• Journal of Technology Innovation
• /
• v.26 no.2
• /
• pp.69-93
• /
• 2018

As companies seek lower cost and superior quality at the same time, which depend on improvement in product architecture, they need to critically consider product architecture as part of corporate strategy. This research investigated how product architecture and organizational capability affect innovative outcomes with using architecture framework. As a result, we were able to find out Korean shipbuilding company has put much effort on integral works such as development of FGSS(Fuel gas supply system), PRS(Partial Re-liquefaction System) and weight lightening for improving fuel efficiency. And this kind of integral ability was realized by organizational capability of Korean shipbuilding company based on interactive relationship with plant workers. In contrast, Chinese shipbuilding companies focused excessively on the standard design and the convenience of research and development made by central government, overlooking the need for fine-tuning. As a result, the fuel efficiency of Chinese LNG ships turned out to be 7-10% lower than those of South Korea with using the same modules and components.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.78-86
• /
• 2017

The new businesses started by the companies usually results in being unsuccessful. The main reasons for that are either aiming targeting wrong customers, unsatisfaction of customers' requesting quality standards, or taking wrong actions against the competitors in the market. Therefore, companies should aim the targets for the newly developing products based on the fulfilling values for the customers when they start the new businesses, and should take good cares for risk managements at the each step of the new business to prevent the failure in advance. In addition to that, the companies starting new businesses not only need to take the customers attributes (CA) into account, but they also should apply the new technologies as one system to initiate a new business to satisfy the basic wants of the customers. This article suggests the New Product Development Pursuing Model using the Indicative Planning methodology and the Quality Management tools. The New Product Development Pursuing Model would be completed by the following steps as below; 1. Drawing the CTQ (Critical To Quality) for setting up the new product development objectives by : i) using the VOC (Voice Of Customers) obtained by the QFD (Quality Function Deploypment) if the market is mature, ii) applying AHP (Analytic Hierarchy Process) to information in the QIS (Quality Information System) if the market is unmature to get enough need information of the customers. 2. Risk Management in NPD : The NPD pursuing model consisted of the IP (indicative planning) is suggested not by the process of top-down-way mandatory planning process, but by the tools used in the administrative science and economic fields, namely by governance. The companies could apply innovative methodology for new products development processes to fulfil the customers satisfaction in the fields, through the CA (Contingency Approach) of the NPD (New Product Development) process.

• Journal of Plant Biotechnology
• /
• v.35 no.1
• /
• pp.5-12
• /
• 2008

The transgenic technologies and their product (living modified organisms) have been developed and commercialized enough to get much attention in terms of their potentials to solve the current global difficulties such as shortage of food and energy. Furthermore, they are expected to make a big role in improving human health levels and creating bio-economy as innovative tools to pursue environmentally sound economic development. However, for the technologies and products to be developed and used in such a way that they continuously give a good impact to human society, first and foremost safety issues surrounding them should be dealt with. Every stage from in-house R&D, pilot field application to on the shelves should be managed to ensure safety following them because many consumers tend to have fear before they get the right or needed information on the modern biotechnology. In this sense, managing research facilities and LMOs for R&D from the point of safety is very crucial in that they are in the early stage of technology or product development. This paper especially deals with those to be complied with by researchers according to the Act on transboundary movement of LMOs, etc, entered into the effect from Jan. 1 2008.

• Fisheries and Aquatic Sciences
• /
• v.23 no.9
• /
• pp.25.1-25.9
• /
• 2020

Fish is an extremely perishable food product which requires proper handling soon after harvest. The present study was aimed at assessing post-harvest fish losses and preservation practices in Siavonga district, Southern Zambia. Structured and semi-structured questionnaires were used to collect data on post-harvest fish losses and preservation practices from aquaculture producers, artisanal, and commercial fishers. All the fishers who landed on the lakeshore were interviewed, while aquaculture producers were randomly selected based on the information provided by the local department of fisheries. The results of the study revealed that all the fishers experienced post-harvest fish losses at varying degrees with those losing up to 10% of the total catch being in the majority. In contrast, aquaculture producers did not report any post-harvest fish losses. Most aquaculture producers commonly used chilling as preservation practice contrary to artisanal and commercial fishers who commonly used smoking and sun sun-drying respectively. Furthermore, fish product safety and quality control were poorly practiced in the district. Lack of cold storage facilities and fluctuating weather conditions were the major challenges impacting fish post-harvest activities. Therefore, to curb the loss of revenue due to post-harvest fish losses, we propose the introduction of new technology, self-development skills for fishing communities, and enhanced access to refrigeration facilities.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.19-29
• /
• 2006

Drying is the least developed of all unit operations of paper and board manufacture. While groundbreaking developments were Introduced during the several past decades in forming, pressing and calendering, no radical changes occurred in drying. The cylinder-drying technology is now more than 200 years old and, while it was subject to many incremental improvements, many of its inherent problems persist. We believe that conventional drying is now approaching the end of its life and the industry is ready for a major breakthrough in drying. Indeed several innovative technologies already exist at various stages of development or commercialization. In general, the novel drying technologies are striving to increase the drying rate, improve the product quality and boost the energy efficiency of drying. A novel, drying method, $Papridry^{TM}$, which combines conductive and convective heat transfer to obtain very high drying rates, is at an advanced stage of development at Paprican. The results obtained when drying printing paper ana board on a self-standing pilot $Papridry^{TM}$ machine and on the pilot paper machine equipped with a tandem of two $Papridry^{TM}$ units demonstrate both, the high drying rate and improved product quality achieved by using this drying method. A mathematical model of this operation has been developed and the software compiled with this model was used to calculate the effect of installing a $Papridry^{TM}$ unit into an existing dryer section. The model also allows to calculate the z-direction distribution of moisture and temperature at various points of the dryer section.

