• 생물환경조절학회지
• /
• 제28권4호
• /
• pp.447-453
• /
• 2019

블루베리는 호산성 식물로 피트모스를 활용한 상토에서 잘 자라며 관목인 점을 고려하여 용기재배를 많이 하고 있고 또한 고령화에 대비해 생력적으로 생산할 수 있는 재배기술 개발이 요구되고 있다. 본 시험에서는 블루베리 양액재배시 공급량 및 공급횟수가 수체생육과 과실품질에 미치는 영향을 알아보고자 수행하였다. 시험방법은 3년생 '듀크' 품종을 대상으로 피트모스와 펄라이트의 용량을 각각 130L, 40L(v/v)로 하여 용기($60{\times}80{\times}40cm$)에 식재하고 톱밥으로 멀칭한 후 2015년과 2016년에 양액 공급량을 4L와 8L로 나누어 4월 중순부터 7월 하순까지 1회, 2회, 3회 공급하여 수체생육 및 과실품질을 조사하였다. 양액은 $NO_3-N$ 4.6, $NH_4-N$ 3.4, $PO_4-P$ 3.3, K3, Ca 4.6, Mg $2.2mmol{\cdot}L^{-1}$를 주당 공급하였다. 채소에서 양액재배시 적정 배액율은 20~30%로 알려져 있는데 본 시험에서 평균 배액량은 4L 2회/7일 처리가 27%, 4L 3회/7일 처리가 29%로 다른 처리에 비해 적당하였다. 블루베리의 생육을 보면, 생육후반 8L/3회/7일 처리에서 신초장은 31cm, 신초경은 4.2mm로 가장 컸지만 질소를 많이 줄수록 도장하는 경향이었다. 배액의 무기성분 함량은 생육초반에 질소를 많이 흡수하는 경향이었고, 처리별 과실특성은 과립중, 가용성 고형물 함량 및 산함량 등은 처리간 유의차가 없었으며, 수량은 4L 3회/7일 처리가 주당 2.7kg으로 가장 많았고, 4L 1회/7일 처리가 1.4kg로 가장 작았다. 따라서 배액량, 수량, 수체 및 과실생육 등을 감안해볼 때 블루베리 양액재배시 조금씩 자주 공급한 처리 즉 4L 3회/7일 처리로 공급하는 것이 적당한 것으로 판단되었다.

• 헤리티지:역사와 과학
• /
• 제44권3호
• /
• pp.132-149
• /
• 2011

고대에는 단청이나 고분벽화, 사찰벽화, 불화 등 문화재에 다양한 색상을 구현하고자 무기안료 또는 유기안료를 많이 사용하였다. 이 연구는 통도사 영산전내 벽체에 그려진 사찰벽화의 안료를 휴대용X선형광분석기로 정성분석하여 사용안료의 종류를 밝히고자 하였다. 성분분석 결과와 기존 고대 벽화 안료의 분석 결과들을 종합해 볼 때, 영산전 벽화에 사용된 적색은 주사와 석간주로 추정되며, 백색은 연백이 사용되었고, 일부 호분이나 백악, 백토 등의 사용 가능성도 있다. 녹색은 2가지가 사용되었는데 주로 바탕칠에 사용된 밝은 녹색은 녹토이고, 광배부분 등의 진한녹색은 석록이나 동록, 녹염동광으로 판단된다. 황색과 흑색은 각각 황토와 먹이 사용된 것으로 보이며, 육색과 분홍 등 원색이 아닌 안료들은 적색에 백색안료를 혼합하거나, 진적색에 황색안료를 혼합하는 것과 같이 2가지 이상의 안료를 적절하게 섞어서 사용하였을 것으로 추정된다. 결론적으로 성분분석으로만 판단하였을 때 통도사 영산전에 사용된 안료는 모두 고대에 주로 이용되었던 무기 안료임을 알 수 있었다. 다만, 문화재임으로 안료의 일부를 채취하여 결정구조분석 등의 방법으로 광물을 동정한 것이 아니므로 특정 원료 광물을 명확하게 판단하기는 어려웠다.

