• 대한관절경학회지
• /
• 제2권1호
• /
• pp.1-3
• /
• 1998

The PCL reconstruction in chronic isolate PCL reconstruction was still controversy. 1) In isolate PCL deficient knee, functionally not so bad as like ACL deficient knee. 2) The result of the PCL reconstruction was not as good as ACL reconstruction. Therefore, isolate PCL injuries has been treated as nonoperatively. Hey Grovere, who was the first to attempt an intra-articular reconstruction of the PCL, utilized the semi-tendinous tendon other static procedures have been described in only a few cases with very limited follow-up. Dynamic procedures utilizing the medial head of the gastrocnemius has been reported by Hugston and Degenhardt, Kennedy and Grainger, and Insall and Hood. These procedures did not improve static stability. Dr Clancy, who was introduce the use of BPTB for the PCL reconstruction transtibial and femoral tunnel. From 1995, untill early 1990 PCL reconstruction was done as tend as placement of the isometric point. Physiometic placement of Anatomical placement of the femoral tunnel in PCL reconstruction were introduced in 1995. Tibial Inlay Technique was reported by Dr Berg in 1995. The main advantage of the tibial Inlay Technique was to avoid fraying of the graft at the posterior tibial tunnel orifice. In complete PCL ruptured and severely posterior unstable knee, dual femoral tunnel technique will be to get better result than one bundle technique. To achieve restoration of normal posterior laxity, it is critical to address the posterior as well as the posterolateral structures. Futher research is necessary to evaluate new surgical approches such as double-bundle reconstructions and tibial inlay techniques as well as improved techniques for capsular and collateral ligament injuries.

• 대한관절경학회지
• /
• 제5권2호
• /
• pp.80-84
• /
• 2001

목적 : Tibial Inlay 방법을 이용한 후방 십자 인대 재건술의 임상적, 방사선학적 결과를 알아보고자 하였다. 대상 및 방법 : 1996년 2월부터 후방 십자 인대 부전증으로 tibial inlay 방법으로 후방 십자 인대 재건술을 시행하고 2년 이상 추시가 가능했던 24명, 25예를 대상으로 Lysholm knee score 및 후방전위 검사, 층형성(step off sign) 등의 임상적 결과와 $Telos^{\circledR}$ 기구(Telos stress device; Austin & Associates, Inc., Polston, US)를 이용한 슬관절 후방 전위 방사선 사진을 촬영하여 건측과 비교하여 안정성 여부를 측정하였다. 수술시 평균나이는 35세였고 평균 추시는 34개월($24\~53$개월)이었다. 결과 : Lysholm knee score는 술전 평균 56.9점에서 최종 추시상 94.6점으로 호전되었고 후방전위검사는 술전 Grade II 1예, Grade III 18예, Grade IV 6예였던 것이 술후 Grade I 12예, Grade II 10예, Grade III 3예로 회복되었다. step off sign도 술전 -10mm 6예, -5mm 18예, flush 1예였던 것이 술후 -5mm 3예, flush 10예, +5mm 12예로 호전되었다. $Telos^{\circledR}$ 기구를 이용한 후방 전위 방사선 사진상 반대측과 비교하여 술전 평균 13.6$(9\~31)$mm의 차이를 보였으나 추시상 평균 4.3$(1\~10)$mm로 호전되었다. 결론 : Tibial Inlay 방법을 이용한 후방 십자 인대 재건술은 경골 부착부에 직접 이식건을 견고하게 고정할 수 있어 이식건의 마모가 없고 비교적 큰 이식건을 사용할 수 있는 장점이 있고, 2년 이상의 추시상 임상적 및 방사선학적으로 좋은 결과를 보여 후방 십자 인대 재건술의 좋은 술식으로 생각된다.

