• Food Science and Biotechnology
• /
• v.16 no.1
• /
• pp.23-28
• /
• 2007

A linear correlation was found by stepwise multiple regression analysis between the sensory score of barley bran sauce aroma and the absolute gas chromatogram (GC) data transformed with square root. In spite of highly significant relationship between the quantity of the peak and the sensory score, it is difficult to estimate the aroma quality of barley bran sauce samples on the basis of only one peak. Peak 29 (methyl 9,12,15-octadecatrienoate) contributed most to the aroma of barley bran sauce. This was followed by 27 (methyl 9,12-octadecadienoate), 28 (ethyl 9,12-octadecadienoate), 12 (phenyl acetaldehyde), and 9 (methyl furfural) in terms of absolute value. When it was calculated using absolute value transformed by square root, peak 28 (ethyl 9,12-octadecadienoate) made the highest contribution to the aroma of barley bran sauce of among the peaks. It was followed by 31 (9,12-octadecadienoic acid), 27 (methyl 9,12-octadecadienoate), 12 (phenyl acetaldehyde), and 29 (methyl 9,12,15-octadecatrienoate).

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.4
• /
• pp.256-271
• /
• 2022

Activated carbon (AC) derived from coconut shells (CS-AC) was obtained through pyrolysis at 700℃ and subsequently activated with H₃PO₄. AC was ground in a Wiley mill several times to form powder particles at particle scales of 80, 100, and 200 meshes. The characterization of the AC was studied using scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Fourier-transform infrared spectroscopy (FT-IR), and surface area analysis (S_BET). The CS-AC-200 mesh resulted in a higher percentage of mesopores and surface area. This particle size had a larger surface area with angular, irregular, and crushed shapes in the SEM view. The smaller particles had smoother surfaces, less wear, and increased curing depth and ratio of the hardness of the resin composite. Based on the characterization results of the AC, it is evident that CS-AC with a 200 mesh particle size has the potential to be used as a filler in biocomposites.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.2
• /
• pp.81-97
• /
• 2023

The aim of this study were to evaluate tannin resorcinol formaldehyde (TRF) for the preparation of cross-laminated timbers (CLTs) made from fast-growing tree species and to analyze the physical and mechanical properties of CLTs. TRF copolymer resin was prepared by using the bark extracts of Swietenia mahagoni (L.) Jacq. It was observed that the TRF adhesive possessed less solid content (23.59%), high viscosity (11.35 poise), and high pH values (10.0) compared to the standard phenol resorcinol formaldehyde. The TRF adhesive was applied to produce CLTs with the addition of 15% tapioca and flour as an extender. The six-layered CLTs were produced from sengon (Falcataria moluccana Miq.), jabon [Anthocephalus cadamba (Roxb) Miq.], coconut (Cocos nucifera L.), and the combination of coconut-jabon and coconut-sengon wood. The analysis of variance revealed that the layer composition of CLT significantly affected the physical and mechanical properties of the beam. While the modulus of rupture met the standard, the moisture content and modulus of elasticity values did not fulfill JAS 1152-2007. All of the CLTs produced in this study demonstrated low formaldehyde emission, ranging from 0.001 mg/L to 0.003 mg/L, thereby satisfying the JAS 1152 for structural glue laminated timber.

• Nuclear Engineering and Technology
• /
• v.55 no.5
• /
• pp.1775-1782
• /
• 2023

Several reactor physics commissioning experiments were conducted to obtain the neutronic parameters at the beginning of the G.A. Siwabessy Multi-purpose Reactor (RSG-GAS) operation. These parameters are essential for the reactor to safety operate. Leveraging the experimental data, this study evaluated the calculated core reactivity, control rod reactivity worth, integral control rod reactivity curve, and fuel reactivity. Calculations were carried out with Serpent 2 code using the latest neutron cross-section data ENDF/B-VIII.0. The criticality calculations were carried out for the RSG-GAS first core up to the third core configuration, which has been done experimentally during these commissioning periods. The excess reactivity for the second and third cores showed a difference of 510.97 pcm and 253.23 pcm to the experiment data. The calculated integral reactivity of the control rod has an error of less than 1.0% compared to the experimental data. The calculated fuel reactivity value is consistent with the measured data, with a maximum error of 2.12%. Therefore, it can be concluded that the RSG-GAS reactor core model is in good agreement to reproduce excess reactivity, control rod worth, and fuel element reactivity.

• Journal of information and communication convergence engineering
• /
• v.21 no.3
• /
• pp.252-260
• /
• 2023

A bullet launcher can be developed as a smart instrument, especially for use in the military section, that can track, identify, detect, mark, lock, and shoot a target by implementing an image-processing system. In this research, the application of object recognition system, laser encoding as a unique marker, 2-dimensional movement, and pneumatic as a shooter has been studied intensively. The results showed that object recognition system could detect various colors, patterns, sizes, and laser blinking. Measuring the average error value of the object distance by using the camera is ±4, ±5, and ±6% for circle, square and triangle form respectively. Meanwhile, the average accuracy of shots on objects is 95.24% and 85.71% in indoor and outdoor conditions respectively. Here, the average prototype response time is 1.11 s. Moreover, the highest accuracy rate of shooting results at 50 cm was obtained 98.32%.