• 한국응용과학기술학회지
• /
• 제36권1호
• /
• pp.23-33
• /
• 2019

우엉을 9번 찌고 9번 말려서 차를 제조한 다음 M사의 우엉차와 성분 및 기능성을 비교 분석하였다. 개발한 우엉차는 칼로리 346.48kcal, 탄수화물 72.75g/100g, 단백질 11.98g/100g, 회분 5.01g/100g이었다. 무기물 함량은 칼륨 1,476.21 mg/100g, 칼슘 255.96 mg/100g, 마그네슘 311.41mg/100g 이었다. 유리당 총량은 31.93 mg/100g이었고 그중 fructose 26.27mg/100g, glucose 4.39 mg/100g, sucrose 1.27 mg/100g이었다. 포화지방산은 40.73 mg/100g, 불포화지방산은 59.28 mg/100g이고 그 중 linoleic acid 41.28 mg/100g, palmitic acid 33.11 mg/100g, oleic acid 10.07 mg/100g, linolenic acid 7.92 mg/100g이었다. DPPH 라디컬 소거력은 개발한 차 33.9%, 비교용 M사 차 2.3%, 지표물질 37.2%였다. ABTS 라디컬 소거력은 개발한 차 90.7%, M사차 85.9%, 지표물질 47.6%였다. SOD 유사활성은 개발한 차 11.3%, 비교용차 50.5%였다. 플라보노이드 함량은 개발한 차2.6 fold, M사차 2.9 fold, 지표물질 1.7 fold였다. 폴리페놀 함량은 개발한 차 33.8 fold, M사차 38.9 fold, 지표물질 13.4 fold였다. 기호도는 1회 우린 것과 5회 우린 것을 비교하였다. 1회 우린 것을 기준으로 할 때 5회 우린 것의 기호도 중 색은 개발한 차 65.9%, M사차 12.8%, 향기는 개발한 차 78.0%, M사차 33.3%, 맛은 개발한 차 71.4%, M사차 20.7%, 나타났다. 이같이 비교용 M사차는 우릴수록 추출 성분이 감소하여 5회 후에 종합적인 기호도는 21.4%로 감소한 반면 개발한 차는 감소폭이 적어서 72.1%를 나타냈다. 이같이 개발한 우엉차는 비교용 M사차 및 지표물질보다 항산화 작용이 강하고 유효 물질 함량도 더 많고, 기호성도 높으므로 질병 예방 및 개선 효과가 클 것으로 생각한다.

• 광물과 암석
• /
• 제35권3호
• /
• pp.333-344
• /
• 2022

화강암 및 대리석 같은 천연 건축용 석재의 채석 및 활용이 개발도상국에서 급부상하고 있다. 이러한 석재를 사용하기 위해 가공, 절단 및 치수화 과정에서 많은 양의 폐기물이 발생한다. 석재폐기물은 개방된 환경에서 처리되며, 부산물로 발생하는 폐기물의 독성이 환경과 인간의 건강에 악영향을 줄 수 있다. 2019년 세계 석재 산업 성장은 채석장 폐기물을 제외하고 1% 이상 증가한 약 155,000천톤의 새로운 기록을 달성하였다. 인구 천명당 석재 사용량(m²/1,000 inh)은 2001년 177, 2018년 266에서 2019년 268로 증가했다. 2019년 세계 총채석량은 316,000천톤(100%)이고, 생산량의 53%는 채석장 폐기물로 발생되었다. 석재가공 단계에서는 완제품 생산량이 91,150천톤(29%)에 도달했으며 결과적으로 63,350천톤이 석재폐기물이 생산되었다. 그러므로 세계적으로 채석장에서 생산된 석재가 100%이라면 전체 폐기물 발생량은 71%이다. 석재폐기물은 환경적, 경제적 및 사회적 관점에서 상당한 문제를 발생시킨다. 석재폐기물 처리는 기본적으로 3가지 방법이 있는데 재사용, 재활용 및 매립처리가 있다. 