• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2008년도 춘계학술발표대회 및 제14회 신소재 심포지엄
• /
• pp.17.2-17.2
• /
• 2008

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.451-454
• /
• 2007

This paper presents the pattern characteristic using the electrostatic drop-on-demand ink-jet printing system. In order to achieve the pattern characteristic of electrostatic inkjet printing, the capillary inkjet head system is fabricated using capillary tube, Pt wire and electrode, and is packaged by acrylic board for the accurate alignment between wire and electrode-hole. The applied DC voltage of 1.4 $\sim$ 2.0 kV used for the observation of electrostatic droplet ejection. Electrostatic droplet ejection is directly observed using a high-speed camera. For investigated pattern characteristic, conductive inkjet silver ink used. The higher voltage has a good condition which has micro dripping mode. Also, the droplet size decreases with increasing the supplied DC voltage. This paper shows the pattern which is formed by about 300um. Also, capillary inkjet head system will be applied industrial area comparing conventional electrostatic inkjet head system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.654-656
• /
• 2008

We enhanced the conductivity of PEDOT-PSS by mixing with glycerol and fabricated the low contact resistance of source and drain[S/D] electrodes of OTFT with PEDOT-PSS by ink-jetting printing. The contact resistance was much smaller by seven times than Au with $200k{\Omega}$ at $V_G=-5V$. For the bottom contacted OTFTs, the performance was comparable to OTFTs with Au electrodes with the field effect mobility of $0.2\;cm^2/V s$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.270-273
• /
• 2006

In this study, ink-jet technology is applied to the emitter fabrication for surface-conduction electron-emitter display (SED). The general emiiter material of SED, palladium oxide (PdO), is prepared by calcination the mixture of solvent and precursors of platinum chlorine and platinum nitrate. With controlling the precursors and solvents, the PdO is formed below $400^{\circ}C$ which is required for SED process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.724-726
• /
• 2007

We have developed the synthesis method to reduce the surface oxide layer in Cu nanoparticle, which is based on controlling the molecular weight of capping polymer. In addition, we demonstrated how the variation of oxide layer thickness influences the resistivity of conductive Cu film.

• Macromolecular Research
• /
• 제16권2호
• /
• pp.149-154
• /
• 2008

UV-curable electrolytes inks were prepared by dissolving [2-[(methacryloyloxy)ethyl]dimethyl]propylaminium bromide (MEPAB), 1,5-[bis(2-methacryloxyethyl)dimethyl ammono]penthane dibromide (MDAPD), hexafunctional reactive oligomer (SP1013), trimethylolpropane triacrylate (TMPTA) and a photoinitiator in methanol/2-methoxyethanol. The compositions of the electrolyte inks were MEPAB/MDAPD/SP1013/TMPTA=6/24/17.2/12.8, 15/15/17.2/12.8 and 24/6/17.2/12.8. Humid-membranes were deposited on a gold electrode/alumina electrode using an ink-jet printer equipped with a UV lamp followed by immediate UV curing. The humidity-sensing characteristics including hysteresis, frequency and temperature dependence, response time and water durability were estimated.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.788-791
• /
• 2004

입자크기가 수 nm인 고농도 은 나노 졸을 이용하여 잉크젯 기법으로 은 미세라인을 형성하고자 하였다. 고분자전해질을 사용하여 합성한 $10wt\%$ 농도의 은 나노 졸의 입자크기는 10nm 이하였으며, 은 나노 졸을 이용한 미세 라인의 인쇄특성은 은 나노 졸의 접촉각에 매우 깊은 관계를 갖고 있었다. 순수한 ITO 기판에서 은 나노 졸은 높은 접촉각을 나타내었으며, dot 형상이 나타났다. 그러나 100ppm의 Polyethylenimine(PEI)을 코팅한 ITO 기판은 젖음성이 크게 개선되었으며, 잉크젯 기법을 이용하여 $60\~100{\mu}m$의 선폭을 갖는 은 나노 졸의 미세라인 형성이 가능함을 확인할 수 있었다.

• 한국표면공학회지
• /
• 제40권4호
• /
• pp.190-196
• /
• 2007

Dye sensitized solar cells(DSSC) are the most promising future energy resource due to their high energy efficiency, low production cost, and simple manufacturing process. But one problem in DSSC is short life time compared to silicon solar cells. This problem occurred from photocatalytic degradation of dye material by nanometer sized $TiO_2$ particles. To prevent dye degradation as well as to increase its life time, the transparent coating film is needed for UV blocking. In this study, we synthesized nanometer sized $TiO_2$ particles in sols by increasing its internal pressure up to 200 bar in autoclave at $120^{\circ}C$ for 10 hrs. The synthesized $TiO_2$ sols were all formed with brookite phase and their particle size was several nm to 30 nm. Synthesized $TiO_2$ sols were coated on the backside of fluorine doped tin oxide(FTO) glass by ink jet printing method. With increasing coating thickness by repeated ink jet coating, the absorbance of UV region (under 400 nm) also increases reasonably. Decomposition test of titania powders dispersed in 0.1 mM amaranth solution covered with $TiO_2$ coating glass shows more stable dye properties under UV irradiation, compared to that with as-received FTO glass.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2509-2512
• /
• 2005

In this paper, a position control scheme of the ink droplet is presented for the high image quality and print speed inkjet printer. The proposed scheme estimates the impact position and compensates it by control of the fire strobe time based on the dynamic equations describing the moving trajectory of the ink droplet. Compared to the conventional fire strobe control which is based on the simple synchronization the fire strobe with the position signal of the inkjet nozzle, the proposed control scheme provides more accurate impact position control during the carrier is moving with accelerated or decelerated speed as well as constant speed. The availability of printing during the acceleration and deceleration states of the carrier moving enables the print speed up and the frame size down which means the cost down.

• 반도체디스플레이기술학회지
• /
• 제4권2호
• /
• pp.21-24
• /
• 2005

Ink-jetting characteristics of pulse width and pulse amplitude for a piezoelectric ink jet printer driver have been mapped with various polymer EL ink. In this study, the jetting characteristics have been classified into 4 regime; no Jetting, unstable jetting, stable jetting, and spraying, and the importance of fluid viscosity on the scope of the stable jetting regime has been emphasized. The relation between jetting speed and the width and amplitude of driving signal has also been investigated and the effect of the speed on the jetting characteristics has been discussed.