzed under acid condition and reacted with PITC. The derivatives of amino acids were analyzed by HPLC and compared with the data obtained from regular yeast. The resulting selenium-yeast was analyzed with the selenomethionine concentration of $2{\%}$ comparaed with general amino acids. The goal of this study is to analyze the selenium concentration in protein bands and measure the degree of biotransformation of selenomethionine in a specific protein.

• Electrical & Electronic Materials
• /
• v.7 no.5
• /
• pp.389-396
• /
• 1994

The bilayer film of Ag/a-S $e_{75.G}$ $e_{25}$ and the monolayer film of a-S $e_{75.G}$ $e_{25}$ act as a negative-type and a positive-type resist in focused ion beam lithography, respectively. Using a model which takes into account the ion stopping power, the ion projected range, the ion concentration implanted into resists and the ion transmission coefficient, etc., the ion resist parameters are calculated for a broad range of ion energies and implanted doses. Ion sources of A $r^{+}$, S $i^{++}$ and G $a^{+}$ are used to expose resists. As the calculated results, the energy loss per unit distance by Ga'$^{+}$ ion is about 10$^{3}$[keV/.mu.M] and nearly constant for all energy range. Especially, the projected range and struggling for 80[keV] G $a^{+}$ ion energy are 0.0425[.mu.m] and 0.020[.mu.m], , respectively and the resist thickness of a-S $e_{75}$ G $e_{25}$ to minimize the ion penetration rate into a substrate is 0.118[.mu.m].u.m]..u.m].