• Food Science and Preservation
• /
• v.9 no.4
• /
• pp.391-395
• /
• 2002

Thinned fruits, apple, pear and peach were investigated into chemical components and physiological activities. On proximate compositions, crude protein, crude fat and ash of thinned fruits were higher than those of ripe fruits, showing lower carbohydrate in thinned fruits. The contents of inorganic substance were Ca, Mg, P, Na, K and B in order. On heavy metals, As, Cd, Cr and Hg were not detected and Ge, Mo, Ni and Pb were trace. Organic acid in thinned apple and peach were detected as tartaric acid, citric acid, malic acid and succinic acid, but thinned pear did not contain citric acid. Free sugars in thinned pear and peach were composed of glucose, fructose and sucrose but sucrose was not detected in thinned apple. Contents of insoluble dietary fiber in thinned fruits were higher than soluble dietary fiber. The thinned apple extracts showed high antioxidant activity. Nitrite scavenging activity of thinned apple and pear extracts were 71∼80 e/o and 61∼63% at pH 1.2, respectively. Tyrosinase inhibitory activity of thinned pear extracts was 61.0∼89.4 ％, however peach extinct showed no activity.

• Applied Chemistry for Engineering
• /
• v.2 no.4
• /
• pp.399-410
• /
• 1991

New separation process was developed for the preparation of storage-stable liquid dyes. The extent of aggregation of dye molecules was measured with respect to storage time of liquid dyes under different salt environments. Hollow-fiber membranes were modified by immobilization of inorganic crystals onto the surface of membrane. Using surface-treated membranes, counter diffusion technology was introduced to selectively remove salts from dye solution. The separation factors were 10-700, and the loss of dye molecules was less than 0.4 %. Membrane permeabilities for sodium ions($U_{M,Na}$) and dye molecules($U_{M,Dye}$) were found to be 2.75 and $0.72l/m^2/hr$, respectively, in the case of surface-treated membranes. The effects of various operating parameters on desalting efficiency were also investigated.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.823-831
• /
• 1996

At the ratio [$H_2O$]/[TEOS]=1.7, the silica sol was synthesized by partial hydrolysis in the presence of acid catalyst. After stabilizing the silica sol by trimethylsilylation, the molecular weight and viscosity of the sol obtained at various reaction times were examined to determine a best spinnability of the sol. Gel fibers were prepared from the sol solution after removing solvent in the solution, and the gel fibers were heated at $1,000^{\circ}C$. The prepared silica fibers were in the shape of circular cross-section and their tensile strength and $SiO_2$ purity were $83{\pm}20kg/mm^2$ and about 99.997%, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.701-717
• /
• 2003

The objective of this study was to extensively estimate the air quality trends of the study area by surveying con-centration trends in months or seasons, after analyzing the mass concentration of PM-10 samples and the inorganic lements, ion, and total carbon in PM-10. Also, the study introduced to apply the PMF (Positive Matrix Factoriza-tion) model that is useful when absence of the source profile. Thus the model was thought to be suitable in Korea that often has few information about pollution sources. After obtaining results from the PMF modeling, the existing sources at the study area were qualitatively identified The PM-10 particles collected on quartz fiber filters by a PM-10 high-vol air sampler for 3 years (Mar. 1999∼Dec.2001) in Kyung Hee University. The 25 chemical species (Al, Mn, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Se, Cd, Ba, Ce, Pb, Si, N $a^{#}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, TC) were analyzed by ICP-AES, IC, and EA after executing proper pre - treatments of each sample filter. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols. the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided source profiles (scaled F matrix). So, 11 sources were qualitatively identified, such as secondary aerosol related source, soil related source, waste incineration source, field burning source, fossil fuel combustion source, industry related source, motor vehicle source, oil/coal combustion source, non-ferrous metal source, and aged sea- salt source, respectively.ively.y.