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.619-627
• /
• 1996

There are increasing use of composite resin in the posterior teeth and the new indirect inlay technique was introduced for compensating much troubles faced in direct technique. Many researchers insisted that overall properties of restorative materials were enhanced by an additional curing but this technique still has a problems about using cement material. Resin inlay obtains retention force from friction and another adhesion to tooth structure. A shape of cavity preparation was noted but studies about cement thickness and bond strength with cavity divergency are rare. The purpose of this study is to assess the effect of cavity divergency on cement thickness and bond strength of resin inlay. Cavities, which divergency was $6^{\circ}$, $16^{\circ}$, and $26^{\circ}$ in each group, were prepared and their divergency was verified by Adobe Photoshop program through the image capture with stereo microscope and FlexCam. Inlays were fixed into the cavities with a resin cement, Superbond and were handled under chemical (in 75% ethanol for 24 hrs.) and thermal stress (500 cycles from $5^{\circ}$ to $55^{\circ}C$). MXT 70 (x400) was used for measuring the cement thickness and bond strength was evaluated with a universal testing machine. Following results were obtained : 1. The cement thickness in Mean (S.D.) were; 35.58 (10.31)${\mu}m$ in $6^{\circ}$ group, 35.97 (10.49)${\mu}m$ in $16^{\circ}$ group, and 41.43 (9.33)${\mu}m$ in $26^{\circ}$ group. But there was no significant difference between groups. 2. The bond strength in Mean (S.D.) were ; 33.18 (5.53)kg in $6^{\circ}$ group, 23.47 (13.40)kg in $16^{\circ}$ group, and 19.75 (10.48)kg in $26^{\circ}$ group. $6^{\circ}$ group showed significantly higher value compared to $16^{\circ}$ and $26^{\circ}$ groups (p<0.05). Although the results of this study indicate $6^{\circ}$ divergency will be good for resin inlay, cavity preparation with this type will have lots of difficulties in manufacturing, try-in, and cementation procedures, such as deformation. So it is concluded that $16^{\circ}$ divergent cavity preparation is recommended in resin inlay technique.

• 대한치과보철학회지
• /
• 제38권3호
• /
• pp.366-374
• /
• 2000

FRC/ceromer system provides the clinician with a durable, flexible, and esthetic alternative to conventional porcelain fused to metal crowns. FRC is the matrix which is silica-coated and embedded in a resin matrix. The ceromer material which is a second generation indirect composite resin contains silanized, microhybrid inorganic fillers embedded in a light-curing organic matrix. FRC/ceromer restoration has a several advantages: better shock absorption, less wear of occluding teeth, translucency, color stability, bonding ability to dental hard tissues, and resiliency. It has versatility of use including inlay, onlay, single crown, and esthetic veneers. With adhesive technique, it can be used for single tooth replacement in forms of inlay adhesion bridge. In single tooth missing case, conventional PFM bridge has been used for esthetic restoration. However, this restoration has several disadvantages such as high cost, potential framework distortion during fabrication, and difficulty in repairing fractures. Inlay adhesion bridge with FRC/ceromer would be a good alternative treatment plan. This article describes a cases restored with Targis/Vectris inlay adhesion bridge. Tooth preparation guide, fabrication procedure, and cementation procedure of this system will be dealt. The strength/weakness of this restoration will be mentioned, also. If it has been used appropriately in carefully selected case, it can satisfy not only dentist's demand of sparing dental hard tissue but also patient's desire of seeking a esthetic restorations with a natural appearance.

• Journal of Audiology & Otology
• /
• 제23권3호
• /
• pp.140-144
• /
• 2019

Background and Objectives: Inlay butterfly cartilage tympanoplasty makes the graft easy, and reduces operating time. The present study aimed to investigate the outcomes of microscopic versus endoscopic inlay butterfly cartilage tympanoplasty. Subjects and Methods: In this retrospective study, the outcomes of 63 patients who underwent inlay butterfly cartilage tympanoplasty with small to medium chronic tympanic membrane perforation were evaluated. Twenty-four patients underwent conventional microscopic tympanoplasty and 39 underwent endoscopic tympanoplasty. The outcomes were analyzed in terms of the hearing gain and graft success rate. Results: The surgical success rate was 95.8% in the patients who underwent conventional microscopic tympanoplasty and 92.3% in those who underwent endoscopic tympanoplasty. In both groups of patients, the postoperative air-bone gap (ABG) was significantly lower than the preoperative ABG. There were no significant differences between the preoperative and postoperative ABG values in either group. Conclusions: Endoscopic inlay tympanoplasty using the butterfly cartilage technique appears to be an effective alternative to microscopic tympanoplasty and results in excellent hearing.

• 대한청각학회지
• /
• 제23권3호
• /
• pp.140-144
• /
• 2019

Background and Objectives: Inlay butterfly cartilage tympanoplasty makes the graft easy, and reduces operating time. The present study aimed to investigate the outcomes of microscopic versus endoscopic inlay butterfly cartilage tympanoplasty. Subjects and Methods: In this retrospective study, the outcomes of 63 patients who underwent inlay butterfly cartilage tympanoplasty with small to medium chronic tympanic membrane perforation were evaluated. Twenty-four patients underwent conventional microscopic tympanoplasty and 39 underwent endoscopic tympanoplasty. The outcomes were analyzed in terms of the hearing gain and graft success rate. Results: The surgical success rate was 95.8% in the patients who underwent conventional microscopic tympanoplasty and 92.3% in those who underwent endoscopic tympanoplasty. In both groups of patients, the postoperative air-bone gap (ABG) was significantly lower than the preoperative ABG. There were no significant differences between the preoperative and postoperative ABG values in either group. Conclusions: Endoscopic inlay tympanoplasty using the butterfly cartilage technique appears to be an effective alternative to microscopic tympanoplasty and results in excellent hearing.

