• Journal of the Korea Safety Management & Science
• /
• v.10 no.1
• /
• pp.107-116
• /
• 2008

Nowadays, BSC presented by alpan is observed by many enterprises and is being operated gradually. BSC includes non-financial factor as well as financial factor in performance assessment and it is a tool that will be able to evaluate even strategy of long-term view. In point of performance management, BSC brings in relief importance on non-financial performance as well as financial performance and it shares with viewpoint of 4 things of financial viewpoint, customer viewpoint, internal process view point, learning and growth viewpoint. then these make an array with vision and strategy of organization by causal relationship, it presented necessity of performance control on organization as center on KPI of inner of each viewpoint. Thus, study on measures and control of management performance is progressed actively and is accomplishing much development. This study is aimed at calculation of weight that is able to reflect its importance about AHP on KPI of each viewpoint. The purpose of this study is to present desirable performance measurement model and to give a weight in consideration of working-level character.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1314-1321
• /
• 1992

In analyzing the plastic flow of axisymmetric tube extrusion a new method of formulation using the stream function approach and upper-bound theorem is proposed which permits the prediction of plastically deformed zone in analytic expression as well as metal flow. It is shown that the formulation proposed in this work covers the solid extrusion and tube extrusion in axisymmetric case. The effect of some process parameters such as area reduction, the ratio of radii(inner radius to outer radius) and friction factor on extrusion pressure, deformation zone and plastic flow through stream-lined dies has been studied. The presented theoretical analysis can be effectively used for the prediction of deformation zone and plastic flow.

• Journal of the Korean housing association
• /
• v.15 no.4
• /
• pp.55-63
• /
• 2004

The aims of this research are to find the difference of space origination between Korean-Chinese and Chinese multi-family housing unit plan and to find the main reason to make this difference. To do this research, twenty three different kinds of floor plans were surveyed and examined. The results are as follows; 1. The Chinese-Korean floor plan and Chinese floor plan in Ondol heating system are totally different, although in radiator and floor panel heating system are similar. The inner space origination between two races are different. That is to say, Chinese-Korean likes open space origination and Chinese likes closed space origination. 2. The main reasons to make differences seem to be living style, heating system, constructional method and the trade with South Korea. In the future time, the usage of floor panel heating system will be increased and various kinds of floor plan should be introduced.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.183-187
• /
• 2002

This study researched that the remodeling was executed desirably in the side of deweller's household to the subject of ten apartment housings located in Gwang-ju, Jun-nam province. The study method was used the field study method and used in parallel with participant observation. As a result of the study, first, the problems of remodeling enforcement process are brought about standardized design, bad construction and the difficulty of solution in the defect occurrence. Second, By that request of the household is not reflected, the room except bedroom and the bathroom of inner room are low practical use degree. And wash space, garden space, assistant space of kitchen work were becoming hindrance factor of the residing environment because the use is irrational.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.3
• /
• pp.85-89
• /
• 2018

Temperature uniformity of a wafer in a semiconductor process is a very important factor that determines the overall yield. Therefore, it is very important to confirm the temperature characteristics of the chuck surface on which the wafer is lifted. The temperature characteristics of the chuck depend on the external heat source, the shape of the cooling channel inside the chuck, the material on the chuck surface, and so on. In this study, CFD confirms the change of temperature characteristics according to the stacking order of ceramic materials and inner coolant path on the chuck surface. Finally this study suggests the best cooling condition of electrostatic chuck.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.699-702
• /
• 2001

The increasing demand in industry to produce rectangular cans at the reduction by the rectangular backward extrusion process involves better understanding of this process. In 2-D die deflection and dimensional variation of the component during extrusion, punch retraction, component injection and cooling was conducted using a coupled thermal-mechanical approach for the forward extrusion of aluminum alloy and low-carbon steel in tools of steel. Backward extrusion FE simulation and experimental simulation by physical modeling using wax as a model material have been performed. These simulations gave good results concerning the prediction of th flow modes and the corresponding surface expansions of the material occuring at the contact surface between the can and the punch. There prediction are the limits of the can height, depending on the reduction, the punch geometry, the workpiece material and the friction factor, in order to avoid the risk of damage caused by sticking of the workpiece material to the punch face. The influence of these different parameter on the distribution of the surface expansion along the inner can wall and bottom is already determined. This paper deals with the influence of the geometry changes of the forming tool and the work material in the rectangular backward using the 3-D finite element method.

