• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.750-753
• /
• 2002

At present, almost circuits are wired using copper in flexible circuits. But, these circuit have limit to flexibility so it occurs fracture about cyclic bending and, thermal load of bending stress occur a circuit trouble. a study of all-polymer flexible circuits get over that problem. Established fabrication method of all-polymer circuits is photolithograph. This method can not have mass production, so this method wastes time and human effort. In this study, all polymer flexible circuits are fabricated using the inkjet process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.787-790
• /
• 2006

This paper analyzes the principle and feature of the piezoelectric ceramic print head for the image printing of industrial inkjet plotter, and apply the Drop-on-Demand method that can adjust an ink drop size in accordance with the certain time adjustment. In order to do this study, drive frequency is selected at maximum 8.3[kHz] which can be operated within resonance frequency range of the piezoelectric ceramic. Drop controlling was realized according to pulse waveform the drive voltage, and grey-scale and satellite diminution method were applied for printing of high resolution image. A feasibility study of the result will be demonstrated by constructing the experiment equipment.

• 전기학회논문지
• /
• 제56권8호
• /
• pp.1441-1444
• /
• 2007

This paper presents a novel electrostatic drop-an-demand ejector with a conductive pole inside nozzle. The MEMS fabricated pole-type nozzle shows a significant improvement in the performance and reliability of forming meniscus and generating a micro dripping mode of droplet out of the meniscus. It is verified experimentally that the use of the pole-type nozzle. The liquid is used D20+SDS+SWNT (5 %wt). The gap between upper electrode and nozzle is about 600 um. Electrostatic drop-an-demand ejection is observed when a DC voltage of 1.5 kV is applied between the control electrode and ground electrode. Droplet diameter is $100{\mu}m$.

• 센서학회지
• /
• 제33권1호
• /
• pp.24-29
• /
• 2024

Inkjet printing technology is used to mass-produce displays and electrochemical sensors by dropping tens of pico-liters or less of specific-purpose ink through nozzles, just as ink is sprayed and printed on paper. Unlike the deposition method for vaporizing material in a vacuum, inkjet printing technology can be used for processing even under general atmospheric pressure and has a cost advantage because the material is dissolved in a solvent and used in the form of ink. In addition, because it can only be printed on the desired part, masks are not required. However, a technical shortcoming is the difficulty for commercialization, such as uniformity for forming the thickness and coffee ring effect. As sizes of devices decrease, the need to print electrodes with precision, thinness, and uniformity increases. In this study, we improved the printing and processing conditions to form a homogeneous electrode using Ag ink (DGP-45LT-15C) and applied this for patterning to fabricate a heat sensor. Upon the application of voltage to the heat sensor, the model with an extended width exhibited superior heat performance. However, in terms of sheet resistance, the model yielded an equivalent value of 21.6 Ω/□ compared to the ITO.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.585-586
• /
• 2006

In this paper, we present a design, analysis, fabrication and performance test of the novel DoD metal-jet system for application to the high-density and high-temperature-melting materials. Based on the theoretical analysis, we design the metal-jet print head system and fabricate the metal-jet system, which can eject the droplet of lead-free metal solder in the high-temperature. In the experimental test, we set up the test apparatus for visualization of the droplet ejection and measure the Ejected droplet volume and velocity. As a result, the diameter, volume and the velocity of the ejected droplet are about $65-70{\mu}m$, 145-180 pl and 4m/sec. We also fabricate vertical and inclined 3D micro column structures using the present molten metal inkjet system. The measured geometries of the micro column structures are about height of $2,100{\mu}m$, diameter of $200{\mu}m$ and aspect ratio of 10.5 for vertical micro column and $1,400{\mu}m$ of height and $150{\mu}m$ of diameter for $65^{\circ}$-inclined micro column, respectively.

