• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.464-464
• /
• 2011

We report a method to fabricate a large-area metal nanowire-grid polarizer. Liquid-bridge-mediated nanotransfer molding (LB-nTM) is based on the direct transfer of metal nanowires from a mold to a transparent substrate via liquid layer. A metal particle solution is used as an ink in the LB-nTM, which can be used for the formation of metal nanowires. The nanowires have higher depth are preferred for high transmittance. The height of nanowires that we made is about 140 nm. Large-area WGP is fabricated with good average transmittance of 74.89% in our measuring range.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.637-637
• /
• 2013

We develop single-crystal poly(3,4-ethylenedioxythiopene nanowires using liquid-bridge-mediated nanotransfer printing via vapor phase polymerization. This direct printing method can simultaneously enable the synthesis, alignment and patterning of the nanowires from molecular ink solutions. Twoor three-dimensional complex structures of various single-crystal organic nanowires were directly fabricated over a large area using many types of molecular inks. This method is capable of generating several optoelectronic devices. LB-nTM is based on the direct transfer of various materials from a mold to a substrate via a liquid bridge between them. To demonstrate its usefulness, we used LB-nTM to fabricate nanowire field-effect transistors and arrays of 6,13-bis (triisopropyl- silylethynyl) pentacene (TIPS-PEN) nanowire field-effect transistors.

• 한국정밀공학회지
• /
• 제25권5호
• /
• pp.96-102
• /
• 2008

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology, with low cost and high productivity, can make it possible to produce printed electronics such as TFT, solar cell, RFID Tag, printed battery, and so on. In this study, apparatus of gravure-offset printing are developed for fine line-width/gap printing and the results obtained from the apparatus shows that it is possible to make around 20 micro-meter line-width/gap printing patterns. The roll-to-roll printing system for fine line-width printing based on primary experiment is presented. The printing results obtained from the system shows around 30 micro-meter line-width/gap printing patterns.

• Current Photovoltaic Research
• /
• 제2권4호
• /
• pp.173-176
• /
• 2014

We have investigated the seed layer formation of front side contact using the inkjet printing process. Conductive silver ink was printed on textured Si wafers with 80 nm thick $SiN_x$ anti reflection coating (ARC) layers and thickened by light induced plating (LIP). The inkjet printable sliver inks were specifically formulated for inkjet printing on these substrates. Also, a novel method to prepare nano-sized glass frits by the sol-gel process with particle sizes around 5 nm is presented. Furthermore, dispersion stability of the formulated ink was measured using a Turbiscan. By implementing these glass frits, it was found that a continuous and uniform seed layer with a line width of $40{\mu}m$ could be formed by a inkjet printing process. We also investigated the contact resistance between the front contact and emitter using the transfer length model (TLM). On an emitter with the sheet resistance of $60{\Omega}/sq$, a specific contact resistance (${\rho}_c$) below $10m{\Omega}{\cdot}cm^2$ could be achieved at a peak firing temperature around $700^{\circ}C$. In addition, the correlation between the contact resistance and interface microstructures were studied using scanning electron microscopy (SEM). We found that the added glass particles act as a very effective fire through agent, and Ag crystallites are formed along the interface glass layer.

• 한국전문물리치료학회지
• /
• 제2권2호
• /
• pp.9-23
• /
• 1995

The objective of this study was to identify the effects of weight-transfer training on the weight bearing distribution and gait patterns of hemiplegic patients through visual and auditory feedback using a limb load monitor. The subjects of this study were 18 hemiplegic patients who had been hospitalized or were visited out-patient department of the Rehabilitation Hospital, College of Medicine, Yonsei University, from January 5, 1995 through March 15, 1995. Pre-and post-training changes in gait patterns were measured using ink foot prints as well as by recording weight bearing distribution using a limb load monitor. The data were analyzed by the repeated measure one-way ANOVA and paired t-test. The finding were as follows: 1. Prior to the training, 18 subjects bore more weight on the sound leg(61.6 %) than on the affected leg(38.4 %). 2. Posterior to the training, the average percentage of weight bearing on the affected leg increased significantly from 38.4 % prior to training; to 46.0 % immediately after training; 45.7 % after a 30 second delay; and 45.3 % after a 60 second 3. The difference in gait patterns between pre- and post- training was statistically significant, with an increase in gait velocity to 3.65 cm/sec post-training; an increase in stride length to 5.37 cm on the affected side; 4.77 cm on the sound side; and a narrowing of the base of support to 1.19 cm. In conclusion, hemiplegic weight-transfer training using visual and auditory feedback with a limb load monitor was found to be enhancing symmetrical standing posture, and simultaneously improve gait patterns.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.669-675
• /
• 2008

카본블랙은 토너수지, 잉크 및 복합재료 등에 광범위하게 산업적으로 응용되고 있다. 본 연구에서는 분산 안정성을 증대시키기 위하여 카본블랙을 상 이동 촉매(phase transfer catalyst)를 이용한 상온에서의 산화반응을 통하여 카본블랙(CB)-수산화기(OH)를 제조하여 이에, silane coupling-agent인 p-methylacryloxypropyltrimethoxysilane를 grafting시켜 말단에 이중결합을 가진 구조를 도입하였다. 이렇게 표면개질된 카본블랙을 미니유화중합법을 이용하여 고분자로 캡슐화를 진행하였다. 이러한 과정을 통하여 평균직경 100~500 nm 크기의 하이브리드 미립자를 제조하였다. 중합과정에 있어서 카본블랙의 표면 개질의 영향, 모노머의 종류, 개시제 및 유화제의 캡슐화 반응에 미치는 영향을 연구하였다.

