• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.3
• /
• pp.99-112
• /
• 2018

This research focuses on the university-business incubation from the prospective of triple helix and summarizes complementary researches and develop plans for university-business incubation. To pursue these objectives, we analyzed the studies of triple helix on domestic as well as overseas university-business incubators and their collaboration. The findings of this study showed that firstly In order to innovate the business incubator of the university, it is necessary to secure sufficient competence for the capability. For this purpose, Research and policy implications from various perspectives must be preceded.. Second, the collaborative relationship of business incubations should lead to organic and dynamic cooperative relations instead of static cooperative partnerships. Furthermore, based on the internal innovation that runs the business incubation program together with bottom-up rather than top-down approach, it is necessary to plan incubation and lead the transformation through creative ideas. Third, for the dynamic collaboration of business incubation, the management and practice of the organization should be given priority so that the boundary spanning appropriate to each situation, which turn increase the absorption capacity. As a future direction, studies are expected to explore the development of innovative university-business incubation about boundary spanning and knowledge transformation.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.611-620
• /
• 2007

The beam-column connection is the critical design section of general steel frame structures owing to the behavioral characteristics of the structural system. As most members of a frame structure are composed of rolled section beams, the cross-section of the beam members is governed by the negative bending moment near beam-column connections. Such a design concept leaves a redundant load-carrying capacity at the positive bending regions of the beam members leading to design inefficiency. Therefore, it is of utmost importance to redistribute the beam end moments and reduce the stresses at the beam-column connections for a more efficient design of steel frame structures. In this study, reaction-moment prestressing method (RMPM) was proposed for the innovative design and construction of steel frame structures. The RMPM is a prestressing method utilizing the elastic bending deformation of a beam member induced by temporary prestressing for the distribution of a relatively large bending moment to other sections for the efficient use of the beam section. By the application of the RMPM, the negative bending moment at the beam-column connections can be significantly reduced, ultimately leading to possible use of smaller beam sections. Through a series of model tests and numerical analyses of steel frame structures, the moment distributing effect and feasibility of the RMPM was verified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3688-3699
• /
• 2010

The purpose of this study is to understand attributes, stress and burnout related to job environment of healthcare facilities workers for the aged, care-givers, analyze the effect of these factors on job satisfaction, and improve their organizational task to help advance the quality of life and the healthcare facilities for the aged. A survey was made on 129 care-givers working in the healthcare facilities for the aged(care facilities, in-home facilities for the aged) located in Jeonbuk Gunsan area. This study showed that sub-factors of care-givers' job environment such as human environment, compensation system and job expertise have a significant effect on the job burnout, stress and satisfaction. This means that a well-organized compensation system, which is proportionate to the job expertise and ability for human environment, and achievement of innovative thinking, will make a positive relationship, reduce the job burnout and stress, and improve the job satisfaction at the same time. Compared to the rapid increase of old aged patients for long-term care and care-givers' real role and job in the facilities, the job specialization has to be guaranteed to improve job environment of care-givers as various beneficial workers for welfare - professional workers - and the compensation system needs to be properly systematized according to their job capacity. Consequently, the production and participation of professionals with high self-esteem may raise organizational commitment through the maximization of job satisfaction by the participation and devotion to the organization of more professionals by removing factors, which can reduce the frequent job burn-out and stress of care-givers.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1621-1625
• /
• 2015

Power quality has always been a concern of power engineers. Certainly an argument can be successfully made that most parts of power engineering have the ultimate objective to improve power quality. AC motors were widely used in industrial and domestic applications. Generally, AC motors were of two types: Induction and Synchronous motors. In motor many parameters like different load cycling, switching, working in hot weather and unbalances creates harmonics which creates major reasons for temperature rise of the motors. Due to high peak value of voltage, harmonics can weaken insulation in cables, windings and capacitors and different electronic components. Higher value of harmonics increase the motor current and decrease the power factor which will reduce the life time of the motor and increase the overall rating of all electrical equipments. Harmonics reduction of all the motors in India will save more power. Coating of windings of the motor with nano fillers will reduce the amount of harmonics in the motor. Based on the previous project works, actions were taken to use the enamel filled with various nano fillers for the coating of the windings of the different AC motors. Ball mill method was used to convert the micro particles of Al₂O₃, SiO₂, TiO₂, ZrO₂ and ZnO into nano particles. SEM, TEM and XRD were used to augment the particle size of the powder. The synthesized nano powders were mixed with the enamel by using ultrasonic vibrator. Then the enamel mixed with the nano fillers was coated to the windings of the several AC motors. Harmonics were measured in terms of various indices like THD, VHD, CHD and DIN by using Harmonic analyzer. There are many other measures and indices to describe power quality, but none is applicable in all cases and in many instances, these indices may hide more than they show. Sometimes power quality indices were used as a basis of comparison and standardization. The efficiency of the motors was increased by 5 – 10 %. The thermal withstanding capacity of the motor was increased by 5º to 15º C. The harmonics of the motors were reduced by 10 – 50%.