• 패션비즈니스
• /
• 제21권3호
• /
• pp.14-28
• /
• 2017

This purpose of this study to analyze effect material properties have on change in QR code recognition rate according to change of materials by comparing recognition rate of color QR code. QR code applied to textile materials has the advantage of being washable and being applicable to lost child prevention goods or clothes or a person with dementia through record of information relating to the material or input of additional information, differently from QR code printed on the conventional paper. An effective method of entering QR code in textile materials is Digital Textile Printing(DTP), that facilitates printing by rapidly applying diverse information, and small quantity production. It is possible to tailor various QR codes according to use. Regarding samples to use, cotton material used in clothing products and Tyvek material recently applied to clothing and related products were selected. Reactive dyes were used for cotton, pigment was used for Tyvek, and QR code was printed with an inkjet printer by direct printing method. Printing methods and surface textures are different between cotton and Tyvek. It was revealed that consequent print results and results of recognition rate were different. Regarding color to be printed, 2015 S/S - 2017 S/S color presented by Pantone was used. Color combination affected recognition rate of color QR code. Understanding color combination, material properties and print characteristics may be helpful in increasing recognition rate of color QR code, and may contribute to usability of color QR code applied to textile materials in the future.

• 펄프종이기술
• /
• 제37권2호
• /
• pp.38-46
• /
• 2005

Experimental work was carried out in order to produce a novel grade of ink-jet paper that has both high print-out quality and price competitiveness. Usually, silica and PVOH has been used for ink-jet paper to design the coating layer that has a hydrophilic and micro-porous structure. However, poor rheological characteristics and low productivity of the silica-PVOH system make the price of the ink-jet paper high. The main focus of this study was replacing the conventional silica (coating pigment) PVOH (binder) coating system with the new PCC (coating pigment) cationic starch (binder) coating system, and optimizing thecoating technology associated with PPC-cationic starch system. In this study, ink-jet print quality of PCC-coated papers was compared with that of silica-coated paper. Two types of PCC were used: conventional type and colloid type. It turned out that PCC C, a conventional coating pigment, has not given a desirable result: it showed high dot reproduction, but it gave low optical density. In spite of low dot reproduction, the qualities of PCC A were comparable or superior to those of silica in optical density, color reproduction, and the uniformity of printing surface. It was also shown that the problems that are happened when the dosage level of cationic starch was too low were varied with ink-type used in each printer. However, in the case of low binder level, the produced image was widely spread resulting fromtoo low optical density of images, or from the lack of bonding ability to set ink into coating surface.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1326-1327
• /
• 2011

결정질 태양전지 제작 시 실리콘 기판 표면의 전극형성은 주로 스크린 프린트를 이용하여 형성되고 있다. 이는 squeeze 와 실리콘 기판과의 직접 접촉으로 인하여 기판의 파손이 야기 될 수 있으며, 보다 미세한 전극 형성이 어려운 단점이 있다. 본 연구에서는 비접촉식 잉크젯 프린팅을 이용한 태양전지의 전극형성에 관하여 기술하였으며, 고효율 태양전지를 제작하기 위해 레이저를 이용한 grooving 형성과 전극의 패턴에 따른 반사방지막층 제거를 통하여 Buried contact cell 제작을 연구하였다. 이를 통해 전극의 선 폭을 $45{\mu}m$로 구현하였으며, 나노 크기의 입자 형태를 띤 Ag 잉크를 이용하여 인쇄하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.49-52
• /
• 2007

본 논문에서는 FEM (Finite Element Method)을 이용한 압전세라믹의 특성해석을 통하여 잉크젯 프린트헤드를 설계, 제작하였다. 압전세라믹의 물질 특성과 잉크유체 특성을 고려한 굽힘 모드방식의 구동원리와 이론정립을 하였다. 압전방정식은 압전구조에 의한 공진주파수로 압전 파라미터를 구할 수 있고, 실험을 통하여 이러한 측정값을 얻을 수 있었다. 제작된 압전세라믹 프린트헤드의 잉크드롭 실험결과 통하여 이에 대한 특성을 알 수 있었다. 이때 잉크유체의 음파와 압전 공진주파수 범위 내에서 압전세라믹 응력(변형)의 이득을 발생할 수 있음을 제작한 128노즐의 압전세라믹 잉크젯 프린트헤드로부터 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1119-1121
• /
• 2006

Using a chemical radical we modified the surface property of PET substrates. The chemically treated substrate surface improved dispersion of CNTs on substrate and provides suitable adhesion of CNTs to substrate. In addition, an ink-jet printed patterning technique effectively improved the transparency of transparent conductive CNT composite films.