그 중에 재사용 및 재활용은 환경 친화적으로 할 수 있는 양호한 석재폐기물 관리 방법이다. 석재폐기물은 많은 사용 방법이 있지만 건축 자재, 세라믹 재료 및 환경 적용으로 요약된다. 석재폐기물을 이용한 재료 생산은 매우 유망하며 채석장과 산업 현장에서 재생되어 사용할 수 있다. 새로운 생산품(인공토양)은 토목 공사, 철도 제방 및 원형교차로 주변 표토로 사용하며, 석분토는 산성토양의 중화를 위해 사용도 가능하다. 또한 석재폐기물은 광물 잔유물 회수, 광물 성분 추출, 건설 자재, 전력 생산, 빌딩 재료와 가스 및 수질 처리에 이용할 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제32권5호
• /
• pp.51-58
• /
• 2004

본 연구에서는 능이가 포함하고 있는 각종 생리활성 성분올 분석하고, 열수추출-에틸알코올 침전에 의하여 분리한 glycoprotein 의 특성을 구명코자 하였다. 능이(Sarcodon aspratus)의 무기성분 및 아미노산의 조성을 분석하였는 바, 능이는 Ca, Mg, Zn, Mn, Fe, Cu 및 Ph를 함유하였으며, 특히 Ca 및 Na 성분이 많이 함유되어 있었다. 유리 및 총 아미노산을 분석한 결과, 14종의 유리아미노산이 검출되었고. glutamic acid, alanine, arginine 등이 많았다. 총아미노산은 15종이었으며, glutamic acid가 가장 많았고, aspartic acid, serine, threonine 등이 그 다음이었다. 열수-95% 에틸알코올 추출에 의하여 70.6%의 당과 3.32%의 glycoprotein을 얻었으며, 에틸알코올의 농도에 따라 당의 함량이 상이한 glycoprotein을 얻을 수 있었는데, 에틸알코올의 농도가 30~70%로 낮은 경우, 당함량이 92% 이상으로 매우 높았다. 조 glycoprotein (GP). 분자량 30만 이상의 분획(P), P분획 가운데 DEAE-Sephadex에 흡착되지 않는 분획(P-1), P-1을 다시 Sepharose 2B로 젤여과하여 얻은 부분(P-2), DEAE-Sephadex에 흡착되는 부분 (P-3) 등으로 분획한 결과, 정제과정에서 total sugar의 함량은 점차 증가하였으며, 단백질의 함량은 점차 감소되는 것으로 나타났다. 단당류의 조성을 분석한 결과, GP 빛 P-3 에서 glucose, galactose, mannose, fucose 등 4종의 당이 검출 되었으며, GP에는 glucose 가 거의 대부분을 이루고 있었고, glutamic acid, serine, alanine, glycine 등이 고농도로 함유되어 있었다. P-3에는 mannose 및 aspartic acid, glutamic acid, glycine 등의 아미노산이 함유되어 있었다. P-2에서는 glucose가 많았고, 다른 fraction에는 없었던 fucose의 함량이 높았으며 mannose는 검출되지 않았다. 한편 아미노산조성은 조 glycoprotein (GP)에는 glutamic acid, serine, alanine, glycine 등이 고농도로 함유되었으며, P-3분획에서는 aspartic acid, glutamic acid, glycine 등이 함유되어 있었다. 한편 P-2 fraction의 경우는 단백질함량이 1.1%로서 매우 낮았으며, 분자량은 700,000 이상이었다. aspartic acid, glutamic acid, alanine이 비교적 다량 함유되었으며, mannose 및 cysteine은 거의 확인되지 않았다.