• Restorative Dentistry and Endodontics
• /
• 제18권1호
• /
• pp.55-72
• /
• 1993

The aim of this study was to compare the marginal leakage of class II light curing composite resin restoration according to filling methods. With using acid etching technique and dentin bonding agent, various methods were suggested to eliminate or reduce the marginal leakage. In this study, class II cavities were prepared in 100 extracted human premolars with cementum margin(1mm below the CEJ) and the teeth were randomly assigned to 5 groups of 20 teeth each. The teeth in group 1, 2, 3 and 4 were restored by direct filling methods using P-50 and Clearfil Photoposterior of 10 teeth each, but the method of insertion of the restorative materials varied with each group. And the teeth in group 5 were restored by inlay method using Kulzer Inlay and CR Inlay. Filling methods are as follows : Group 1 : The composite resin was inserted in one layer in the proximal box and one layer in the occlusal portion. Group 2 : Insertion was in two equally thick horizontal layers in the proximal box. Group 3 : Insertion was in two diagonally placed layers in the proximal box. Group 4 : The composite resin was inserted in the same way as in group 3 except that a glass ionomer liner was first placed on the axial wall and gingival floor. Group 5 : The teeth were restored by Inlay technique using dure cure resin cement. All the teeth were thermocycled, stained with 1 % methylene blue solution, sectioned mesiodistally, and scored for marginal leakage. To compare the marginal leakage, ANOVA and T-test were used in analysis. The following results were obtained : 1. In direct filling methods, there was no significant difference in marginal leakage at both occlusal and cervical margins. 2. In all groups, occlusal margin showed significantly less leakage than cervical margin. 3. In group using glass ionomer liner, there was no significant reduction of marginal leakage at the cervical margin. 4. The group restored by inlay method showed significantly less marginal leakage than groups restored by direct filling methods at both occlusal and gingival margins. 5. There was no significant difference in each group according to filling materials.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.191-205
• /
• 1992

The purpose of this study was to evaluate the microleakage of class II composite resin inlays and compare them with the conventional light-cured resin filling restorations. Class II cavities were prepared in 60 extracted human molars with which cervical margins were located below 1.0mm at the cemento-enamel junction using No. 701 tapered fissure carbide bur. All of the prepared cavities were restored as follows and divided into 6 groups. Group I and 2 were restored using direct filling technique and group 3,4,5 and 6 were restored using direct inlay technique that was cemented with dual-cured resin cements. group I: Cavities were restored with light-curing composite resin, Brilliant Lux. group 2. Cavities were restored with light-curing composite resin, Clearfil PhotoPosterior. group 3: Cavities were restored with Clearfil CR Inlay and heat treated at $125^{\circ}C$ for 7 minutes. group 4: Cavities were restored with same material as group 3 and heat treated at $100^{\circ}C$ for 15 minutes. group 5: Cavities were restored with Brilliant (Indirect esthetic system) and heat treated at $125^{\circ}C$ for 7 minutes. group 6: Cavities were restored with same material as group 5 and heat treated at $100^{\circ}C$ for 15 minutes. All specimens were polished with same method and thermocycled between $6^{\circ}C$ and $60^{\circ}C$, then immersed in a bath of 2.0% aqueous solution of basic fuchsin dye for 24 hours. Dyed specimens were sectioned longitudinally and dye penetration degree was read on a scale of 0 to 4 by Tani and Buonocore's method 45). The results were as follows: 1. Microleakage was observed rather at the cervical margins than at the occlusal margins in all groups. 2. Composite resin inlay groups showed significantly less leakage than direct filling groups at the cervical margins (p < 0.001). 3. In composite resin inlay groups, there was no significant difference in microleakage between specimens by heat treating temperature and time (p > 0.05). 4. There was no significant difference in leakage between each groups at the occlusal margins (p > 0.05).

