• 한국균학회지
• /
• 제16권4호
• /
• pp.242-246
• /
• 1988

To determine contents of inorganic elements of Laccaria, the carpophores of Laccaria laccata(Fr.) Berk. et Br., Laccaria amethystina(Fr.) Berk. et Br., Laccaria tortilis(S.P. Gray) Cooke and Laccaria vinaceoavellanea Hongo were incinerated and analyzed by atomic absorption spectrophotometer. Total contents of determined inorganic elements(except Cd) were highst in Laccaria tortilis than the other three mushrooms, and Laccaria vinaceoavellanea, Laccaria laccata and Laccaria amethystina in that order. The four species mushrooms contained potassium, iron, zinc, sodium, copper, manganese, and calsium in that order, and the content of potassium was the highst than the other inorganic components. The content of cadmium was Laccaria tortilis, Laccaria laccata, Laccaria vinaceoavellanea and Laccaria amethystina in that order.

• 한국식품영양학회지
• /
• 제32권5호
• /
• pp.401-407
• /
• 2019

This study compares and analyzes inorganic components of four different Pu-erh tea species consumed in Korea. The criteria for the inorganic components was based on the Royal Institute of Technology (KTH) recommendations. Out of the 19 general items: potassium, manganese, silicon and fluorine were detected in amounts exceeding the maximum allowable concentration by 5~23, 57~91, 1.6~1.8 and 9~18 times respectively. Out of the 15 potentially harmful elements: aluminum and nickel were exceeded the Maximum allowable concentration by 9~14 times and 0.8~1.2 times respectively. To reduce the concentration of inorganic elements in excess of the maximum allowable concentration, the extraction time of tea should be less than 1 minute in addition to limiting the amount. The amount of Pu-erh tea for extraction was about 0.1 g manganese, about 0.3 g potassium, about 0.5 g fluoride and about 2 g silicon. Therefore, the maximum amount of tea for extraction should be 0.1 g in regards to the safety of Pu-erh tea. Based on the recommended maximum daily intake of inorganic ingredients by the Ministry of Food and Drug Safety, it is desirable that the number of extractions be less than three.

• 한국농공학회지
• /
• 제45권6호
• /
• pp.144-152
• /
• 2003

Laboratory experiments were carried out to investigate the influence of pore water contamination on the treatment effect of sandy soil which was solidified by Portland cement. In the experiments, setting time of hydraulic cement that was mixed with contaminated mixing water was measured using Vicat equipment and observed the tendency of setting process with the kind of contaminants, organic or inorganic components. It was shown that organic contaminants of the mixing water affect largely on the initial setting process of hydraulic cement and inorganics, expecially heavy metals, did not affect on the initial setting process, otherwise it was appeared that setting time of the sandy soil that was contaminated with inorganic components was apparently faster than the sandy soil that did not include inorganic components even though organic concentrations was relatively low level (COD=200∼300) in the mixing water. The results of unconfined compression strength test (UCST) were well consistent with the results of Vicat equipment test.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.617-619
• /
• 2008

Inorganic-organic hybrid multilayers were formed on the plastic substrate to enhance the barrier properties of substrate to water vapor and oxygen transport. Plasma pretreatment of substrate with $Ar/O_2$ lead to adhesion improvement and the densification of inorganic layer on the substrates. Combination of $SiO_xN_y$ layer and silanenanoclay composite layer offered quite good barrier properties (WVTR and OTR) to PES substrate.

• BioChip Journal
• /
• 제12권4호
• /
• pp.268-279
• /
• 2018

Flower-shaped organic-inorganic hybrid nanostructures, termed nanoflowers, have received considerable recent attention as they possess greatly enhanced activity, stability, durability, and even selectivity of entrapped organic biomolecules, which are much better than those from the conventional methods. They can be synthesized simply via co-incubation of organic and inorganic components in aqueous buffer at room temperature and yield hierarchical nanostructures with large surface-to-volume ratios, allowing for low-cost production by easy scale-up, as well as the high loading capacity of biomolecules without severe mass transfer limitations. Since a pioneering study reported on hybrid nanoflowers prepared with protein and copper sulfate, many other organic and inorganic components, which endow nanoflowers with diverse functionalities, have been employed. Thanks to these features, they have been applied in a diverse range of areas, including biosensors and biocatalysis. To highlight the progress of research on organic-inorganic hybrid nanoflowers, this review discusses their synthetic methods and mechanisms, structural and biological characteristics, as well as recent representative applications. Current challenges and future directions toward the design and development of multi-functional nanoflowers for their widespread utilization in biotechnology are also discussed.

