• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.1
• /
• pp.17-30
• /
• 1997

In this work, we have investigated the printability such as print through and str-off of domestic newspapers. Nine kinds of domestic newspapers Hansol, Deahan, Sinho, Hanla and Sepung, were tested by IGT printability tester, and studied using maximum ink requirement method. We obtained the datum of printability parameters such as maximum ink requirment of paper Ymax, printing density D, print through, set-off and gloss. The results of this test showed that a choice of the fillers on the newspaper had an effect on print through, set-off and density of newspapers in the maximum ink transfer point.

• Textile Coloration and Finishing
• /
• v.25 no.4
• /
• pp.287-291
• /
• 2013

Nowadays, terms such as 'Smart Textile', 'Intelligent Textile' and 'Wearable Computing' are commonly used in everyday contexts. And radio-frequency identification (RFID) is the use of a wireless non-contact system that uses radio-frequency electromagnetic fields to transfer data from a tag attached to an object, for the purposes of automatic identification and tracking. These products are required technologies which are textile treatments, printing, ink, etc. Durability of textile substrates is an essential marker for conductive ink printing process. Especially, heat stability is important, since conductive ink should be processable (annealing, curing) at temperatures below $150^{\circ}C$. This study was application of RFID on textiles. The textile pre-treatment processes should be carried out to use RFID antenna on textiles.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.961-962
• /
• 2008

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.85-93
• /
• 2007

The printed mottle is recognized as the most common printing problems in using coated paper and one of the most difficult problems to solve in offset printing. Printed mottle is caused by an uneven penetration of ink into the paper and binder migration. The prevention of printed mottle requires of coating color formation, especially the minimum of binder migration. Printing worked by interaction of printing ink, coated paper and printing pressure. In this study, we investigated the effect of the properties changing of coated paper and printing conditions such as ink dispersion, nip condition and amount of ink transfer.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.2 s.120
• /
• pp.31-37
• /
• 2007

Lithography like off-set printing is processed using the repellent properties between water and oil, so all inks for off-printing must work with dampening solution(water). The dampening water may cause the emulsification of ink by the printing pressure in the printing nip. This study aimed to investigate the effect of emulsified inks on print mottle. The cyan ink was emulsified artificially with the different IPA(isopropyl alcohol) content in this study. We evaluated the print mottle by densitometer and image analysis method. The print mottle phenomenon was directly affected by IPA content. The emulsification of inks also had an influence on flow properties of inks and it increased ink transfer rate. It, however, caused low ink density. Moreover the emulsified inks were spreaded to around dots and cause the thinning density on the non-printing area like print mottle. The trial printing showed that the emulsified inks also cause scumming on the printing result with little mistake of adjusting dampening solution and mostly decreasing dot reproduction. We could, therefore, find out the obvious effect of emulsified inks on print mottle.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.2
• /
• pp.61-68
• /
• 2006

Rubber rollers in off-set printing process are one of the most important factor, transferring the ink and water to the plate. Each different roughness of roller surface and different rubber compounds could effect to ink transparency and printability. Three different rubber compounds (NBR, EPDM, PU) and each different roughness of roller surface would show us different result of ink transparency and density of actual printing result. There might be a differences from actual printing result not only the amount of transferred ink, but there is also some other point we should check it out. According to the result of this studies, we found that different rubber compounds and their surface roughness directly effect to the rate of ink transfer. It also shows that the amount of transferred ink is not even and stable amount what we expect to get optimum printability. To reach a targeted printability with rollers, firstly it is necessary to choose correct rubber compounds with certain purpose and the roughness of roller surface has to be as smooth as less than $5{\mu}m{\sim}7{\mu}m$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.7-14
• /
• 2010

This paper describes the effects of kinetic parameters such as attaching speed, attaching time, and dettaching speed on printing property of electrodes which were fabricated by micro-contact printing with Ag ink. In inking process the attaching speed was preferable to be less than 1 mm/s, attaching time as short as possible, and detaching speed larger than 1000 mm/s in order to obtain the transfer ratio of ink larger than 98%. Meanwhile in printing process the parameters were totally opposite to the results of inking process; attaching speed larger than 100 mm/s, attaching time larger than 30 sec, and detaching speed less than 1 mm/s for the best results. With the parameters we could obtain the micro-contact printed electrodes with the minimum line width of $30\;{\mu}m$, thickness of 300~500 nm, roughness less than 50 nm, and resistivity of about $15{\sim}16{\mu\Omega\cdot}cm$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3454-3459
• /
• 2013

Sumi-e is one of the art work that uses not only ink line but also color painting. This technique is well known as a representative Asian painting style and widely used in movie, advertisement poster and various effect in camera device. In this paper, we propose an algorithm that can generate result image with Sumi-e effects of example image based on computer graphics and image processing techniques. For this, we pass two steps. The first is painting expression step. We used texture transfer technique to generate result with texture effect of reference image by analyzing numerically. The second step is ink-painting effect generation step. We express ink-painting effect in outline by considering intensity variation in edge of example image. Our algorithm can express various Sumi-e style based on selected reference image. So it can be utilized to various contents generating research.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.1 s.113
• /
• pp.27-33
• /
• 2006

Newsprint is quantitatively the most important printing paper. The demands for its printability are continuously increasing. It is well known that the relationship between the physically tested paper properties and newspaper printability is unsatisfactory. In order to improve the printing quality of Korean newsprint, the printability coefficients such as maximum ink requirement(Ymax), print through were investigated. Kinds of newspapers and black printing ink were tested by IGT printability tester. Experiment condition of IGT printability tester was 14 steps between $0.2{\sim}2.8g/m^2$ of ink requirement, printing pressure was 200 N and printing velocity was 1 m/sec. The properties of newspaper samples (basis weight, bulk density, roughness, smoothness, porosity, i. e.) were examined in accordance with KS and TAPPI standard testing methods. The result of this study are respected for usefulness printing quality management of Korean newsprint.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.2
• /
• pp.1-13
• /
• 2008

Printed mottle of coated paper is one of the most common phenomenon and the most difficult problem in offset printing. Offset printing is processed mainly processed by the attractive properties between water and oil, so all inks for off-printing must work with dampening solution(water). It may cause the emulsion on the printing nip from the printing pressure. This study aimed to investigate the effect of emulsified inks on print mottle from emulsified cyan ink by force with each different IP A contents. We measured the print mottle by densitometer and image analysis method. The emulsified inks also give effect to now properties of inks and it caused more ink transfer rate, however, it caused low density of inks. Moreover the emulsified inks were spreaded to around of dots and cause the thinning density on the non-printing area like print mottle. The results showed that the emulsified inks also cause scumming on the printing result with little mistake of adjusting dampening solution and mostly decreasing dot reproduction. So we could find out the obvious effect of emulsified inks to print mottle.