• Tribology and Lubricants
• /
• 제24권6호
• /
• pp.315-319
• /
• 2008

This paper presents the interface bonding characteristics between a phosphor bronze and a steel plate for pin-bush bearings. The pin-bush bearing is an important component in which is used to reduce a friction loss and a wear against the piston pin. The pin-bush bearing is manufactured by hot-pressing a phosphor bronze and a back metal of a steel plate. This paper investigated the bonding interface characteristics in which is manufactured by melting a copper based bronze and a steel plate. The hardness from the inner surface of a bronze to the outer one of steel has been measured using a Vickers hardness tester. The experimental results show that the hardness of a bronze is superior to that of the conventional bronze and the transient hardness of pin-bush bearings is gradually increasing to the hardness of the steel back metal. This means that the bonding interface zone of pin-bush bearings may be fabricated by defusing a bronze to the steel plate due to a density difference between two materials.

• 복식문화연구
• /
• 제19권5호
• /
• pp.970-980
• /
• 2011

As a type of intimate architecture, fashion has always mediated the dialogue between clothes and the body, or fashion and figure. This study seeks to inquire the current aesthetic consciousness of the body and dress in Japanese avant-garde fashion and intends to research the features and meanings in the pastiche of Western sartorial convention in Japanese avant-garde fashion in order to examine the changing aesthetic attitude in postmodern fashion. The study investigates subjects of the fashion collections of the turn of the twenty-first century, when pastiche strategies frequently appeared in Japanese avant-garde fashion, through the methodology of literature research and case analysis. The results of the study are as follows: by developing the strategy of pastiche, Japanese avant-garde fashion exposes the defectiveness of the Western idea of the idealized and standardized body for mass productions, thus freeing design from its traditional confinement to the human body. Drawing on the re-conceptualization of the sartorial convention of Western tradition, Japanese avant-garde fashion designers tend to experiment with extreme exaggeration in form, refusing to subscribe to the traditional Western values built on the balance and symmetry of the body. Through the combination of the past and the present as well as the inner-wear as outerwear strategy, the historical pastiche challenges convention and symbolism, which results in the discord between signifiant and signifi$\acute{e}$ of clothing.

• 한국주조공학회지
• /
• 제25권6호
• /
• pp.233-239
• /
• 2005

Contact material is widely used in the field of electrical parts. Ag-CdO has a good wear resistance and stable contact resistance. We studied a lifetime of Ag-CdO material because of getting better properties of Ag-CdO using Post-oxidation. The experimental procedure were melting using high frequency induction, heat treatment, rolling and internal oxidation. And we experimented on difference process, Post-oxidaion. Then we tested a lifetime and analysed. We obtained the optimizing oxidation temperature was $750^{\circ}C$. Using Pre-oxidation, coarse oxide and depleted oxidation layer existed but finer oxides were existed and depleted oxidation layer was not using Post-oxidation. In Post-oxidation, The density was 10 $g/cm^{3}$, the hardness was Hv 80 and the adhesive strength was 9000N. The specimen of Post-oxidation had better lifetime properties than that of Pre-oxidation. We predicted that the lifetime of Post-oxidation specimen is more longer twice than that of Pre-oxidation one.

• 패션비즈니스
• /
• 제18권3호
• /
• pp.91-103
• /
• 2014

Shirts which have been a inner-wear in men's suit in the past, are being changed into an item that 20's men utilize to their individuality. Dress shirts have gotten out of its shape, becoming tight and slim with activity and fashion trend. In this study, two patterns of fitted dress shirts in a clothing construction text book were compared with the pattern of an apparel company with regard to the size tolerance and appearance silhouette; this comparison was performed through a fitting test and an appearance evaluation. According to the study, size tolerance of chest girth and waist girth were about 6~8cm and 10~18cm, respectively. Neck girth of the collar was tight in both the fitting test and appearance evaluation. Thus, the measurement value of the neck base girth had to be used for the collar pattern making. Moreover, approximately 35cm is a moderate size for the width on the upper arm in sleeve. Therefor the factors such as size tolerance of waist girth, height of sleeve cap, slim sleeve width and measurement value of neck base girth are being considered for the pattern making of fitted dress shirts.

