• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.2
• /
• pp.69-78
• /
• 2006

Proofing is one of the inspection operations of printing and can be considered a process control step. The three main kinds of proofs are press proofs, photomechanical proofs, and digital proofs. Photomechanical and digital proofs are also generally refered to as "off-press" proofs. Off-press color proofs are more economical than press proofs. Digital proofs offer fast production time along with a much lower cost per page. Hard-copy digital proofs can be output using thermal transfer printers, ink jet printers, and color laser copiers, as well as dye sublimation and electrophotographic technology. Ink jet method is commonly using because of the reasonal price. But ink jet system is difficult to reproduce an exact color proof. This research was carried out for the purpose of optimization of ink jet color proofing, using two kinds of ink jet printers with 6 colors (C, M, Y, K, mC, mM) and 4 colors (C, M, Y, K) system.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.42-48
• /
• 2012

In the 21st century, the printing industry as well as the IT industry has made rapid development. However, despite these technological advancement in the printing industry, it is still harmful for the environment, the state regulation is insufficient. Therefore, we studied the printability for the existing heat-set web inks and the newly created phenol-free eco-inks. This ink was made by reacting rosin and unsaturated dibasic acid and ester reactant, ester reactant was used instead of phenol. Printability test were used in the IGT printability tester. Experimental conditions, the temperature $22.7^{\circ}C$, humidity 57% under conditions of 0.6cc of ink supply, the print speed 1m/sec, pressures were set at 250N. As results of this study, we were able to get the following conclusions. The properties of phenol-free ink is the same as the existing inks. So we are thought to improve some characteristics such as dispersion, able to replace the existing ink.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.88-97
• /
• 2019

In this study, when printed on a nylon material, the color strength and fastness are lower than that of a polyester material, and the nylon material shrinks due to heat and pressure, resulting in poor design and poor compatibility. To overcome this problem, we investigated the possibility of transfer DTP by adding pre-treatment process to nylon transfer DTP process. For the basic study of pre-treatment preparation, we used pure nylon material which is not compounded and dispersion ink and transfer paper applied to existing PET transfer DTP. Pre-treatment preparations were classified into three types of acryl-base polymer and pre-treated with nylon and then applied to transfer DTP to confirm their color strength and fastness. The color strength of the pre-treated nylon material increased and poly-methyl-acrylate amulsion pre-treatment showed the best color at $210^{\circ}C$, 1.5m/min and 0.3MPa. The nylon material pre-treated with washing, friction, and light fastness was judged to be more excellent and stable.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.717-718
• /
• 2008

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.11
• /
• pp.31-43
• /
• 1996

In this paper, we propsoe an encryption algorithm of image information using a mass transfer function (MTF). The algorithm is based on a diffusion phenomenon of black ink when black ink dropped in the stationary water. We mathematically analyze the phenomenon, in consideration of characteristics of image information, and apply the results of analysis to the security of image transfer phenomenon. The cryptosystem proposed in this paper enables the security services of information in narrow-band channel communication network to be provided. And in transmission of important information, it can secure against intentional disturbance and violation. Also, it can guarantee the safe flow of information.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.99.2-99.2
• /
• 2003

One of the major limitations in using adenoviral vector for gene therapy is inefficient infection of host cells. The presence of coxsackievirus and adenovirus receptor (CAR) and ${\alpha}$-integrin on cell surfaces is required for efficient adenovirus infection. In this study, we investigated the effect of trichostatin A, a histone deacetylase inhibitor, on transfection efficiency after transduction of adenovirus mediated p16$\^$INK4a/ gene transfer. In our previous study, p16$\^$INK4a/ tumor suppressor gene transfer in the non-small cell lung cancer cells (A549 cells) by transduction of recombinant adenovirus (Ad5CMV-p16) resulted in significant inhibition of cancer cell proliferation. (omitted)