• Tribology and Lubricants
• /
• 제32권3호
• /
• pp.75-81
• /
• 2016

Future electronics such as electronic paper and foldable cellphone are required to be flexible and transparent and should have a high performance. In order to fabricate the flexible electronics using flexibility transfer process, techniques for transferring various devices from rigid substrate onto flexible substrate by elastomeric stamp, have been developed. Adhesion between the elastomeric stamp and various devices is crucial for successful transfer process. The adhesion can be controlled by the thickness of the stamp, separation velocity, contact load, and stamp surface treatment. In this study, we fabricated the bump shape stamp consisting of a UV-curable polymer and investigated the effects of curing condition, separation velocity, and contact load on the adhesion characteristics of bumps. The bumps with hemispherical shape were fabricated using a dispensing process, which is one of the ink-jet printing techniques. Curing conditions of the bumps were controlled by the amount of UV irradiation energy. The adhesion characteristics of bumps are evaluated by adhesion test. The results show that the pull-off forces of bumps were increased and decreased as UV irradiation energy increased. For UV irradiation energies of 300 and 500 mJ/cm², the pull-off forces were increased as the separation velocity increased. The pull-off forces also increased with the increase of contact load. In the case of UV irradiation energy above 600 mJ/cm², however, the pull-off forces were not changed. Therefore, we believe that the bump shape stamp can be applied to roll-based transfer process and selective transfer process as an elastomeric stamp.

• 한국레이저가공학회지
• /
• 제17권4호
• /
• pp.20-23
• /
• 2014

In printed electronics, printing rolls are used to transfer electronic ink onto a flexible substrate. Generally printing rolls are patterned in microscale by the indirect laser method. Since based on the wet etch process, the indirect method is neither environment-friendly nor suitable for making a printing roll with patterns narrower than $20{\mu}m$. In this paper, we have directly engraved micro-patterns into a Zn-coated metal specimens using a picosecond laser in order both to engrave $10{\mu}m$-wide patterns and to improve the pattern profile. Experiments showed that it is possible to engrave $10{\mu}m$-wide patterns with an a rectangular-shaped profile which is necessary for the dimensionally accurate printing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.155-158
• /
• 2007

Printed organic thin-film transistor(OTFT) to use as a switching device for an organic light emitting diode(OLED) were fabricated in the microcontact printing and direct printing processes at room temperature. The gate electrodes($5{\mu}m$, $10{\mu}m$, and $20{\mu}m$) of OTFT was fabricated using microcontact printing process, and source/drain electrodes ($W/L=500{\mu}m/5{\mu}m$, $500{\mu}m/10{\mu}m$, and $500{\mu}m/20{\mu}m$) was fabricated using direct printing process with hard poly(dimethylsiloxane)(h-PDMS) stamp. Printed OTFT with dielectric layer was formed using special coating system and organic semiconductor layer was ink-jet printing process. Microcontact printing and direct printing processes using h-PDMS stamp made it possible to fabricate printed OTFT with channel lengths down to $5{\mu}m$, and reduced the process by 20 steps compared with photolithography. As results of measuring he transfer characteristics and output characteristics of OTFT fabricated with the printing process, the field effect characteristic was verified.

• Tuberculosis and Respiratory Diseases
• /
• 제50권1호
• /
• pp.67-75
• /
• 2001

배경 : 대표적인 종양억제유전자인 p53 및 p16은 세포주기 조절 및 자연괴멸 유도에서 서로 다른 역할을 하고 있으며 폐암에서는 동시에 비활성화 되어 있는 경우가 흔하다. 이 종양억제유전자들 동시에 이입시 서로 상호작용을 통해 효과가 증진되리라 기대되고 있다. 방법 : 본 연구에서는 p53 및 p16을 아데노바이러스 벡터를 이용하여 폐암세포주에 동시에 이입하여 그 상호작용을 관찰하였다. 복합투여시 세포성장곡선을 분석하여 isobologra을 이용한 상호작용을 검증하고 세포주기의 변화 및 체외종양형성능의 변화도 관찰하였다. 결과 : Isobologram을 이용한 분석에서 adeno-virus-p53와 adenovirus-p16의 복합투여는 NCI H358에서는 상승적인 성장억제를, NCI H23에서는 부가적인 성장 억제를 보였다. 유세포분석기를 이용한 세포주기의 분석 및 체외종양형성능 검사에서도 p53 및 p16의 복합투여시 단독 투여보다 강한 억제효과를 보였다. 결론 : 이러한 상승적인 p53 및 p16의 상호작용은 이 복합요법이 새로운 유전자치료법으로 발전할 수 있는 가능성을 보였다.