• 한국환경농학회지
• /
• 제26권1호
• /
• pp.42-48
• /
• 2007

본 조사는 충북지역의 양액재배 농가에서 양액재배를 위한 지하수 수질과 양액 재배 후 버려지는 폐양액의 수질에 대한 기초 자료를 얻고자 수행되었다. 양액재배를 위한 지하수의 수질 조사는 19개 지점의 양액재배농가에서 수집하여 분석하였고, 폐양액은 그중 15개 지점을 선택하여 분석하였다. 양액재배에 이용되는 지하수의 수질 분석결과 pH의 수준은 $6.2\sim7.7$이었고, 평균은 6.8이었다. EC의 분포범위는$0.10\sim0.45$ dS $m^{-1}$ 이었고, 평균은 0.23 dS $m^{-1}$ 이었다. $NO_3-N$ 농도의 분포범위는 $0.12\sim13.77$ mg $L^{-1}$, $SO_4^{2-}$의 분포범위는 $1.84\sim63.01$ mg $L^{-1}$, 그리고 $Cl^-$의 분포범위는 $10.46\sim72.09$ mg $L^{-1}$이었다. 그들의 평균값은 각각 4.00 mg $L^{-1}$, 12.70 mg $L^{-1}$ 및 27.57 mg $L^{-1}$이었다. $Ca^{2+}$, $Mg^{2+}$ 및 $Na^+$의 분포 범위는 각각 $3.24\sim36.99$ mg $L^{-1}$, $1.44\sim14.93$ mg $L^{-1}$ 및 $6.12\sim25.25$ mg $L^{-1}$이었고, 평균 농도 값은 $Ca^{2+}$ 13.06, $Mg^{2+}$ 6.02 및 $Na^+$ 12.08 mg $L^{-1}$이었다. 양액재배 후 버려지는 폐양액에서 pH 수준은 $4.3\sim8.8$ 이었고, 평균은 6.7이었다. EC의 분포범위는 $0.44\sim2.37$ dS $m^{-1}$이었고, 평균은 1.15 dS $m^{-1}$이었다. $NO_3-N$, $PO_4-P$, $K^+$, $Ca^{2+}$, $Mg^{2+}$ 및 $Na^+$ 의 분포범위는 각각 $10\sim212$, $0.56\sim26.1$, $10\sim295$, $16\sim215$, $9\sim54$ 및 $10\sim53$ mg $L^{-1}$이었다. 평균 농도 값은 $NO_3-N$ 100, $PO_4-P$ 12.15, $K^+$ 99, $Ca^{2+}$ 78, $Mg^{2+}$ 26 및 $Na^+$ 26 mg $L^{-1}$이었다. 양액 재배 후 버려지는 폐양액 중의 무기성분 함량은 양액재배에 이용되는 원수에 비해 상당히 높아졌다.

• 한국균학회소식:학술대회논문집
• /
• 한국균학회 2016년도 춘계학술대회 및 임시총회
• /
• pp.19-20
• /
• 2016

Sesquiterpenoids are defined as $C_{15}$ compounds derived from farnesyl pyrophosphate (FPP), and their complex structures are found in the tissue of many diverse plants (Degenhardt et al. 2009). FPP's long chain length and additional double bond enables its conversion to a huge range of mono-, di-, and tri-cyclic structures. A number of cyclic sesquiterpenes with alcohol, aldehyde, and ketone derivatives have key biological and medicinal properties (Fraga 1999). Fungi, such as the wood-rotting Polyporus brumalis, are excellent sources of pharmaceutically interesting natural products such as sesquiterpenoids. In this study, we investigated the biosynthesis of P. brumalis sesquiterpenoids on modified medium. Fungal suspensions of 11 white rot species were inoculated in modified medium containing $C_6H_{12}O_6$, $C_4H_{12}N_2O_6$, $KH_2PO_4$, $MgSO_4$, and $CaCl_2$ for 20 days. Cultivation was stopped by solvent extraction via separation of the mycelium. The metabolites were identified as follows: propionic acid (1), mevalonic acid lactone (2), ${\beta}$-eudesmane (3), and ${\beta}$-eudesmol (4), respectively (Figure 1). The main peaks of ${\beta}$-eudesmane and ${\beta}$-eudesmol, which were indicative of sesquiterpene structures, were consistently detected for 5, 7, 12, and 15 days These results demonstrated the existence of terpene metabolism in the mycelium of P. brumalis. Polyporus spp. are known to generate flavor components such as methyl 2,4-dihydroxy-3,6-dimethyl benzoate; 2-hydroxy-4-methoxy-6-methyl benzoic acid; 3-hydroxy-5-methyl phenol; and 3-methoxy-2,5-dimethyl phenol in submerged cultures (Hoffmann and Esser 1978). Drimanes of sesquiterpenes were reported as metabolites from P. arcularius and shown to exhibit antimicrobial activity against Gram-positive bacteria such as Staphylococcus aureus (Fleck et al. 1996). The main metabolites of P. brumalis, ${\beta}$-Eudesmol and ${\beta}$-eudesmane, were categorized as eudesmane-type sesquiterpene structures. The eudesmane skeleton could be biosynthesized from FPP-derived IPP, and approximately 1,000 structures have been identified in plants as essential oils. The biosynthesis of eudesmol from P. brumalis may thus be an important tool for the production of useful natural compounds as presumed from its identified potent bioactivity in plants. Essential oils comprising eudesmane-type sesquiterpenoids have been previously and extensively researched (Wu et al. 2006). ${\beta}$-Eudesmol is a well-known and important eudesmane alcohol with an anticholinergic effect in the vascular endothelium (Tsuneki et al. 2005). Additionally, recent studies demonstrated that ${\beta}$-eudesmol acts as a channel blocker for nicotinic acetylcholine receptors at the neuromuscular junction, and it can inhibit angiogenesis in vitro and in vivo by blocking the mitogen-activated