• Tribology and Lubricants
• /
• 제37권6호
• /
• pp.203-207
• /
• 2021

This study presents the development of dielectric constant sensors to measure lubricant properties. The lubricant oil sensor is used to measure oil properties and machine conditions. Various condition monitoring methods are applied to diagnose machine conditions. Machine condition monitoring using oil sensors has advantage over other machine condition monitoring methods. The fault conditions can be noticed at the early stages by the detection of wear particles using oil sensors. Therefore, it provides an early warning in the failure procedure. A variety of oil sensors are applied to check the machine condition. Among all oil sensors, only one sensor can measure the tendency of several properties such as acidity and water content. A dielectric constant sensor is also used to measure various oil properties; therefore, it is very useful. The dielectric constant is the ratio of the capacitance of a capacitor using that material as a dielectric to that of a similar capacitor using vacuum as its dielectric. The dielectric constant has an effect on water content, contaminants, base oil, additive, and so forth. In this study, the dielectric constant sensor is fabricated using MEMS process. In the fabrication process, the shape, gap of the electrode array, and thickness of the insulation material are considered to improve the sensitivity of the sensor.

• 한국생활과학회지
• /
• 제19권1호
• /
• pp.149-156
• /
• 2010

TV news anchor woman's appearance, voice, expression, and clothing, etc., have an influence on the reliability of the article to be reported. Among these, clothing is the most crucial factor in forming an anchor woman's image, especially the clothing color factor. This study is aimed at providing the basic foundation for anchor woman when they select the clothing color by analyzing the clothing color image on the screen. For this purpose, the KBS and MBC 9 o'clock news desk and SBS 8 o'clock news of the local major news programs were selected. With the collection of 300 pieces of news clips related to anchor woman's clothing from January to December 2008, they were classified into F/W seasons and analyzed by the clothing color. The surveying method of clothing color was to capture the anchor woman's clothing among the news clips, then pick the representing color by applying Adobe Photoshop, and researching the formed $L^*a^*b^*$ value of color chips. The surveyed color was transformed into value of distant cell, H V/C, and the results were analyzed. As a result, it showed that the White system for anchor woman's clothing during the S/S seasons is most frequently picked, followed by the Red system. In F/W seasons, Gray system is the most favored, then White and Red, respectively. It was revealed that the most frequently selected colors for upper-wear by anchor women in the three broadcasting stations was an achromatic color, such as White or Gray, and then the chromatic color, Red. It shows that there is no big difference in season. The Inner-wear color matched the jackets which were also achromatic in color, white and black being the most favored in the S/S seasons, and in the case of chromatic colors, Red was the most favored. In addition to this, identical coloration with jacket, coloration with similar color, or single color as clothing color were no less frequently adopted. During the F/W seasons, identical coloration accounts for 26%, the most popular colored being White and Red. It was found that the coloration with achromatic colors are highly favored in the three major broadcasting stations alike.

• 복식문화연구
• /
• 제6권3호
• /
• pp.56-72
• /
• 1998

Vest is a general term for a sleeveless upper garment and it derives from a kolobus of a sleeveless tunic style that was started to be worn as a substitution of a chiton by the peasantry in Greek period. The kolobus started to be called a colobium or a tunica from Roman period and the former was named for a vest style tunica which was worn by the people of the lower classes in early Roman period. Similarly, a German colobium of North Europe which was worn during the same period was the same kind of clothe as the Roman colobium. The colobium came to be worn over a dalmatica as an outer garment by early Christians when it was the Middle Ages, who succeeded the tradition of colobium as they went through ancient Rome, Creek and Byzantine days. North Germans also succeeded the colobium tradition of ancient Germans as it was and so continued to wear it in tight style. The simple vest style of colobium was getting vanished from the mid of the Middle Agnes and a new style of vest named jupon was started to be worn by soldiers. The jupon was to protect soldiers' bodies from either were cold weather or enemies wearing under armors as it was made with double cotton pad by quilt. From 14th century, the jupon began to be worn by not only soldiers but also the humble of lower classes. All the jupon which were made in quilting and padding of that time began to be named a pourpoint by the humble. When Renaissance in 16th century came, the pourpoint began to be developed to an exaggerating body-line style. The neckline of pourpoint was getting highly influenced by Spain and a peacecod-belly of it emphasized the exaggerated masculine beauty of Renaissance by padding in round. The sleeves were puffed out and the whole purpoint was made to expose an inner chemise by slashing vertically or obliquely. But in 17th century, the pourpoint has been changed into more simple style without padding, puffing out and slashing influenced by the citizens' clothes of Netherlands. The pourpoint came to be more comfortable bulky style with short sleeves or sleeveless and straight side lines. The pourpoint in mid 17th century turned to be a bolero jacket style by gradually being tightened. It had been then changed into a vest style with sleeves and worn under an overcoat with the name of vest in the end of 17th century. The early vest was 2∼3 inches les in length than the overcoat and had long sleeves and many ornamental buttons on front. It was also made as a home wear to be worn it alone at home. In 18th century, the length of the vest became shorter compared with that of 17th century and the most important decorative item in clothes. It again came to have complete sleeveless vest style and had very short length reaching waist in the end of 18th century. When it was in 19th century, the vest had developed into more various style and colors and style had been applied to be worn by individuals with their tastes. Around the end of 19th century, the increasing tendency to be casual by industrialization influenced on clothes in all aspects of life and so the male vest has been gradually changed into more casual style. Nowadays, it has been developing into various uses in modern male clothes to show their characters.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.337-341
• /
• 2004