• 헤리티지:역사와 과학
• /
• 제54권2호
• /
• pp.216-239
• /
• 2021

공예품의 표면에 홈을 파고 금속 재료를 감입하는 시문 기법인 입사(入絲)는 조선시대 왕실의 일상 생활용품, 의례품, 관청의 공적 기물에 두루 사용되었다. 조선시대 관영수공업은 중앙관청에 소속된 경공장(京工匠), 지방의 외공장(外工匠)으로 구성된 관장(官匠)을 중심으로 운영되었다. 입사장은 경공장에 편입되어 왕실과 중앙관청의 공예품 입사시문을 담당했다. 현재 전해지는 조선시대 입사장에 대한 기록은 관영수공업에 집중되어 있다. 관영수공업에서의 입사장의 배속 관청은 공조와 상의원, 군영으로 나눌 수 있으며, 여기에 앞의 두 소속 장인의 도감 차출이 있다. 입사공예품을 사용하는 관청과 군영에 입사장을 배치하고, 제작 마감 기한이 촉박해 평소보다 세밀한 분업과 협업이 전개되었던 도감에서는 입사장을 입사장, 은입사장으로 나누어 공역에 투입했다. 이를 통해 제작 상황과 보유 기술을 고려해 유동적으로 장인을 배치해 공예품 제작이 이루어졌음을 알 수 있었다. 이러한 제작 체제의 운영은 장인의 손기술로 모든 공예품을 제작해야 했던 근대 이전 조선 사회에서는 필수적인 것이었다. 본 논문은 입사장을 중심으로 조선시대 관영수공업에서 장인의 역할과 직무 형태를 유형을 나누어 살펴보았다. 직능의 특성과 재료, 인력 수급 등 세부적으로 적용되는 내용은 다르지만, 조선이 추구했던 기본적인 관영수공업 정책의 틀 안에서 장인의 기술을 통한 다양한 목적의 공예품 구현을 위한 여러 제도적 장치는 거의 공통적이었다. 앞으로 의궤에 기록된 재료와 도구, 소수이지만 문헌에 기록된 관장과 사장의 기록을 더해 기술 문화를 분석한다면 조선시대 공예를 보다 입체적으로 접근하는 데 도움이 될 것이라 생각한다.

• 대한정형외과스포츠의학회지
• /
• 제3권2호
• /
• pp.128-133
• /
• 2004

목적: 경골 Inlay 방법으로 자가 골-슬개건-골을 이용한 후방 십자 인대 재건술의 합병증을 알아 보고자 하였다. 대상 및 방법: 1994년 9월부터 2004년 1월까지 경골 Inlay방법으로 후방 십자 인대 재건술을 시행한 57명 58예를 대상으로 수술의 합병증에 대해 분석하였다. 남자가 50명, 여자는 7명이며, 평균 연령은 35세(15$\~$73세)였다. 후방 십자 인대 단독 손상은 28예, 슬관절내 동반 손상이 있는 경우가 30예였다. 원인 별로는 교통 사고가 39예로 가장 많았고, 운동 손상이 7예, 넘어진 손상이 7예, 기타 5예였다. 추시 검사는 술 후 4주, 3개월, 6개월, 1년째 외래 방문을 하게 하였다. 분석 방법은 슬관절의 안정성을 측정하기 위해서 KT-2000TM 슬관절 계측기 및 긴장 방사선 촬영을 사용하였고, Lysholm Knee Score와 임상적 합병증을 평가하였다. 결과: 수술 전 Lysholm Knee Score는 평균 43.2점에서 최종 추시상 87.9점으로 향상되었다 $KT-2000^{TM}$ 슬관절 계측기 검사 상 수술 전 평균 8.75 mm(6.2$\~$l4.3 mm)에서 최종 추시상 3.41 mm (2.1$\~$l0.6 mm)로 향상되었다. 수술 중 합병증으로 슬와 동맥 파열과 동반된 구획 증후군이 1예에서 발생되었으며, 슬개골 골절 1예, 20$^{\circ}$ 이상의 굴곡 운동 범위 감소가 2예, 근위 경골부의 고정 나사가 경골 전면부에 돌출되는 경우가 2예에서 있었다. 수술 후 합병증으로 동요 관절이 11예, 슬개골 골절이 1예, 슬관절의 신전 운동 범위 제한이 5예 및 굴곡 운동 범위 제한이 13예에서 관찰되었으며, 슬관절 주위 통증 21예, 무릎을 꿇을 때 통증이 8예 관찰되었다 결론: 경골 Inlay 방법으로 자가 골-슬개건 -골을 이용한 후방 십자 인대 재건술의 다양한 합병증이 발생되어 수술 및 수술 후 재활시 세심한 주의가 요구된다.