protein kinase (MAPK) signaling pathway (Seo et al. 2011). Variation of nutrients was conducted to determine an optimum condition for the biosynthesis of sesquiterpenes by P. brumalis. Genes encoding terpene synthases, which are crucial to the terpene synthesis pathway, generally respond to environmental factors such as pH, temperature, and available nutrients (Hoffmeister and Keller 2007, Yu and Keller 2005). Calvo et al. described the effect of major nutrients, carbon and nitrogen, on the synthesis of secondary metabolites (Calvo et al. 2002). P. brumalis did not prefer to synthesize sesquiterpenes under all growth conditions. Results of differences in metabolites observed in P. brumalis grown in PDB and modified medium highlighted the potential effect inorganic sources such as $C_4H_{12}N_2O_6$, $KH_2PO_4$, $MgSO_4$, and $CaCl_2$ on sesquiterpene synthesis. ${\beta}$-eudesmol was apparent during cultivation except for when P. brumalis was grown on $MgSO_4$-free medium. These results demonstrated that $MgSO_4$ can specifically control the biosynthesis of ${\beta}$-eudesmol. Magnesium has been reported as a cofactor that binds to sesquiterpene synthase (Agger et al. 2008). Specifically, the $Mg^{2+}$ ions bind to two conserved metal-binding motifs. These metal ions complex to the substrate pyrophosphate, thereby promoting the ionization of the leaving groups of FPP and resulting in the generation of a highly reactive allylic cation. Effect of magnesium source on the sesquiterpene biosynthesis was also identified via analysis of the concentration of total carbohydrates. Our current study offered further insight that fungal sesquiterpene biosynthesis can be controlled by nutrients. To profile the metabolites of P. brumalis, the cultures were extracted based on the growth curve. Despite metabolites produced during mycelia growth, there was difficulty in detecting significant changes in metabolite production, especially those at low concentrations. These compounds may be of interest in understanding their synthetic mechanisms in P. brumalis. The synthesis of terpene compounds began during the growth phase at day 9. Sesquiterpene synthesis occurred after growth was complete. At day 9, drimenol, farnesol, and mevalonic lactone (or mevalonic acid lactone) were identified. Mevalonic acid lactone is the precursor of the mevalonic pathway, and particularly, it is a precursor for a number of biologically important lipids, including cholesterol hormones (Buckley et al. 2002). Farnesol is the precursor of sesquiterpenoids. Drimenol compounds, bi-cyclic-sesquiterpene alcohols, can be synthesized from trans-trans farnesol via cyclization and rearrangement (Polovinka et al. 1994). They have also been identified in the basidiomycota Lentinus lepideus as secondary metabolites. After 12 days in the growth phase, ${\beta}$-elemene caryophyllene, ${\delta}$-cadiene, and eudesmane were detected with ${\beta}$-eudesmol. The data showed the synthesis of sesquiterpene hydrocarbons with bi-cyclic structures. These compounds can be synthesized from FPP by cyclization. Cyclic terpenoids are synthesized through the formation of a carbon skeleton from linear precursors by terpene cyclase, which is followed by chemical modification by oxidation, reduction, methylation, etc. Sesquiterpene cyclase is a key branch-point enzyme that catalyzes the complex intermolecular cyclization of the linear prenyl diphosphate into cyclic hydrocarbons (Toyomasu et al. 2007). After 20 days in stationary phase, the oxygenated structures eudesmol, elemol, and caryophyllene oxide were detected. Thus, after growth, sesquiterpenes were identified. Per these results, we showed that terpene metabolism in wood-rotting fungi occurs in the stationary phase. We also showed that such metabolism can be controlled by magnesium supplementation in the growth medium. In conclusion, we identified P. brumalis as a wood-rotting fungus that can produce sesquiterpenes. To mechanistically understand eudesmane-type sesquiterpene biosynthesis in P. brumalis, further research into the genes regulating the dynamics of such biosynthesis is warranted.

