• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1525_1526
• /
• 2009

In this paper, we have studied the bulging phenomenon of ink-jet printed silver lines. The used silver inks are DGP-40LT-15C and DGH-55HTG of Advanced Nano Product (ANP) Company. We investigated the behavior of bulging by changing the polarity of the inks, the surface energy of substrate and droplet spacing in printing. The contact angle of the polar inks increased much more sensitively than the nonpolar ink as the surface energy of the substrate increases. In the case of the nonpolar ink, the bulging phenomenon occurred seriously as the droplet spacing decreased at the constant surface energy.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.15-21
• /
• 2006

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.33-38
• /
• 2006

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.1
• /
• pp.20-26
• /
• 2015

Ceramic ink-jet printing technology in art tiles, decorated tablewares and other porcelain products has many advantages of fast and precision printing of various images with high efficiency and low cost. For the application to ink-jet printing, ceramic ink requires a stable dispersibility with nano-sized pigments. In this paper, characteristics of pink-red aqueous ceramic ink for ink-jet printing was demonstrated. $CaCr_{0.1}Sn_{0.8}SiO_5$ pigment was synthesized using solid state reaction and deagglomerated using attrition milling. The aqueous ceramic ink contains 10 wt% of the obtained $CaCr_{0.1}Sn_{0.8}SiO_5$ nanopigment with 0.4 wt% of sodium dodecyl sulfate (SDS) as a dispersion agent. Viscosity of $CaCr_{0.1}Sn_{0.8}SiO_5$ aqueous ceramic ink was adjusted using 0.18 wt% of polyvinyl alcohol (PVA) for a suitable jetting from the nozzle. The prepared pink-red ceramic ink showed a good jetting property with formation of a single sphere-shaped droplet after $180{\mu}s$ without a tail and satellite droplet.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1312-1314
• /
• 2007

The effect of gate insulator surface treatment on electrical characteristics of bottom contact (BC) and suspended source/drain (SSD) organic thinfilm transistors (OTFTs) was studied. Triisopropylsilylethynyl pentacene was used as an active material and was printed by ink-jet printing method. In case of the BC OTFTs, threshold voltage was shifted from positive to near zero, and the fieldeffect mobility was increased when the gate insulator surface was treated with hexamethyldisilazane. However, in case of SSD OTFT, threshold voltage shift was not observed and the field-effect mobility was decreased.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1274-1274
• /
• 2008

In this report, the effect of substrate temperature on the electrical properties of ink-jet printed triisopropylsilyl (TIPS) pentacene organic thin-film transistors (OTFTs) has been investigated. The electrical properties such as mobility and on/off ratio were decreased as the substrate was heated above room temperature. The field-effect mobility of decreased from $10^{-2}cm^2/Vs$ to $10^{-5}cm^2/Vs$ and the on/off ratio decreased from $10^6$ to $10^4$ when the substrate temperature was heated from room temperature to 60$^{\circ}C$.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.2 s.110
• /
• pp.38-46
• /
• 2005

Experimental work was carried out in order to produce a novel grade of ink-jet paper that has both high print-out quality and price competitiveness. Usually, silica and PVOH has been used for ink-jet paper to design the coating layer that has a hydrophilic and micro-porous structure. However, poor rheological characteristics and low productivity of the silica-PVOH system make the price of the ink-jet paper high. The main focus of this study was replacing the conventional silica (coating pigment) PVOH (binder) coating system with the new PCC (coating pigment) cationic starch (binder) coating system, and optimizing thecoating technology associated with PPC-cationic starch system. In this study, ink-jet print quality of PCC-coated papers was compared with that of silica-coated paper. Two types of PCC were used: conventional type and colloid type. It turned out that PCC C, a conventional coating pigment, has not given a desirable result: it showed high dot reproduction, but it gave low optical density. In spite of low dot reproduction, the qualities of PCC A were comparable or superior to those of silica in optical density, color reproduction, and the uniformity of printing surface. It was also shown that the problems that are happened when the dosage level of cationic starch was too low were varied with ink-type used in each printer. However, in the case of low binder level, the produced image was widely spread resulting fromtoo low optical density of images, or from the lack of bonding ability to set ink into coating surface.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1126-1129
• /
• 2006

Here we developed a conductive ink which contains silver nanoparticles from which the electrodes for organic thin film transistor were directly patterned by ink-jet printing. To fabricate a coplanar type OTFT, solution processable semiconducting oligomer, ${\alpha},{\omega}-dihexylquaterthiophene$ (DH4T) was drop-cast onto between the ink-jet printed silver electrodes and I-V characteristics were measured.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.9
• /
• pp.787-792
• /
• 2015

Recently, 3D printing technology is a hot issue in various industrial fields. According to the user's application, it allows for the free form fabrication method to be utilized in a wide range. The powder based fusion technique is one of the 3D printing methods. When using this method it is possible to apply the various binder jetting techniques such as piezo, thermal bubble jet, dispenser and so on. In this paper, a multi thermal bubble ink jet was integrated for jetting of powder binding material and developing a power fused 3D printing system. For high quality 3D printing parts, it needs an analysis and evaluation of the behavior of the thermal bubble ink jet head. In the experiment, a correlation between jetting binder quantity and layer thickness of powder was investigated, and a 3D part model was fabricated, which was used by measuring the scale factor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.141-143
• /
• 2002

Litrex Ink Jet equipment offers prospect for reliable and low cost manufacturing process for PLED technology. The design concept of 140P system that we are developing meets requirement of process/equipment for PLED manufacturing line in terms of higher mechanical accuracy, in-line monitoring system of print head, high precision of process capability, reasonable through-put, high reliability/easier maintenance and no particle generation.