Engineering ceramics have superior heat resistance, corrosion resistance, and wear resistance. Consequently, these art significant candidates for hot-section structural components of heat engine and the inner containment of nuclear fusion reactor. Besides, some of them have the ability to heal cracks and great benefit can be anticipated with great benefit the structural engineering field. Especially, law fracture toughness of ceramics supplement with self-healing ability. In the present study, we have been noticed some practically important points for the healing behavior of silicon nitride, alumina, mullite with SiC particle and whisker. The presence of silicon carbide (SiC) in ceramic compound is very important for crack-healing behavior. However, self-healing of SiC has not been investigated well in detail yet. In this study, commercial SiC was selected as sample, which can be anticipated in the excellent crack healing ability. The specimens were produced three-point bending specimen with a critical semi-circular crack of which size that is about $50-700{\mu}m$. Three-point bending test and static fatigue test were performed cracked and healed SiC specimens. A monotonic bending load was applied to cracked specimens by three-point loading at different temperature. The purpose of this paper is to report Strength Properties and Elastic Waves Characteristics of Silicon Carbide with Crack Healing Ability.

• 디지털융복합연구
• /
• 제10권3호
• /
• pp.71-78
• /
• 2012

본 연구는 모브랜드로부터 상당한 거리가 있는 제품범주로의 브랜드 확장(비유사 브랜드확장)에 영향을 미치는 모브랜드의 컨셉과 사고방식의 주효과는 물론, 이들 변수간의 상호작용효과인 조절효과를 살펴보고자 하였다. 이를 위하여 속옷브랜드인 캘빈클라인(상징적 컨셉)과 보디가드(기능적 컨셉)를 모브랜드로 선정하였으며 확장제품으로는 지갑을 선정하였다. 연구결과 1) 기능적 브랜드컨셉보다 상징적 브랜드컨셉에서 브랜드 확장의 적합성 판단 및 평가가 높게 나타났으며, 2) 종합적 사고자들이 분석적 사고자들보다 브랜드 확장의 적합성을 높게 판단하고 호의적으로 평가하였다. 뿐만 아니라 3) 상징적 브랜드에서는 사고방식에 따른 적합성 판단 및 평가가 큰 차이를 보이지 않았지만 기능적 브랜드에서는 상대적으로 큰 차이를 보여 변수들 간의 상호작용 효과를 살펴볼 수 있었다. 이러한 연구 결과는 글로벌 시장 환경 하에서 기존의 브랜드컨셉을 고려한 다양하고도 실질적인 마케팅전략을 수행하는데 상당한 기여를 할 것이다.

• 한국의류학회지
• /
• 제26권6호
• /
• pp.811-820
• /
• 2002

The physical responses and subjective sensations of different cleanroom garments were compared in order to discover which cleanroom garment design could minimize pollution of the working environment by dust from the worker, maintain a pleasant microclimate and provide effective thermoregulation. A. Coverall with non-detachable hood, kimono sleeves (front), raglan sleeves (back), raschell net on the bodice B. Coverall with detachable hood, kimono sleeves (front), raglan sleeves (back), raschell net on the bodice C. Separate top with non-detachable hood, kimono sleeves (front), raglan sleeves (back), raschell net on the bodice D. Coverall with non-detachable hood, set-in sleeves, raschell net on the bodice E. Coverall with non-detachable hood, raglan sleeves (back), l00% cotton inner wear (upper body) The results of the experiment were as follows. Because the hood covered the shoulder and the chest areas, the chests temperature of the worker wearing garment E was quite higher than those wearing other garment designs. For fabric that has been coated in order to prevent dust, layered designs should be avoided in order to prevent skin temperature from rising. Compared with layers of underwear, it would be more effective to attach a see-through raschell net which clings to the body. Thermal sensations were also highest in garment E, reinforcing the finding that layered designs should be avoided. Through the experiment, it was found that a new material coverall with a non-detachable hood was effective in minimizing dust, suppressing skin temperature increases, maintaining a superior microclimate and providing pleasant subjective sensations.