• Development and Reproduction
• /
• v.8 no.1
• /
• pp.35-42
• /
• 2004

Oocyte maturation refers to the process that prophase I arrested germinal vesicle(GV) drives the progression of meiosis to metaphase II(MII) to have the capacity for fertilization and embryo development. To better understand the molecular mechanism(s) involved in oocyte maturation, we identified differentially expressed genes(DEGs) between GV and MII mouse oocytes using a new innovative annealing control primer (ACP) technology. Using 20 ACPs, we successfully cloned 32 DEGs between GV and Mll oocytes, and 26 out of these 32 DEGs were functionally known genes. Four genes including Pscd2 were GV-specific, 10 genes including PKD2 and CSN3 were highly expressed in GV oocytes(GV-selective), and 12 genes including Diva were highly expressed in MII oocytes (MII-selective). Ail of the genes identified in this study were first reported in the oocyte expression using ACP system and especially, we could characterize the existence of PKD-CSW signaling pathwayin the mouse oocytes. Results of the present study would provide insight for studying molecular mechanisms regulating oocyte maturation.

• Earthquakes and Structures
• /
• v.12 no.6
• /
• pp.603-617
• /
• 2017

This paper presents investigation into the behavior of beam-column joints, with the joint region concrete being replaced by steel fiber reinforced concrete (SFRC) and by ultra-high performance concrete (UHPC). A total of ten beam-column joint specimens (BCJ) were tested experimentally to failure under monotonic and cyclic loading, with the beam section being subjected to flexural loading and the column to combined flexural and axial loading. The joint region essentially transferred shear and axial stresses as received from the column. Steel fiber reinforced concrete (SFRC) and ultra-high performance concrete (UHPC) were used as an innovative construction and/or strengthening scheme for some of the BCJ specimens. The reinforced concrete specimens were reinforced with longitudinal steel rebar, 18 mm, and some specimens were reinforced with an additional two ties in the joint region. The results showed that using SFRC and UHPC as a replacement concrete for the BCJ improved the joint shear strength and the load carrying capacity of the hybrid specimens. The mode of failure was also converted from a non-desirable joint shear failure to a preferred beam flexural failure. The effect of the ties in the SFRC and UHPC joint regions could not be observed due to the beam flexural failure. Several models were used in estimating the joint shear strength for different BCJ specimens. The results showed that the existing models yielded wide-ranging values. A new concept to take into account the influence of column axial load on the shear strength of beam-column joints is also presented, which demonstrates that the recommended values for concrete tensile strength for determination of joint shear strength need to be amended for joints subject to moderate to high axial loads. Furthermore, finite element model (FEM) simulation to predict the behaviour of the hybrid BCJ specimens was also carried out in an ABAQUS environment. The result of the FEM modelling showed good agreement with experimental results.