• Journal of Power System Engineering
• /
• v.9 no.3
• /
• pp.71-78
• /
• 2005

A high-pressure hose includes rebar layers of the synthetic fiber such as nylon or a steel wire to control internal pressure. The hose assembly is manufactured through the swaging process to clamp the hose into the metal fittings. Usually, the hose behavior is affected by the resultant of the longitudinal and circumferential forces produced by the internal pressure. The rebar layers can appear the most ideal rebar effect when they are arranged to the same direction as the resultant force. The braid angle applied in the rebar layers is an important factor in determining ultimate burst pressure and overall hose life. Failure can occur on the contacted parts of a hose with the metal fittings under severe operating conditions such as high pressure and temperature of the inner fluid. In this paper, the mechanical behavior between the hose and the metal fittings during the swaging process and the stress variation characteristics of a high-pressure hose under a constant applied pressure are analyzed with respect to the braid angle of steel wire using the finite element method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.6
• /
• pp.82-91
• /
• 2021

We compared the heat transfer characteristics of the parallel and the counterflow flow in the concentric double tube of the Al₂O₃/water nanofluids using numerical methods. The high- and low-temperature fluids flow through the inner circular tube and the annular tube, respectively. The heat transfer characteristics according to the flow direction were compared by changing the volume flow rate and the volume concentration of the nanoparticles. The results showed that the heat transfer rate and overall heat transfer coefficient improved compared to those of basic fluid with increasing the volume and flow rate of nanoparticles. When the inflow rate was small, the heat transfer performance of the counterflow was about 22% better than the parallel flow. As the inflow rate was increased, the parallel flow and the counterflow had similar heat transfer rates. In addition, the effectiveness of the counterflow increased from 10% to 22% rather than the parallel flow. However, we verified that the increment in the friction factor of the counterflow is not large compared to the increment in the heat transfer rate.

• Journal of the Korean association of regional geographers
• /
• v.8 no.1
• /
• pp.40-64
• /
• 2002

The locational characteristics of ceramic industry in Miryang city, Kyongnam province, were clarified by means of examining the process of its formation, spatial variation, locations and their changes. The government policy on industry and the business fluctuation are important in the quantitative changes of the industry. The spatial variation of industry toward the outer part of area are the results of equilibrium between the decrease of firms in inner city and the increase of firms in outer part. The births and deaths of firms played important role in the processes of spatial variations. The industry location has lasted by the accumulation of location decision of 'potential entrepreneurs' who learned knowledges on the industry and had personal contacts with the business-related persons for long time. The main factors on the locational decision of firms are personal factor, raw materials, land, water and market. The locational problems have mainly related with plant expansion, land, marketing, labour and capital. They caused investment changes and caused relocations of firms. Such disadvantages as raw material exhaustion, shortage of land and congestion within the agglomeration area, development of road transportation and local government policy on industry location, induced recent decentralization of industry to outer part.

• Asia pacific journal of information systems
• /
• v.21 no.2
• /
• pp.59-87
• /
• 2011

These days, firms are focusing on the improvement of relationships with business partners. The supply chain integrations are taking critical role in improving the relationships with business partners. In accordance with the development of the IT technology, it became possible for firms not only to integrate inner parts of the organization, but also to integrate the company with other organizations in the supply chain. Therefore, in e-Biz environments, it is imperative for firms to strengthen the core capacity through the supply chain, and to precisely determine the components of the determinants of e-Business integration which impact the firm performance. This study analyzed determinants that have impacts on e-business integration in e-business capacity perspectives in competitive environments. This study based on the premise that the resources and capacities that Grant(1991) and Hart(1995) emphasized do not directly influence the corporate performance. This study focused on the fact that corporate must create core competencies based on these capacities to establish competitive edge. Therefore, this study model analyzed to find out which e-Biz competencies are needed to integrate e-Biz according to competitive environment elements. This study designed to empirically analyze the impact of the e-Biz competencies to the e-Biz integration and to the corporate performance. Independent variables of this study-IT management, partner management, e-Biz knowledge, e-Biz establishment and proliferation, process innovation-are selected based on precedent studies on e-Biz competencies. We selected intermediate variables to verify that e-Biz competencies do not have direct impact on the corporate performance, but have impact on the e-Biz integration, which is intermediate effect. That is to verify that if the components of supply chain improve the integration level using e-Biz competencies, the overall supply chain performances will improve. Dependent variables are selected to verify that e-Biz integration has impacts on corporate performances. This study used factor analysis, path analysis, moderating effect analysis as statistical tests. First, we used exploratory factor analysis and confirmatory factor analysis to analyze reliability and validity. Because e-Biz competencies are presented variously by preceding studies, we used SPSS16.0 to verify if survey questionnaire used by theoretical backgrounds is properly composed. Second, we tested the property of structure model by AMOS. We did path analysis using AMOS16.0 to test structure that is composed of e-Biz competencies and e-Biz integration. Last, we tested moderating effects of measure factors. We analyzed 163 domestic companies to find out many significant suggestive points. First, relationship improvement capacity, e-business knowledge sharing capacity with business partners, and process innovation capacity are adopted as determinants of differentiation and competitive edges against competing firms. Second, e-business knowledge sharing capacity, and process innovation capacity are analyzed as the determinants of e-business integration in the firm which demand fluctuation in the market is high. On the other hand, among the determinants that require capturing ideas on new products, and strengthening the technological power, process innovation capacity are adopted as the determinants. These results provide us the foundation that the determinants that we have analyzed can impact the supply chain integration strategies which take into account the competitive environments.