• Applied Biological Chemistry
• /
• 제21권3호
• /
• pp.150-184
• /
• 1978

합성배지(合成培地)에서 느타리 버섯균(菌)의 균사생육(菌絲生育)과 자실체형성(子實體形成)에 대한 영양적(營養的) 특성(特性)과 생리화학적(生理化學的) 제성질(諸性質)을 구명(究明)하고 볏짚과 톱밥 양(兩) 배지(培地)에서 느타리 버섯의 대량(大量) 생산(生産)을 위한 배양조건(培養條件)을 밝히고, 느타리 버섯 재배기간(栽培期間) 중 배지(培地)와 버섯중의 각종(各種) 성분(成分)의 추이(推移)를 알고자 실험을 수행하여 다음과 같은 결과를 얻었다. 1. 탄소원(炭素源) 중 mannitol과 서은 균사생육(菌絲生育)과 자실체(子實體) 형성(形成)이 빠르고 자실체(子實體)의 수량(收量)이 많았으나 lactose와 rhamnose는 균사(菌絲) 조차도 생육하지 못하였다. 또한 구연산, 호박산, ethyl alcohol 및 glycerol에서는 자실체(子實體) 형성(形成)이 매우 빈약(貧弱)하였고, 식초산, 개미산, 푸마르산, n-butyl alcohol, iso-butyl alcohol 및 n-propyl alcohol은 균사생육(菌絲生育)을 저해(阻害)하였다. 2. 질소원(窒素源)중 peptone은 균사생육(菌絲生育)과 자실체(子實體) 형성(形成)이 빠르고 자실체(子實體)의 수량(收量)이 많았으나 DL-alanine, asparagine, L-aspartic acid, glycine및 serine은 자실체형성(子實體形成)이 매우 빈약(貧弱)하였으며 아질산태질소(亞窒酸態窒素), L-tryptophan 및 L-tyrosine은 균(菌)의 생육을 저해(沮害)하였다. 또한 peptone에 무기태질소(無機態窒素)와 아미노산(酸)을 혼용(混用)한 결과 $(NH_4)_2SO_4$, $NH_4$-tartarate, DL-alanine및 L-leucine에서는 자실체(子實體)의 수량(收量)이 약 10% 증가되었고, L-aspartic acid는 약 15%. L-arginine은 약20%, L-glutamic acid와 L-lysine은 약 25%증가 되었다. 3. C/N율(率) 15.23에서 자실체(子實體) 형성(形成)은 빠르나 자실체(子實體)의 수량(收量)은 감소(減少)되었으며, C/N율(率) 11.42에서는 자실체형성(子實體形成)은 늦으나 자실체(子實體)의 수량(收量)은 증가되는 경향이 있었다. 또한 동일 C/N율(率)에서도 mannitol과 peptone의 농도(濃度)가 높은 편이 수량(收量)이 증가되었다. 그러므로 자실체(子實體)의 수량(收量)과 자실체형성(子實體形成) 소요일(所要日)의 관점(觀點)에서 보면 C/N율(率) 30.46이 어느정도 적당(適當)한 것 같다. 4. Thiamine $50{\mu}g%,\;KH_2PO_4$ 0.2%, $MgSO_4{\cdot}7H_2O$는 $0.02{\sim}0.03%$일때 균사(菌絲)와 자실체(子實體) 생육(生育)이 우수(優秀)하였으며 미량원소(微量元素)로서는 $FeSO_4{\cdot}7H_2O$,\;ZnSO_4{\cdot}7H_2O$ 및 $MnSO_4{\cdot}5H_2O$가 공존(共存)하면 생육촉진(生育促進)의 상승효과(相乘效果)가 인정되었으나 3이원소(元素)중 Mn이 결핍(缺乏)하면 균사(菌絲)와 자실체(子實體)의 생육(生育)이 다소 저하되었다. 