• Journal of the Korean Geographical Society
• /
• v.45 no.1
• /
• pp.49-74
• /
• 2010

Cities are major sources of greenhouse gas emissions but also suitable places for implementing proactive climate mitigation and adaptation strategies. Based on the interdisciplinary review of literature, we categorize the current discussion about urban climate mitigation and adaptation planning, policy and practices into four perspectives - sustainability science, global change science, multilevel governance, and structural engineering. While these four schools of thought have distinct perspectives rooted in different disciplinary lenses, our synthesis of the literature identifies several universal themes that are common to all of the perspectives in the context of combating threats posed by climate change. The Portland case study illustrates that a city can make changes to reduce greenhouse gas emissions and increase adaptive capacity to climate change impacts by implementing smart growth, devising local climate action plans that target emission reductions in various sectors, recognizing the interactions and influences of multiple scales of governance, and supporting the installation of various green infrastructures that contribute to green economy. Furthermore, a university can serve as a hub in this climate mitigation and adaptation arena by connecting various levels of community organizations in both public and private sectors, creating innovative research centers and spatially explicit green infrastructure, designing impact assessments and campus carbon inventories, and engaging students and the larger community through service learning.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.3
• /
• pp.143-149
• /
• 2012

With the increasing use of mobile phones, mobile game is emerging as an entertainment for move. Furthermore, smart phone is widely spread, so mobile game market is rapidly growing. According to "Republic of Korea 2010 Games White Paper" mobile game market is growing annual average 10% or more, and is expected to reach $ 9.8 billion in 2011. It is almost doubled compared to 2007. It became possible to realize complicated high-capacity game with mobile phone developed to smart phone. And at the same time, mobile game is associated with Social Network Services (SNS) and is worldwide growing as a part of 'mobile life'. Apple launched an application open market, App Store, in 2008, and mobile game industry welcomed an innovative turning point. Global smart phone application market (App Store) is opened, so Gameday is able to launch mobile games easily to the global market getting out of the domestic market. In addition, Apple App Store has the structure of sharing their revenue with the developer with 7 to 3 which is more favorable terms for the developer compared to supply mobile contents to the mobile carrier who monopolized the market in the past. The largest proportion of the current App Store application is game, and Gameday has the opportunity to make a significant leap forward by keeping pace with the new environment changes.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.5
• /
• pp.1106-1115
• /
• 2020

Research was conducted on the production of bio-methane for city gas, from food waste digestion gas using two membrane-separation methods(4SBR and 3SDR) in a commercial plant. A purity of 98.9% can be obtained using either method. The recovery rate of methane from the digestion gas was 88.1% for 4SBR and 79.4% for 3SDR. the ratios of bio-methane production to treated digestion gas were 53.5% for 4SBR and 49.4% for 3SDR. However, the 4SBR method had a higher ratio of returned gas(56.5%), approximately twice that of 3SDR, making 3SDR the more desirable method in terms of maximum treat capacity. Therefore, 4SBR seems more economical when the digestion gas to be treated is less than 200 N㎥/day, while 3SDR is more suited to treat gas volumes of more than 240 N㎥/day. The relative deviation of each operation index, compared to mean values, was generally greater for the 4SBR method. Additionally, the correlation coefficients between major system indexes, such as bio-methane production and bio-methane draw out pressure(which is the main control measure of membrane facility) showed that these indexes are more closely related in the 3SDR method.

• Korean Security Journal
• /
• no.39
• /
• pp.355-386
• /
• 2014

Current business environment asks the fundamental changes about business security. The essences of these changes are that the security management of today's global business is important task of managers and the security practitioner is professional who needs very specialized education and training with business thinking. Rapid process of globalization of global village tore down the business limit that was restricted on the geological areas' limitation. Rapid business environments' change that is driving depends on development of science and technology with globalization needs new paradigm to keep business continuity. With the process of globalization, Korea, which importance is gradually increasing in the national economy, has trade dependent economic system, which keeps power of national economy through trade, so Korean economic tendency is accelerating. To keep competitiveness in global market, new strategy that is different with existing domestic business management is necessary. That is, capacity of coping with outside risk in domestic business management is established in some degree, but business activities in foreign countries faces at numerous unexpected risks that differ from country to country such as difference with the custom, changes of corporate governance etc. To cope with these new risks effectively, new paradigm for business risk is necessary. Especially, flexibility of thinking like new paradigm is necessary to cope with new security risk effectively. To cope with security risk that occurs in the new business environment effectively and competes against international company in global market, company management and members' changes of cognition about security and innovative changes in security policy is necessary. In the basement of these changes, there is expansion of business security tasks, improvement of report line, enhancement of professionalism and status of security officers, variation of hands-on workers and increasing of investment to the security etc.