• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.191-205
• /
• 1992

The purpose of this study was to evaluate the microleakage of class II composite resin inlays and compare them with the conventional light-cured resin filling restorations. Class II cavities were prepared in 60 extracted human molars with which cervical margins were located below 1.0mm at the cemento-enamel junction using No. 701 tapered fissure carbide bur. All of the prepared cavities were restored as follows and divided into 6 groups. Group I and 2 were restored using direct filling technique and group 3,4,5 and 6 were restored using direct inlay technique that was cemented with dual-cured resin cements. group I: Cavities were restored with light-curing composite resin, Brilliant Lux. group 2. Cavities were restored with light-curing composite resin, Clearfil PhotoPosterior. group 3: Cavities were restored with Clearfil CR Inlay and heat treated at $125^{\circ}C$ for 7 minutes. group 4: Cavities were restored with same material as group 3 and heat treated at $100^{\circ}C$ for 15 minutes. group 5: Cavities were restored with Brilliant (Indirect esthetic system) and heat treated at $125^{\circ}C$ for 7 minutes. group 6: Cavities were restored with same material as group 5 and heat treated at $100^{\circ}C$ for 15 minutes. All specimens were polished with same method and thermocycled between $6^{\circ}C$ and $60^{\circ}C$, then immersed in a bath of 2.0% aqueous solution of basic fuchsin dye for 24 hours. Dyed specimens were sectioned longitudinally and dye penetration degree was read on a scale of 0 to 4 by Tani and Buonocore's method 45). The results were as follows: 1. Microleakage was observed rather at the cervical margins than at the occlusal margins in all groups. 2. Composite resin inlay groups showed significantly less leakage than direct filling groups at the cervical margins (p < 0.001). 3. In composite resin inlay groups, there was no significant difference in microleakage between specimens by heat treating temperature and time (p > 0.05). 4. There was no significant difference in leakage between each groups at the occlusal margins (p > 0.05).

• Clinics in Shoulder and Elbow
• /
• 제26권4호
• /
• pp.380-389
• /
• 2023

Background: Total shoulder arthroplasty (TSA) with a nonspherical humeral head component and inlay glenoid is a successful bone-preserving treatment for glenohumeral arthritis. This study aimed to describe the 90-day complication profile of TSA with this prosthesis and compare major and minor complication and readmission rates between inpatient- and outpatient-procedure patients. Methods: A retrospective review was performed of a consecutive cohort of patients undergoing TSA with a nonspherical humeral head and inlay glenoid in the inpatient and outpatient settings by a single surgeon between 2017 and 2022. Age, sex, body mass index, American Society of Anesthesiologists (ASA) score, Charlson Comorbidity Index (CCI), and 90-day complication and readmission rates were compared between inpatient and outpatient groups. Results: One hundred eighteen TSAs in 111 patients were identified. Mean age was 64.9 years (range, 39-90) and 65% of patients were male. Ninety-four (80%) and 24 (20%) patients underwent outpatient and inpatient procedures, respectively. Four complications (3.4%) were recorded: axillary nerve stretch injury, isolated ipsilateral arm deep venous thrombosis (DVT), ipsilateral arm DVT with pulmonary embolism requiring readmission, and gastrointestinal bleed requiring readmission. There were no reoperations or other complications. Outpatients were younger with lower ASA and CCI scores than inpatients; however, there was no difference in complications (1/24 vs. 3/94, P=1.00) or readmissions (1/24 vs. 1/94, P=0.37) between these two groups. Conclusions: TSA with a nonspherical humeral head and inlay glenoid can be performed safely in both inpatient and outpatient settings. Rates of early complications and readmissions were low with no difference according to surgical setting. Level of evidence: IV.