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.209-221
• /
• 2019

Cooperating with a supplier with professional skills is necessary to achieve performance in the development of the innovative products. It is also important to improve development competence and share knowledge. This study empirically analyzed the effect of participant's Job Competence and Leadership Competence on Knowledge Sharing, and the effect of Purchaser Interdependence on Supplier Absorption Capacity. The purpose of the study is to confirm that Knowledge Sharing between Development Participant and Supplier contributes to Performance and to demonstrate the need for a cooperative relationship with the Supplier. A survey was conducted on the product development participants to confirm the relationship between the factors using a Structural Equation Model. As a result of the hypothesis test, the better the Individual Competence of the development participants, the better the Knowledge Sharing Activity, and then Knowledge Sharing and Interdependence are the main factor in the Absorption Capacity of the Supplier. The results of this study can contribute to improving the Supplier Absorption Capacity in the product development projects in which high technology is converged. In the future, we will study the effects of the project support activities of related departments for Performance.

• Agribusiness and Information Management
• /
• v.11 no.2
• /
• pp.5-15
• /
• 2019

The world of smart agribusiness is still far from being fully and effectively applied by the Italian entrepreneurial fabric. In part, this is due to the fact that its potential and important connections with the technological world of reference are not fully known. The imperative is therefore: to learn how to manage all the processes that characterize the agricultural chain in a synergistic way, from production to the sale of the product to the final consumer. It is therefore essential to know every minimum aspect of the supply chain considering the current strengths on which to leverage but especially the weaknesses on which to intervene thanks to the use of technology available on the market. Today, the supply chain is still considered as a set of phases, one consecutive to the other, as if they were detached from each other. However, in order to operate efficiently, each step should be interconnected: from the farmer's decision to produce an agricultural good to the choice of production factors, from the implementation of harvesting and post-harvest operations to processing, from the selection of goods suitable for sale to the logic of distribution on the target territory. This work investigates the potential strategy using digital technologies in order to make dynamic the agribusiness supply chain, especially because in Italy the agri-food is one of the most important economic sectors but it is far from the most innovative trends available on the market.

• The Research Journal of the Costume Culture
• /
• v.22 no.3
• /
• pp.383-398
• /
• 2014

This research worked on the cooperative case by Marc Jacobs, who was involved in innovative collaboration in the field of fashion, and the analysis on imbedded values. With assessment of it, this paper aims at providing the theoretical ground on prevalence of fashion collaboration for creative innovation and presenting the basic material in establishing the design and marketing in the fashion industry. In methodology, the review was followed up about literature regarding Marc Jacobs and collaboration and his cases in 2001 through 2012. Results showed that his collaboration cases could be divided into those with modern artist, those with fashion brand or designer, those with other field brand than fashion, and those with the public star. They were processed into such a form as development of new product and collection, shop display, and exhibition event. The value could be drawn from this case examination of Marc Jacobs' fashion collaboration, which includes the design innovation through reinterpretation of tradition, innovation of maximized brand value, and transboundary innovation toward a vast extension of realm. Namely, the collaboration of Marc Jacobs would be the driving force for design innovation and the creative process for both parties concerned through endless cooperation and would generate the innovative value for fashion field.

• Annual Conference of KIPS
• /
• 2012.04a
• /
• pp.961-963
• /
• 2012

The sound source localization system is used to some area such as robotic system, object localization system, guarding system and medicine. So time delay estimation and angle estimation of sound direction are studied until now. These days time delay estimation is described in LabVIEW which is used to create innovative computer-based product and deploy measurement and control systems. In this paper, the development of signal monitoring platform is presented for sound source localization. This platform is designed in virtual instrument program and implemented in two stages. In first stage, data acquisition system is proposed and designed to analyze time delay estimation using cross correlation. In second stage, data obtaining system which is applied and designed to monitor analog signal processing is proposed.

• The Korean Journal of Franchise Management
• /
• v.2 no.1
• /
• pp.61-73
• /
• 2011

Supermarket Franchising, as a relatively new mode of retail business, is often regarded as one of the two hallmarks of the "Modern Logistics Revolution". After more than ten years of development, franchise supermarkets have been a rising force in retail business in China. As a product of a highly-developed commercial economy, franchise supermarkets mainly deals in foodstuffs and other daily necessities, featuring low cost, high turnover rate, low prices and diversified inventory. Propelled by the conveniences that come with open shelves and self-service shopping, franchise supermarkets have been growing very rapidly and the rise of many franchise supermarket brands bears testimony to its growth potential and profitability. Meanwhile, in the backdrop of this boom, some franchise supermarkets are going bankrupt. This paper analyzes the current status of franchise supermarkets and some factors bearing on their core competencies, so as to close the competitiveness gap with international retail giants.