• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2713-2717
• /
• 2008

Whole flow fields of a room air conditioner (RAC) have been visualized by a Particle Image Velocimetry (PIV) technique to analyze the flow structure with various inlet and outlet angles, and to control an eccentric vortex which affects an efficiency and noise of the RAC. A test model with 5 stages of a cross flow fan has been manufactured and a transparent acryl has been installed at the side of the test model for the PIV experiment. The inlet and outlet flows and the flow inside the cross flow fan have been analyzed by varying the inlet grill angles and outlet blade angles. The movement of the eccentric vortex has been investigated experimentally by developing the measurement technique for the inner flow field of the cross flow fan. From the visualization of the inner flows, the origins of the noise inside the RAC and the condensation points around the outlet parts of the cold air have been observed and the solution of the problems can be proposed in this study.

• Physical Therapy Rehabilitation Science
• /
• v.8 no.3
• /
• pp.141-145
• /
• 2019

Objective: The purpose of this study was to compare walking conditions (straight line and curved path) on walking patterns in persons who had experienced hemiplegic stroke and to determine whether if they adapt their walking pattern and performances according to changes in environmental conditions. Design: Cross-sectional study. Methods: Forty-four hemiplegic stroke survivors participated in this study. This study measured walking performance in three different walking conditions, such as straight walking, the more-affected leg in the inner curve walking, and less-affected leg in the inner curve walking conditions, and a 2-dimentional gait analysis system was used as a primary measurement. This study also measured secondary clinical factors including the Timed Up-and-Go Test, the Trunk Impairment Scale, and the Dynamic Gait Index. Results: After analyzing, cadence and step length of the less-affected side, stride length in the more-affected side, and stride length in less-affected side were significantly different among the three different walking conditions in this study (p<0.05), but other temporospatial parameters were not significant. Cadence was the largest in the straight walking condition. Step length in the less-affected side, stride length in the more-affected side, and stride length in less-affected side were also the longest in the straight walking condition. Conclusions: The results of the study suggest that hemiplegic stroke survivors show walking adaptability according to changes in walking demands and conditions, and moreover, cadence and step and stride lengths were significantly different between straight and curved walking conditions.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.737-744
• /
• 2021

An investigation is conducted to study a solid-liquid mixture vertically upward hydraulic transport of solid particles by non-Newtonian fluids in the Mud system. Rheology of particulate suspensions in viscoelastic fluids is of importance in many applications such as particle removal from surfaces, transport of proppants in fractured reservoir and cleaning of drilling holes, etc. In this study a clear acrylic pipe was used in order to observe the movement of solid particles. Annular velocities varied from 0.4 m/s to 1.2 m/s. The mud systems which were utilized included aqueous solution of sodium carboxymethyl cellulose (CMC) solutions. Main parameters considered in the study were inner-pipe rotary speed, fluid flow regime and particle injection rate. Solid volumetric concentration and pressure drops were measured for the various parameters such as inclination angle, flow rate, and rotational speed of inner cylinder.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.371-381
• /
• 2017

This paper presents a methodology for creating abstract animation based on the human movement theories originating from the work of dance theorist Rudolf von Laban. Laban Movement Analysis is a method and language for describing, visualizing, interpreting and documenting all varieties of human movement, and Choreutics is based on universal patterns of nature and of human as part of a universal design. Laban defines the space of movements in a profoundly dualistic way. Outwardly, his objective and scientific definitions provide a concrete base for generating human movements in computer graphics in terms of geometric and motion primitives such as points, lines, planes, polygons, linear and nonlinear movements. On the other hand, he also offers a system for understanding the subtle characteristics about the way a movement is dynamically done with respect to inner intention. Laban's interpretations of human motion can be utilized potentially in plastic arts and computer arts. Our work was inspired by those physical and psychological analyses and computer algorithms have been developed for creating abstract animation. We presented our computer animation works entitled "Choreography" in the exhibitions: a special section in "2015 Craft Trend Fair" and "Make Your Movement" held in the Korean Cultural Centre in UK, 2016. In this paper, we describe our ideas and methods for creating abstract object movements based on the Laban's motion representations.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.4
• /
• pp.554-564
• /
• 2013

This study identified the characteristic and meaning of flow experience through the experiences related to fashion models' role performance; subsequently, the following findings were obtained. First, fashion models' flow experience could be divided into characteristics such as temporality, spatiality, relationality, physicalness and pleasure. Second, the process of this flow experience ultimately led to the complete moment. The complete moment can be said to be the aesthetic experience that provides both the meaningful experience and the aesthetic pleasure; it is the experiential knowledge at the dimension of mysterious integration that their body and mind are integrated into one. The beauty that fashion models exercise at the aspect of this aesthetic experience is that of performance and is an individual physical movement where they perceive their role and exercise their inner ability to express their costume most beautifully. Accordingly, the beauty of performance can be said to mean that the fashion show was successfully held by inducing both the performer and the audience into an aesthetic response. The process of specialized planning and preparation is required for fashion models to exercise the beauty of performance at the complete movement reached through flow experience and a successful fashion show. Diverse elements of the fashion show should be more organically constituted through such a process. Fashion models should exert efforts to embody acts such as walking, posing and turning through the performance of their excellent role as well as develop a training program to complete it.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1132-1139
• /
• 2010