• Journal of Environmental Science International
• /
• v.24 no.7
• /
• pp.927-937
• /
• 2015

This study was performed to identify and quantify the asbestos fibers released from two types of asbestos-cement slate roofs. One is a plant roof installed in 1987 which contained 15% chrysotile, and the other is a residential roof installed before 1983 which contained 12% chrysotile. The concentrations of asbestos fibers in air surrounding asbestos-cement slate roofs and in the falling water harvested from the same roofs on rainy days ranged from 0.0012 to 0.0018 f/mL and from 1,764 f/L to 10,584 f/L, respectively. The concentration of inorganic fibers in the soil around asbestos-cement slate roofs was from 217 to 348 f/g. With the above results, the excess lifetime cancer risk (ELCR) for the risk assessment of the asbestos fibers released from asbestos-cement slate based on US EPA IRIS (Integrated risk information system) model is within 5.5E-06 ~ 6.5E-06 levels which indicates that the levels do not exceed "the acceptable risk(1.0E-05)" recommended by WHO. The asbestos concentration in air, drained rainfall and soil around the plant slate roof was higher than that around residential slate roof, but the excess lifetime cancer risk (ELCR) from residential slate was higher than that from plant slate. This suggested that the enclose and encapsulation of residential roofs have priority in removal policy to minimize the exposure risk.

• Journal of the Korean Home Economics Association
• /
• v.27 no.2
• /
• pp.75-83
• /
• 1989

In this study, effect of heat treatment on phytic acid, phosphorus compounds, and minerals in Korean soybean varieties was investigated. Results were summarized as follwo: 1. In the soybeans tested, protein content ranged from 34.6 to 44.6%, lipid content from 15.4 to 20.2%, fiber content from 4.8 to 6.1% and ash content from 4.5 to 5.9%. 2. Content range for phytic acid in soybean varieties was 1,300 to 1,542mg/100g and its mean was measured 1,392mg/100g. With increasing of the temperature, the phytic acid tends to be destroyed, especially at 6$0^{\circ}C$ the loss was averaged about 20%. 3. Total phosphorus content in soybean ranged from 607 to 681mg/100g and the decending order of phosphors content in soybean varieties was Millyang > Hwangkeum > Kwangkyo > Danyoup > Hill > Jangyoup. It was also destroyed with increasing temperature. 4. Phytate phosphorus content range in soybean was from 315.6 to 318.0mg/100g and decreased with increasing temperature. 5. Inorganic phosphorus content ranged from 95.5 to 110.0mg/100g and it was increased by temperature rising among soybean varieties. 6. Phytate phosphorus to total phosphorus ratio ranged from 5.2 to 5.7 and decreased by temperature rising. 7. The content of nonphytate phosphorus varied widely between soybean varieties and decreased with temperature increase. 8. The content of calcium, iron and magnesium ranged from 15.7 to 25.7mg/100g from 8.8 to 16.8mg/100g and from 121.9 to 143.6mg/100g respectively. The content of Mg showed small difference among soybean varieties. The change of mineral content with heat treatment in soybean did not give any meaningful change mineral content.

• Advanced Composite Materials
• /
• v.18 no.2
• /
• pp.187-195
• /
• 2009

Much attention has been paid to the processing of inorganic whisker, especially calcium carbonate whisker, which can be used as reinforcement materials of polymer composite due to its low price. Unfortunately, the present synthesis technique of calcium carbonate whisker starts from calcinations of limestone, which involves high energy consumption and furthermore is a highly environment polluting reaction. In this report, needle-like aragonite was synthesized with a reversible solution reaction from limestone without calcination. Optical microscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques were used to characterize the morphology and crystal structure of intermediates as well as that of the product, aragonite. GCC (grinding calcium carbonate) powder was dissolved in an aqueous solution of magnesium sulfate with reflux and air flush. EDTA titration was used to evaluate reaction rate of the dissolution. A kinetics equation of the dissolution reaction was constructed, which displayed second-order kinetics with respect to the concentration of magnesium sulfate. A rate constant of $0.0015\;l^{-3}{\cdot}mol^{-1}{\cdot}h^{-1}$ was obtained. The dissolution reaction gave fiber-like magnesium hydroxide sulfate and gypsum crystal. Then needle-like aragonite with a length of $9.13\;{\pm}\;1.02\;{\mu}m$ and an aspect ratio of $5.64\;{\pm}\;1.37$ was synthesized from the dissolution product with $CO_2$ bubbling at $70^{\circ}C$.