• 대한관절경학회지
• /
• 제5권2호
• /
• pp.80-84
• /
• 2001

목적 : Tibial Inlay 방법을 이용한 후방 십자 인대 재건술의 임상적, 방사선학적 결과를 알아보고자 하였다. 대상 및 방법 : 1996년 2월부터 후방 십자 인대 부전증으로 tibial inlay 방법으로 후방 십자 인대 재건술을 시행하고 2년 이상 추시가 가능했던 24명, 25예를 대상으로 Lysholm knee score 및 후방전위 검사, 층형성(step off sign) 등의 임상적 결과와 $Telos^{\circledR}$ 기구(Telos stress device; Austin & Associates, Inc., Polston, US)를 이용한 슬관절 후방 전위 방사선 사진을 촬영하여 건측과 비교하여 안정성 여부를 측정하였다. 수술시 평균나이는 35세였고 평균 추시는 34개월($24\~53$개월)이었다. 결과 : Lysholm knee score는 술전 평균 56.9점에서 최종 추시상 94.6점으로 호전되었고 후방전위검사는 술전 Grade II 1예, Grade III 18예, Grade IV 6예였던 것이 술후 Grade I 12예, Grade II 10예, Grade III 3예로 회복되었다. step off sign도 술전 -10mm 6예, -5mm 18예, flush 1예였던 것이 술후 -5mm 3예, flush 10예, +5mm 12예로 호전되었다. $Telos^{\circledR}$ 기구를 이용한 후방 전위 방사선 사진상 반대측과 비교하여 술전 평균 13.6$(9\~31)$mm의 차이를 보였으나 추시상 평균 4.3$(1\~10)$mm로 호전되었다. 결론 : Tibial Inlay 방법을 이용한 후방 십자 인대 재건술은 경골 부착부에 직접 이식건을 견고하게 고정할 수 있어 이식건의 마모가 없고 비교적 큰 이식건을 사용할 수 있는 장점이 있고, 2년 이상의 추시상 임상적 및 방사선학적으로 좋은 결과를 보여 후방 십자 인대 재건술의 좋은 술식으로 생각된다.

• Restorative Dentistry and Endodontics
• /
• 제15권2호
• /
• pp.122-126
• /
• 1990

To examine the microleakage of posterior esthetic restorative materials, using 2% methylene blue dye solution, dye penetration was determined with 80 permanent posterior teeth after thermocycling. The following results were obtained. 1. Amalgam group showed the most severe dye penetration of all test groups through the enamel and dentin / cementum margins. 2. Clearfil group showed much more dye penetration than P-50 at the enamel margin and than resin inlay system at the dentin / cementum margin. 3. Through the etched enamel margin, P-50 and resin inlay system groups showed no dye penetration, if any, but through the dentin / cementum margin, all test groups showed dye penetration. 4. Resin inlay system showed the least dye penetration of all test groups through the dentin / cementum margin.

• 보존과학연구
• /
• 통권20호
• /
• pp.65-80
• /
• 1999

The conservation treatment process of sword is below. First, examples written inlay with tortoise-shell design is a big sword with round head excavated Namwon Wolsanri in Korea, big swordsexcavated the Sungchong Ⅱ tomb of Naranghyun, the Moksun Ⅰ tomb of Ejihyun, the Jangjonsan Ⅰ tomb of Dogunhyung in Japan. The period of inlay artifacts are known to about 6c. Therefore, sword is infer to beexcavated to 6c.Second, inlay artifacts excavated the domestic at present were known to 19-pieces. But sword is a big sword inlaid with silver to projecting hilt. This artifact is very important to scholarship data because of be first excavated to the domestic