The steel pipe of steel-concrete composite piles increases the pile strength and induces the ductile failure by constraining the deformation of the inner concrete. In this research, the load-movement relations and the reinforcement effect by the outer steel pipe in the steel-concrete composite pile were analyzed by performing three-dimensional numerical analyses, which can simulate the yielding behavior of pile material and the elasto-plastic behavior of soils. The parameters analyzed in the study include three pile materials of steel, concrete and composite, pile diameter, pile distance and loading direction. As the results, the axial capacity of the composite pile was about 73% larger than that of the steel pipe pile and about 14% larger than that of the concrete pile. In addition, the horizontal movement at the pile head of the composite pile was about 51% of that of the steel pile and about 19% of that of the concrete pile.

• Journal of architectural history
• /
• v.16 no.4
• /
• pp.131-148
• /
• 2007

This study aims at searching the Church Building Type and Design Sources of a German church architect who had designed many churches and other buildings in Korea. P. Alwin Schmid(1904-1978) had designed 188 Catholic buildings in Korea for 20 years from 1958 to 1978. In his works there are many excellent Catholic ritual buildings. It was caused by his conviction on the theology and the principles of Church Architecture. And His remarkable achievement is affected by the works of Dominikus Bom(1880-1955) and Rudolf Schwarz(1897-1961). Alwin's 5 plan type is relevant to Schwarz' iconographic model, and their approach to 'light' is much the same. But the Character of inner space is the middle of Dominikus Bom and Rudolf Schwarz. His works rotted in the Liturgical Movement had been developed in the line of connection with 20th German church architecture. The works of Dominikus Bom and Rudolf Schwarz played the role of the teacher of Alwin Schwarz.

• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.75-82
• /
• 2015

PURPOSES : In link matching using vehicular trajectory in a car navigation system, it is technically difficult to match the location of the subject vehicle with a link on an electronic map in the vehicle on a grade separation highway segment consisting of an elevated highway and atgrade highway, because of the overlap of geometric lines of the two highways. This study was initiated to propose a link matching algorithm using the characteristics of vehicular movement of the subject vehicle. METHODS : The selected test site is the highway segment between Jeong-reung IC and Gil-eum IC where the Inner Circulation Road and Jeong-reung-ro run together. To evaluate the proposed algorithm, this study collected the raw packet data of vehicles that drove on the test site. In a simulation environment, link matching was performed using an existing algorithm as well as the proposed algorithm. RESULTS: It was clearly found that the characteristics of vehicular movements are different on the two highways. CONCLUSIONS: The proposed algorithm outperformed the existing algorithm.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.4
• /
• pp.102-112
• /
• 1994

The drying shrinkage of concrete has a close relation to the water movement. Since the diffusion process of water in concrete is strongly dependent on the temperature and the pore humidity, the process is highly nonlinear phenomena. This study consists of two parts. The first is the development of a finite element program which is capable of simulating the rnoisture distri- ,bution in concrete, and the other is the estimation of the differential drying shrinkage and stress considering creep by using the modified elastic modulus due to inner temperature change and maturity. It is shown that the analytical results of this study are in good agreement with experlimental data in the literatures, and results calculated by BP-KX model. The internal stress caused by moisture distribution which was resulted from the diffusion process, was calculated :quantitatively. The tensile stress which occured in the drying outer zone mostly exceeded the tensile strength of concrete, and necessarily would result in crack formation.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.2
• /
• pp.93-100
• /
• 2018

Objective: The purpose of this study is to analyze the kinematic characteristics of the national speed skaters in the curve phase of 500-m race. Method: Seven national skaters participated in the study. Race images were acquired using a high - speed camera, and the three-dimensional motion was analyzed. Results: For skaters, whose average velocity in the curve phase is high, the velocity of entry into the straight phase was also fast. The fast skaters showed a larger maximum angle of extension of the knee joints than the relatively slow skaters, and the trunk ROM was smaller. Fast skaters tended to match the timing of the movement of the lower limb with the pelvis, while slow skaters tended to rotate the left pelvis backward. The velocity of the curve phase did not show a clear relationship with stroke time, average trunk angle, and lap time. Conclusion: It is important to skate close to the inner line, keep the trunk ROM below 10 degrees, extend the knee angle to over 160 degrees, and match the movement of the pelvis and lower limb to accelerate in the curve phase. The average velocity of the curves was fast for many athletes, but the competition rankings were low. Therefore, it is possible to improve the performance by optimizing the start technique, the running characteristics of the straight phase, and the physical factors.