• Composites Research
• /
• v.15 no.1
• /
• pp.32-40
• /
• 2002

This study developed fabrication process of $SiC_p/Al$ metal matrix composites as electronic packaging materials by squeeze casting method. The $SiC_p$ preform were fabricated in newly designed preform mold using about 0.8 % of inorganic binder(SiO$_2$) and 5 vol.% of $Al_2O_3$fiber. To infiltrate the molten metal into the preform, fabrication condition such as the temperature and the pressure were selected. Applying the fabrication conditions, heat transfer analysis were preformed using finite element method and thus analyzed the temperature distribution and cooling characteristic during the squeeze casting. For the fabricated composites, impact toughness and thermal expansion coefficient were measured. The metal matrix composites developed in this study have 0.2~0.3 J impact toughness, $8~10 ppm/^{\circ}C$ thermal expansion coefficient and $2.9~3.0g/cm^3$density which is appropriate properties for electronic packaging application.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.225-232
• /
• 2013

Omija component was known to possess natural odor, taste, color, and various general characteristics. Omija extraction was extracted using ethanol as a solvent. Omija extract showed a red-purple color of some viscous liquid state. Some conclusions from natural Omija extract were obtained as follow. The result of antimicrobial experiment to add Omija extract, the number of microbial population showed negative reaction from 3 days after it cultivated. This phenomenon could confirm that Omija component affected to antimicrobial effect. The result of dyeing experiment to add Omija extract, fiber dyeing effect showed with some ivory color after dyed to cotton and silk. Also, this phenomenon could confirm that Omija component affected to natural dyeing effect from observated dye state with biological microscope(BM). The result of instrumental analysis, inorganic components of K(109.60ppm), Na(3.500ppm), Ca(1.205ppm), Mg(0.900ppm), Li(0.350ppm), Si(0.380ppm), Cu(0.250ppm), Fe(0.125ppm), Zn(0.090ppm), etcs from Omija were ascertained with ICP/OES, and organic components of benzene(10.808), borny lacetate(11.289), phenol(14.183), ${\beta}$-terpinene(15.840), ${\alpha}$-terpinolene(17.616) etcs from Omija were ascertained with GC/MSD.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.5
• /
• pp.380-385
• /
• 2011

Introduction: Hydroxyapatite ($Ca_{10}(PO_4)_6(OH)_2$, HA) is the main inorganic phase of human hard tissue that is used widely as the repair material for bones. When HA is applied to a bony defect, however, it can be encapsulated with fibrous tissue and float in the implanted area due to a lack of consolidation. Bioceramics as allogenic graft materials are added to HA to improve the rate and bone healing capacity. Fluoridated hydroxyapatite ($Ca_{10}(PO_4)_6(OH,F)_2$, FHA), where F- partially replaces the OH- in hydroxyapatite, is considered a good alternative material for bone repair owing to its solubility and biocompatibility. Materials and Methods: This study was designed to determine the bone healing capacity of FHA newly produced as a nanoscale fiber in the laboratory. HA and FHA with bioglass was implanted in a rabbit cranium defect and the specimen was analysed histologically. Results: 1. At 4 weeks, fibrous connective tissue and little bone formation was observed around the materials of the experimental group I implanted HA and bioglass. Newly formed bone was observed around the materials in the experimental group II implanted FHA and bioglass. 2. At 8 weeks, the amount of newly formed and matured bone was higher in experimental group II than in experimental group I and the control group. Conclusion: These results suggest that FHA and bioglass is a relatively favorable bone substitute with biocompatibility and better bone healing capacity than pure HA and bioglass.