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.16-21
• /
• 2006

Uneven ink transfer of a print can be traced to several causes such as an incomplete contact between the paper surface and ink film, a coarse pattern of a continuous ink film after transfer, uneven absorption, etc. Uneven ink transfer was studied in this points by the Tollenaar. Uneven distributions of printed density are reflected in low ${\ulcorner}m{\lrcorner}$ values of the print. Tollenaar's smoothness coefficient ${\ulcorner}m{\lrcorner}$ value was important factor that deciding printed quality which was easily obtain by densitometry. Limiting print density $D_{\infty}$ that obtained Tollenaar's formulation working as a influence factor at the printed quality. In this study, we obtained limiting print density $D_{\infty}$ and smoothness coefficient ${\ulcorner}m{\lrcorner}$ value of domestic newspapers and foreign newspapers. And we analyzed about properties of the newspaper. The result of this study, smoothness coefficient ${\ulcorner}m{\lrcorner}$ value and limiting print density $D_{\infty}$ showed the good results in the low porosity and low roughness newspaper. Datum which obtained by this study was used as printability factor for the quality control and improvement of domestic newspaper and wished to apply as a basic data for the domestic newspaper quality.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.4
• /
• pp.471-476
• /
• 2000

Objective : p16/INK4a, a kind of tumor suppressor genes, encodes a specific inhibitor of the cyclin D-dependent kinases CDK4 and CDK6. This prevents the association of CDK4 with cyclin D1, and subsequently inhibits phosphorylation of retinoblastoma tumor suppressor protein(pRb), thus preventing exit from the G1 phase. According to previous reports, over 50% of glioma tissue and 80% of glioma cell lines have been demonstrated inactivation of p16/INK4a gene. The purpose of this study was to determine whether recombinant adenovirus-p16 virus is a suitable candidate for gene replacement therapy in cases of glioma. Methods : Three human glioma cell lines(U251MG, U87MG and U373MG) that express mutant p16 protein were used. Replication-deficient adenovirus was utilized as an expression vector to transfer exogenous p16 cDNA into the cells ; control cells were infected with the Ad-${\beta}$-gal expressing ${\beta}$-galactosidase. To monitor gene transfer and the expression of exogenous genes, we used Western Blotting analysis. Flow cytometry studies of cellular DNA content were performed to determine the cell cycle phenotype of the glioma cells before and after treatment. Results : We showed here that restoration of p16/INK4a expression in p16 negative U87MG, U251MG and partially deleted U373MG by Ad-CMV-p16 induced growth suppression in vitro. Flow cytometric study revealed that Ad-CMV-p16 infected U87MG cells were arrested during the G0-G1 phase of the cell cycle. Expression of p16 transferred by Ad-CMV-p16 in glioma cells was highly efficient and maintained for more than seven days. Conclusions : Our results suggest that Ad-CMV-p16 gene therapy strategy is potentially useful and warrants further clinical investigation for the treatment of gliomas.

• Toxicological Research
• /
• v.20 no.2
• /
• pp.109-116
• /
• 2004

For the safety evaluation of adenovirus-mediated gene transfer, we investigated differential gene expressions after transfecting adenoviral vector containing p16 tumor suppressor gene (Ad5CMV-p16) into human non-small cell lung cancer cells. In the previous study, we showed adenovirus-mediated $p16^{INK4a}$ gene transfer resulted in significant inhibition of cancer cell growth. We investigated gene expression changes after transfecting Ad5CMV-p16, Ad5CMV (null type, a mock vector) into A549 cells by using cDNA chip and oligonucleotide microarray chip (1200 genes) which carries genes related with signal transduction pathways, cell cycle regulations, oncogenes and tumor suppressor genes. We found that $p16^{INK4a}$ gene transfer down regulated 5 genes (cdc2, cyclin D3, cyclin B, cyclin E, cdk2) among 26 genes involved in cell cycle regulations. Compared with serum-free medium treated cells, Ad5CMV-p16 changed 27 gene expressions, two fold or more on oligonucleotide chip. In addition, Ad5CMV-p16 did not seem to increase the tumorigenicity-related gene expression in A549 cells. Further studies will be needed to investigate the effect of Ad5CMV-p16 on normal human cells and tissues for safety evaluation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.526-533
• /
• 2005

Reliability problem in inkjet printhead, one of MEMS devices, is also very important. To eject an ink drop, the temperature of heater must be high so that ink contacting with surface reaches above $280^{o}C$ on the instant. Its heater is embedded in the thin multi-layer in which several materials are deposited. MEMS processes are the main sources of residual stresses development. Residual stress is one of the factors reducing the reliability of MEMS devices. We measured residual stresses of single layers that consist of multilayer. FE analysis is performed using design of experiment(DOE). Transient analysis for heat transfer is performed to get a temperature distribution. And then static analysis is performed with the temperature distribution obtained by heat transfer analysis and the measured residual stresses to get a stress distribution in the structure. Although the residual stress is bigger than thermal stress, thermal stress is more influential on fatigue life.