• 대한정형외과스포츠의학회지
• /
• 제3권2호
• /
• pp.128-133
• /
• 2004

목적: 경골 Inlay 방법으로 자가 골-슬개건-골을 이용한 후방 십자 인대 재건술의 합병증을 알아 보고자 하였다. 대상 및 방법: 1994년 9월부터 2004년 1월까지 경골 Inlay방법으로 후방 십자 인대 재건술을 시행한 57명 58예를 대상으로 수술의 합병증에 대해 분석하였다. 남자가 50명, 여자는 7명이며, 평균 연령은 35세(15$\~$73세)였다. 후방 십자 인대 단독 손상은 28예, 슬관절내 동반 손상이 있는 경우가 30예였다. 원인 별로는 교통 사고가 39예로 가장 많았고, 운동 손상이 7예, 넘어진 손상이 7예, 기타 5예였다. 추시 검사는 술 후 4주, 3개월, 6개월, 1년째 외래 방문을 하게 하였다. 분석 방법은 슬관절의 안정성을 측정하기 위해서 KT-2000TM 슬관절 계측기 및 긴장 방사선 촬영을 사용하였고, Lysholm Knee Score와 임상적 합병증을 평가하였다. 결과: 수술 전 Lysholm Knee Score는 평균 43.2점에서 최종 추시상 87.9점으로 향상되었다 $KT-2000^{TM}$ 슬관절 계측기 검사 상 수술 전 평균 8.75 mm(6.2$\~$l4.3 mm)에서 최종 추시상 3.41 mm (2.1$\~$l0.6 mm)로 향상되었다. 수술 중 합병증으로 슬와 동맥 파열과 동반된 구획 증후군이 1예에서 발생되었으며, 슬개골 골절 1예, 20$^{\circ}$ 이상의 굴곡 운동 범위 감소가 2예, 근위 경골부의 고정 나사가 경골 전면부에 돌출되는 경우가 2예에서 있었다. 수술 후 합병증으로 동요 관절이 11예, 슬개골 골절이 1예, 슬관절의 신전 운동 범위 제한이 5예 및 굴곡 운동 범위 제한이 13예에서 관찰되었으며, 슬관절 주위 통증 21예, 무릎을 꿇을 때 통증이 8예 관찰되었다 결론: 경골 Inlay 방법으로 자가 골-슬개건 -골을 이용한 후방 십자 인대 재건술의 다양한 합병증이 발생되어 수술 및 수술 후 재활시 세심한 주의가 요구된다.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.33-54
• /
• 1995

The degree of conversion of composite resin was known to have influence on the mechanical properties of composite materials such as hardness, strength, wear resisitance, dimensional and color stability. Also unreacted monomer was reported to be harmful to the pulp. So the degree of conversion was a very important factor in the success of composite resin restorations. In recent, the dual cure resin cement was developed with the advocations that it could increase the curing rates in the sites where the curing ligt could not reach. Moreover many manufactors added some adhesive components in the resin cement. This study was undertaken to observe the effects of curing depth and light curing times on the degree of conversion of dual cure resin cements. CR INLAY CEMENT, DUAL CEMENT and OPTEC BOND, by the Fourier transform Infrared analysis, changing the curing depth 1mm, 2mm and 3mm, and varying the light curing time 20 seconds, 40 seconds and 80 seconds at each depth. The cytotoxicity of dual cure resin cements was tested by the in vitro MTT method using L929 cell. The results was evaluated and compared statistically. The results were obtained as follows : 1. The dual cure resin cements reavealed various degree of conversion, CR INLAY CEMENT and DUAL CEMENT had a tendency to be more reactive to the light cure and OPTEC BOND was a more chemical one. 2. CR INLAY CEMENT and DUAL CEMENT showed the lowest degree of conversion in 2 mm depth, and in 3mm depth the degree of conversion increased, which were due to the chemical cure of dual cures, but OPTEC BOND showed decreasing degree of conversion with increasing curing dept h and all experimental groups showed lower degree of conversion than CHEMICAL group which cured in dark room with no light, so the weak light-curing of dual cure resin cement prevented the chemical cure. (P<0.05) 3. CR INLAY CEMENT and DUAL CEMENT showed increasing degree of conversion in 1 mm and 3 mm, according to the increasing cure times, but in 2 mm depth the degree of conversion decreased with increasing light-curing times and OPTEC BOND showed contrary tendency, but there was no ststistical importance in the differences among the experimental group.(P>0.05) 4. The optical density by MTT assay of extractions of CR INLAY CEMENT, DUAL CEMENT and OPTEC BOND revealed no statitically important differences comparing with optical density of negative control.(P>0.05) 5. CR INLAY CEMENT showed a tendency of increaing cytotoxicity with days and DUAL CEMENT and OPTEC BOND showed higher cytotoxicity in 2 days than in 4 days, but there was no statistical importance in the differences.(P>0.05).