이들 염류(鹽類)의 최적농도(最適濃度)는 각각 0.02mg%이었다. 5. Cytosine $0.2{\sim}1mg%$와 indole acetic acid 0.01mg%에서 균사량(菌絲量)은 증가되었으나 자실체(子實體)의 수량(收量)에는 효과 없었으며 그밖의 purine염기(鹽基), pyrimidine염기(鹽基) 및 식물(植物) hormone은 영향이 없었다. 6. 광조사(光照射영)에 의해서 균사생육(菌絲生育)은 저해(沮害)되었으며 영양생장(營養生長)의 후기에 광(光)을 조사(照射)하면 원기형성(原基形成)이 유도(誘導)되었다. 광(光)의 최적조도(最適照度)는 $100{\sim}500lux$, 조사시간(照射時間)은 매일 $6{\sim}12$시간이었고, 이 이상(以上)의 조도(照度)에서는 오히려 저해(沮害)되었으며, 암소(暗所)에서는 원기(原基)가 형성(形成)되지 않고 영양생장(營養生長)만 계속되었다. 7. 균사생육(菌絲生育)과 자실체(子實體) 형성(形成)의 최적온도(最適溫度)는 각각 $25^{\circ}C,\;10{\sim}15^{\circ}C$이었고 최적(最適)의 pH범위(範圍)는 $5.0{\sim}6.5$이었으며 균사(菌絲)는 $7{s\im}10$일간 배양(培養)했을 때가 자실체(子實體) 형성(形成)이 제일 우수(優秀)하였다. 또한 배지량(培地量)이 적을수록 자실체(子實體) 형성(形成)은 빠르나 자실체(子實體)의 수량(收量)은 감소(減少)되었고 배지량(培地量)이 많을수록 자실체(子實體) 형성(形成)은 늦은반면에 그 수량(收量)은 증가 되었으며, 원기형성(原基形成)은 $CO_2$에 의하여 저해(沮害)되었다. 8. 볏짚과 톱밥 병 배지(培地)에서 균사생육(菌絲生育)의 최적(最適) 수분량(水分量)은 70%이상 이었으며 미강(米糠) 10%를 배지(培地)에 첨가(添加)했을 때는 균사생육(菌絲生育)과 자실체형성(子實體形成)이 우수(優秀)하였다. 그리고 양배지(兩培地)에 $CaCo_3$를 단독(單獨)으로 첨가했을 때는 유효(有？)하였으나 미강(米糠)과 함께 첨가했을때는 효과(？果)를 볼 수 없었다. 9. 재배(栽培) 실험(實驗)에서 느타리 버섯의 전체(全體) 수량(收量)은 볏짚배지(培地)에서 $14.99kg/m^2$, 톱밥배지(培地)에서 $6.52kg/m^2$이었고 양배지(兩培地) 모두 90%이상이 1,2주기(週期)에서 얻어졌으며 볏짚배지(培地)(dry matter $20.96kg/m^2$)의 전수율(全收率)을 톱밥배지(培地)(dry matter $20.83kg/m^2$)의 약 2.3배(倍)이었다. 10. 재배기간(栽培期間)중 양(兩) 배지(培地)의 일반 성분을 고형물(固形物) 기준(基準)으로 볼때 회분(灰分)의 변화는 적었으나 유기물(有機物)은 감소(減少)되었으며, 수분(水分)은 종균접종시(種菌接種時) 약 79%이던것이 균사번식기간(菌絲繁殖期間)중에 다소 감소(減少)되었고 그 이후부터는 큰 변화가 없었다. 11, 종균접종시(種菌接種時) 부터 4주기(週期) 수확(收穫) 후까지 배지(培地) 성분(成分)의 소실(消失)을 보면 볏짚배지(培地)는 고형물(固形物) 약 19.7%, 유기물(有機物) 약 19.3%, 질소(窒素) 약 40%가 소실(消失)되었으며, 톱밥 배지(培地)에서는 고형물(固形物) 약 7.5%, 유기물(有機物) 약 7.6%, 질소(窒素) 약 20%가 소실(消失)되었다. 