• Korean Journal of Materials Research
• /
• v.34 no.5
• /
• pp.247-253
• /
• 2024

The separation of zirconium and hafnium using tributyl phosphate (TBP)-Dodecane extractants in nitric acid medium was performed. Zirconium oxychloride, used as extraction feed, was obtained from the synthesis of Kalimantan zircon sand concentrate smelted using NaOH. The extraction process was carried out by dissolving chloride-based metals in nitric acid media in the presence of sodium nitrate using TBP-Dodecane as an extractant. Some of the extraction parameters carried out in this study include variations in organic phase and aqueous phase (O/A), variations in contact time, and variations in nitric acid concentration. Extraction was carried out using a mechanical shaker according to the parameter conditions. X-ray fluorescence (XRF) was used for elemental (Zr and Hf) composition analysis of the aqueous solution. The results showed that zirconium was separated from hafnium at optimum conditions with an organic/aqueous ratio of 1:5, contact time of 75 min, and an HNO₃ concentration of 7 M. The resulting separation factor of zirconium and hafnium using TBP-Dodecane was 14.4887.

• Fisheries and Aquatic Sciences
• /
• v.27 no.1
• /
• pp.48-55
• /
• 2024

The study assessed the utility of mitochondrial DNA for identifying a deceased rorqual discovered off the western coast of India. Both the COI and Cytb genes exhibited remarkable 99-100% similarity with the GenBank sequence of Balaenoptera musculus through a global BLAST search, confirming their affiliation with this species. Inter-species genetic distances for COI and Cytb genes ranged from 6.75% to 9.80% and 7.37% to 10.96% respectively, compared with other Balaenopteridae species. The Bayesian phylogenies constructed based on both COI and Cytb genes demonstrated clear and separate clustering for all Balaenopteridae species, further reaffirming their distinctiveness, while concurrently revealing a cohesive clustering pattern of the generated sequences within the B. musculus clade. Beyond species confirmation, this study provides valuable insights into the presence of live and deceased B. musculus individuals within Indian marine ecosystems. This information holds significant potential for guiding conservation efforts aimed at safeguarding Important Marine Mammal Areas (IMMAs) in India over the long term.

• SUVANNABHUMI
• /
• v.16 no.1
• /
• pp.229-269
• /
• 2024

This research aims to comprehend the progress of Halal tourism in specific Indonesian regions, including Aceh, West Sumatra, Riau, and Riau Islands. It investigates ways to boost this progress through collaboration within the IMT-GT. Majority of the population in these areas, as in Malaysia and Southern Thailand, is Muslim. Consequently, developing Halal Tourism within the IMT-GT framework poses a challenge for them. While the IMT-GT framework already encompasses the Tourism and Halal Product sectors, it doesn't explicitly mention Halal Tourism aspect. Despite this, efforts to develop Halal Tourism in Indonesia offer opportunities for both domestic growth and taking advantage of proximity to two more advanced neighboring countries, Malaysia and Thailand, in this aspect. This research employs explanatory analysis, examining Indonesia's opportunities and approaches to developing the Halal Tourism sector, both domestically, designed by the Halal Tourism Development Strategic Plan 2021-2024, and within the IMT-GT framework itself. A new aspect of this study involves assessing the readiness within Indonesia and its correlation with the opportunities provided by the IMT-GT. Indonesia should actively embrace opportunities presented by its two neighboring countries. The recognition through various awards that Indonesia has received can strongly motivate efforts to enhance the preparedness of regions designated for Halal Tourism. The economic corridors established by the IMT-GT among these three countries can serve as a conduit for Indonesia's advancement in developing Halal Tourism.

• SUVANNABHUMI
• /
• v.16 no.1
• /
• pp.175-203
• /
• 2024

With the enactment of international free trade and economic agreements and cooperation, BIMP-EAGA is an opportunity to accelerate development and economic growth in eastern Indonesia. This subregional cooperation could be used to reduce the development gap or inequality between the western and eastern regions, which are geographically, demographically, and economically different. This cooperation also may accelerate development in the border area. This study analyzes Indonesia's policies related to connectivity in BIMP-EAGA subregional cooperation and its implementation. The study results show that the National Secretariat of Sub-Regional Economic Cooperation has encouraged cooperation clusters ranging from natural resources, transportation, infrastructure, ICT, and tourism to MSMEs. In terms of connectivity, Indonesia is also involved in the development program of three economic corridors, namely West Borneo, East Borneo, and Sulu-Sulawesi. Indonesia's involvement in the three corridors has boosted the connectivity of Indonesia's territory, especially border areas, with neighboring countries. Connectivity has covered not only physical but also institutional and people-to-people dimensions. However, there are still several challenges, ranging from the standardization of the Customs, Immigration, and Quarantine (CIQ) mechanisms, improvement of institutional quality, and consistent strong political will among the involved parties. In addition, considering the vulnerability of the BIMP subregion to transnational crimes and acts of radical terrorism, BIMP-EAGA needs to think about solutions to overcome these cross-border security problems so that the momentum of development in the subregion may be sustained.

• Corrosion Science and Technology
• /
• v.23 no.1
• /
• pp.11-19
• /
• 2024

A Fe-Ni Bainitic steel as a weathering steel application was developed by combining its excellent mechanical properties and corrosion resistance in maritime environments. Nickel concentration (0.4-3 wt%) and inverted austempering multi-step (IAM) process were primary determinants of the microstructure of the Fe-Ni Bainitic steel. The initial austempering steel was performed at 300 ℃ for 600 seconds to obtain a partly bainitic transformation. The steel was heated again for 1800 s at 450 ℃. The microstructure was comprised of ferrite, a blocky martensite/austenite island, and a homogeneous lath-shape bainite structure with widths ranging from 4.67 to 6.89 ㎛. The maximum strength, 1480 MPa, was obtained with 3 wt% nickel. In this study, corrosion behavior was investigated utilizing potentiodynamic and electrochemical impedance spectroscopy (EIS) tests. A higher nickel content in Fe-Ni Bainitic steel refined the grain size, improved the bainite fraction, lowered the corrosion rate to 0.0257 mmpy, and increased the charge transfer of film resistance to 1369 Ω.