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.618-629
• /
• 1998

CAD/CAM-fabricated ceramic restorations nowadays are used as alternatives of amlagam and posterior composite resin restorations, especially in the cases of inlay restorations. But the reported results on marginal and internal fit of CAD/CAM-fabricated ceramic inlay have showed considerable difference. In this study, to evaluate the marginal and internal fit of CEREC2-fabricated ceramic inlay restoration and to compare with the fit of gold inlay and amalgam restoration, standardized Class II MO cavities were prepared in forty extracted caries-free human premolars. The teeth with prepared cavities were divided into 4 groups of ten teeth each. In group 1, CEREC2-fabricated ceramic inlays were treated with Scotchbond Multi-Purpose Plus(SMP plus) and cemented with Scotchbond Resin Cement. In group 2, casted gold inlays were cemented in the same method as in group 1. In group 3, casted gold inlays were cemented with zinc-phosphate cement. And in group 4, the prepared cavities were restored with amalgam. Restored teeth were thermocycled, stored in 1% methylene blue for 24 hours, and sectioned faciolingually and mesiodistally using EXAKT. Sectioned surfaces were observed with stereomicroscope and the gaps were measured at 9 points of mesiodistally sectioned surface and 7 points of faciolingually sectioned surface. The measured data were treated by Kruskal-Wallis one way ANOVA and Student-Newman-Keuls test. 1. The differences among measured gaps at each points were statistically significant for 4 experimental groups (P<0.05). 2. There were statistically significant differences in the measured gaps at each points between group 1 and group 2, group 1 and group 3, group 1 and group 4, group 2 and group 4, and group 3 and group 4 (P<0.05). 3. There were not statistically significant differences in the measured gaps at each points between group 2 and group 3 (P>0.05). 4. In the cases of inlay restorations(group 1, group 2, group 3), the gaps at internal line angle(distopulpal, axiogingival, faciopulpal, linguopulpal line angle) had a tendency to increase. In the cases of amalgam restorations(group 4), the gaps at occlusal margin, gingival margin and axiogingival line angle were greater than those at the other parts of cavities. 5. In CEREC2-fabricated ceramic inlays which were treated with Scotchbond Multi-Purpose Plus and cemented with Scotchbond Resin Cement, the mean gaps were $111{\mu}m$ at cavity margins, $168{\mu}m$ at vertical walls of cavities, $225{\mu}m$ at internal line angles and $123{\mu}m$ at cavity floors.

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.619-627
• /
• 1996

There are increasing use of composite resin in the posterior teeth and the new indirect inlay technique was introduced for compensating much troubles faced in direct technique. Many researchers insisted that overall properties of restorative materials were enhanced by an additional curing but this technique still has a problems about using cement material. Resin inlay obtains retention force from friction and another adhesion to tooth structure. A shape of cavity preparation was noted but studies about cement thickness and bond strength with cavity divergency are rare. The purpose of this study is to assess the effect of cavity divergency on cement thickness and bond strength of resin inlay. Cavities, which divergency was $6^{\circ}$, $16^{\circ}$, and $26^{\circ}$ in each group, were prepared and their divergency was verified by Adobe Photoshop program through the image capture with stereo microscope and FlexCam. Inlays were fixed into the cavities with a resin cement, Superbond and were handled under chemical (in 75% ethanol for 24 hrs.) and thermal stress (500 cycles from $5^{\circ}$ to $55^{\circ}C$). MXT 70 (x400) was used for measuring the cement thickness and bond strength was evaluated with a universal testing machine. Following results were obtained : 1. The cement thickness in Mean (S.D.) were; 35.58 (10.31)${\mu}m$ in $6^{\circ}$ group, 35.97 (10.49)${\mu}m$ in $16^{\circ}$ group, and 41.43 (9.33)${\mu}m$ in $26^{\circ}$ group. But there was no significant difference between groups. 2. The bond strength in Mean (S.D.) were ; 33.18 (5.53)kg in $6^{\circ}$ group, 23.47 (13.40)kg in $16^{\circ}$ group, and 19.75 (10.48)kg in $26^{\circ}$ group. $6^{\circ}$ group showed significantly higher value compared to $16^{\circ}$ and $26^{\circ}$ groups (p<0.05). Although the results of this study indicate $6^{\circ}$ divergency will be good for resin inlay, cavity preparation with this type will have lots of difficulties in manufacturing, try-in, and cementation procedures, such as deformation. So it is concluded that $16^{\circ}$ divergent cavity preparation is recommended in resin inlay technique.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.594-594
• /
• 2001

Increased demand for esthetic restorations has promoted a growing interest in tooth-colored restorations even in the posterior regions. Preparation for specific types of indirect inlay and onlays may vary because of differences in fabrication steps for each commercial system and variations in the physical properties of the restorative materials. Preparations for indirect inlay/onlay basically are meant to provide adequate thickness for restorative material and at the same time a passive insertion pattern with rounded internal angles and well defined margins after deciding what type of restoration is indicated.(omitted)