버섯 1kg을 생산(生産)하기 위하여 볏짚 배지(培地)에서는 유기물(有機物) 약 232g, 질소(窒素) 약 7.0g이 소실(消失)되었고, 톱밥 배지(培地)에서는 유기물(有機物) 약 235g, 질소(窒素) 약 6.8g이 소실(消失)되었으며, 버섯 1kg당(當) 함유된 유기물(有機物)은 각각 82.4g, 82.3g, 질소(窒素)는 각각 5.6g, 5.4g이었다. 12. 양배지(兩培地)의 전질소(全窒素)는 점차적으로 감소(減少)되었고 불용성질소(不溶性窒素)의 절대감소량(絶對減少量)은 수용성질소(水溶性窒素)보다 컸으며 아미노태(態) 질소(窒素)는 3주기(週期)까지는 계속 증가 되었으나 그 이후부터는 감소(減少)되었다. 13. 볏짚 배지(培地)에서는 재배기간(栽培其間)에 소실(消失)된 전(全) pentosan의 28%, ${\alpha}$-cellulose는 13.8%가 균사생육(菌絲生育)중에 소실(消失)되었고 톱밥배지(培地)에서는 전(全) pentosan의 24.1%, ${\alpha}$-cellulose는 11.9%가 소실(消失)되었으며 lignin은 양(兩) 배지(培地)의 2주기(週期) 수확(收穫)부터 다소 감소(減少)되었다. 환원당(還元糖), trehalose 및 mannitol은 계속 증가의 추세를 보였으며 C/N율(率)은 볏짚 배지(培地)에서 종균(種菌) 접종시(接種時) 33.2이었던 것이 폐상시(廢床時)에는 30.3이었고, 톱밥 배지(培地)는 61.3이었던 것이 60.0 이었다. 14. 양(兩) 배지(培地)에서 P, K, Mn, Zn은 감소(減少)되었고, Mg, Ca, Cu는 불규칙하게 변화되었으며, Fe는 증가되는 경향이었다. 15. 재배기간(栽培期間)중 각종효소(各種酵素)의 활성(活性)은 톱밥배지(培地)보다 볏짚배지(培地)가 월등히 높았다. 즉 CMC 당화활성(糖化活性)과 CMC액화활성(液化活性)은 균사번식(菌絲繁殖)후부터 2주기수확(週期收穫)까지는 양배지(兩培地)에서 점차적으로 증가 되었으나 그 이후부터는 감소(減少)되었다. xylanase활성(活性)은 1주기(週期)보다 2주기(週期)에서 급격히 상승되었고 3주기(週期)가 되면서 볏짚 배지(培地)에서는 신속히 감소(減少)되었으나 톱밥 배지(培地)에서는 이와같은 감소(減少)를 볼 수 없었다. protease 활성(活性)은 균사번식(菌絲繁殖)후 최고의 활성도(活性度)를 보였다가 점차로 감소(減少)하였다. 또한 볏짚 배지(培地)의 pH는 종균접종시(種菌接種時) 6.3이던 것이 4주기(週期)후는 5.0이었고 톱밥배지(培地)의 pH는 5.7에서 4.9로 떨어졌다. 16. 볏짚 배지(培地)에서 생육한 버섯은 섬유소(纖維素)를 제외한 모든 성분량(成分量)이 톱밥배지(培地)에서 생육한 버섯보다 높은 경향이있었으며 양배지(兩培地)에서 버섯의 각주기별(各週期別) 성분(成分) 변화는 $1{\sim}3$주기(週期)까지는 거의 비슷하였으나 4주기(週期)에서는 다소 감소(減少)의 추세를 보였다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.