• Membrane and Water Treatment
• /
• 제7권4호
• /
• pp.341-353
• /
• 2016

Papermaking reconstituted tobacco is an important strategy for recycling the waste tobacco residues. To indentify the influences of the inorganic components on harmful components delivery in cigarette smoke, a self-made electrodialysis stack was assembled to desalt the tobacco extract. The influences of the applied current and extract content on the removal rate of the inorganic ions were investigated. Results indicated that the applied current was a dominant impact on the desalination performance. High currents lower than the limiting current density could accelerate the desalting efficiency but cause higher energy consumption. A current of 2 A, or current density of ${\sim}11mA{\cdot}cm^{-2}$, was an optimal choice by considering both the energy consumption and desalting efficiency. A 20% tobacco extract was an appropriate content for the electrodialysis process. More than 90% of inorganic ions could be removed under the optimum condition. The preliminary result indicated that removal of inorganic components was beneficial to decrease the harmful component delivery in cigarette smoke. Naturally, ED is an environmentally friendly and high-effective technology for desalting the tobacco extract.

• 디지털융복합연구
• /
• 제11권10호
• /
• pp.493-505
• /
• 2013

홍삼추출물이 혈액생화학성분, 대퇴골의 골밀도 및 골무기질 등에 미치는 영향을 알아보기 위하여 난소절제(OVX) 흰쥐에 홍삼추출물을 투여하였으며, 실험결과는 일원변량분산분석과 Scheffe의 사후검정을 통하여 분석하였다. 그 결과 홍삼추출물은 OVX군에 비하여 혈중 알부민, HDL Ca, P, Mg 및 estradiol, 골밀도, 대퇴골의 회분, Ca 및 P을 유의하게 증가시키고, 혈중 ALP, AST, ALT, 혈당, 총콜레스테롤, 중성지질, LDL, creatinine, osteocalcin 및 N-terminal telopeptide를 유의하게 감소시켰다(p < 0.01). 이상의 결과로부터 홍삼추출물은 난소절제로 저하된 간과 신장의 기능, 혈중 당, 지질 및 무기질, 골밀도, 골무기질 함량 및 골다공증관련 대사지표들을 정상수준으로 회복시켜 준다는 것을 알 수 있었다.

• Applied Biological Chemistry
• /
• 제39권1호
• /
• pp.67-69
• /
• 1996

채취시기(採取時期)에 따른 수세미오이(Luffa cylindrica L.) 수액(樹液)의 몇가지 물리적 특성(特性)과 무기성분 함량(含量)을 조사하였다. 온실(溫室)(green house)과 노지(露地)(open culturing)에서 재배한 수세미오이의 줄기로 부터 수액(樹液)을 시기별로 채취(採取)하여 분석(分析)한 결과 명도(L), 적도(a), 황색도(b), pH 및 탁도는 시료간에 별 차이가 없었다. pH는 전체적으로 약알칼리성을 나타내었고 재배기간이 경과함에 따라 약간씩 감소(減少)하는 경향(傾向)이었다. 무기성분은 총 8개 항목을 조사한 결과(結果) K, Ca, Mg이 주요성분(主要成分)이었으며, Na, Zn, Fe는 미량(微量)함유되어 있었다. Cu는 노지재배에서는 검출(檢出)되지 않았으며 Mn은 모든 시료에서 검출되지 않았다.

• ALGAE
• /
• 제20권3호
• /
• pp.239-249
• /
• 2005

Some marine coenocytic green algae could form protoplasts from the extruded protoplasm in seawater. The dissociated cell components of the coenocytic protoplasm could be reunited into live cells and, hence, the formation of new species by mixing protoplasms from different coenocytic cells has been predicted. Our results showed that an incompatibility barrier was present during protoplast formation in coenocytic algae to exclude foreign inorganic particles or alien cell components. No inorganic particles or alien cell components were incorporated into protoplast formed spontaneously in seawater. Even when the inorganic particles or alien cell and/or cell component were incorporated into protoplast in some experimental condition, they were expelled from the protoplast or degenerated within several days. A species-specific cytotoxicity was observed during protoplast hybridization between the protoplasms of Bryopsis spp. and Microdictyon umbilicatum. The cell sap of M. umbilicatum could destroy the cell components of Bryopsis spp., but had no effect on Chaetomorpha moniligera. Species C. moniligera and Bryopsis did not affect protoplast generation of either species. The wound-induced protoplast formation in vitro might have evolved in some coenocytic algae as a dispersal method, and the incompatibility barrier to alien particles or cell and/or cell component could serve as a protective mechanism for successful propagation.

• 폴리머
• /
• 제36권5호
• /
• pp.622-627
• /
• 2012

친환경 수성 코팅제의 물성 강화 및 VOCs의 저감 특성을 연구하기 위해서 poly(tetramethylene glycol) 2000, polycarbonate diol 2000, isophorone diisocyanate, dimethylolpropionic acid, 그리고 titanium dioxide를 사용하여 유/무기 하이브리드 수분산 폴리우레탄 코팅제를 제조하였다. R ratio([NCO]/[OH])에 따른 코팅제의 필름 물성 및 무기물의 적용으로 인한 VOCs의 저감 특성에 대해서 연구한 결과 R ratio가 1.5 이상인 경우에서 코팅제로 적합함을 확인하였으며 이는 하드 세그먼트의 영향으로 여겨지며 $TiO_2$의 적용으로 코팅 후 VOCs의 저감 특성을 확인하였다.