• 대한공업교육학회지
• /
• v.34 no.2
• /
• pp.321-330
• /
• 2009

This study presents the blow molding of injection stretch-blow molding process for PET bottle. The numerical analysis of the blow molding of PET bottle is considered in this paper using CAE with a view to minimize the thickness difference. In order to determine the design parameters and processing conditions in blow molding, it is very important to establish the numerical model with physical phenomenon. In this study, a shell model with thickness has been introduced for the purpose and blow simulations with 3-type blow process condition are carried out. The simulations resulted in the thickness distribution in good agreement with the physical phenomenon. Also, from the result of numerical analysis, we appropriately predicted the thickness distribution along the PET bottle wall and Using the result of numerical analysis we apply the preform design and blow molding process condition for optimization.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.4
• /
• pp.285-289
• /
• 2007

This study presents the preform injection molding of the injection stretch-blow molding process for PET bottles. The numerical analysis of the injection molding of a preform is considered in this paper using CAE with a view to minimize the warpage. In order to determine the design parameters and processing conditions in injection molding, it is very important to establish the numerical model with physical phenomenon. In this study, a three dimensional model has been introduced for the purpose and flow simulations of filling, post-filling and cooling process are carried out. The simulations resulted in the warpage in good agreement with the measurements. Also, from the result of numerical analysis, we appropriate -ly predicted the warpage, deformation and thickness distribution along the preform wall.

• Journal of Oral Medicine and Pain
• /
• v.42 no.3
• /
• pp.53-61
• /
• 2017

Myogenous temporomandibular disorder is a collective term for pathologic conditions of the masticatory muscles, mainly characterized by pain and dysfunction associated with various pathophysiological processes. Among the subtypes of myogenous temporomandibular disorder, myofascial pain is one of the most common muscle disorders, characterized by the presence of trigger points (TrPs). Various modalities, such as ultrasound, manipulative therapy, spray-and-stretch technique, transcutaneous electrical nerve stimulation, injection/dry needling, and low-level laser therapy are used to inactivate TrPs. Needling/injection on the TrPs is one of the most common treatments for myofascial pain. Despite the evidence, there is continued controversy over defining the biological and clinical characteristics of TrPs and the efficacy of injection/dry needling. This review discusses the current concept of injection/needling to relieve TrPs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1119-1124
• /
• 2008

This study presents the preform injection molding and the blow molding of the injection stretch-blow molding process for PET bottles. The numerical analysis of the injection molding and the blow molding of a preform is considered in this paper using CAE with a view to minimize the warpage and the thickness. In order to determine the design parameters and processing conditions in injection/blow molding, it is very important to establish the numerical model with physical phenomenon. In this study, a three dimensional model has been introduced for the purpose and flow simulations of filling, post-filling and cooling process are carried out. The simulations resulted in the warpage in good agreement with the measurements. Also, from the result of numerical analysis, we appropriately predicted the warpage, deformation and thickness distribution along the product walls.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2010

This study presents the preform injection molding and the blow molding of the injection stretch-blow molding process for PET bottles. The numerical analysis of the injection molding and the blow molding of a preform is considered in this paper using CAE with a view to minimize the warpage and the thickness. In order to determine the design parameters and processing conditions in injection/blow molding, it is very important to establish the numerical model with physical phenomenon. In this study, a three dimensional model has been introduced for the purpose and flow simulations of filling, post-filling and cooling process are carried out. The simulations resulted in the warpage in good agreement with the measurements. Also, from the result of numerical analysis, we appropriately predicted the warpage, deformation and thickness distribution along the product walls.

• The Korean Journal of Pain
• /
• v.3 no.2
• /
• pp.150-159
• /
• 1990

The patient with muscle contraction headache usually have one or more specific trigger points. These trigger points have been treated with various treatment modalities including "stretch and spray" and regional infiltration with local anesthetics with or without corticosteroids. I treated 36 patients with muscle contraction headache with regional infiltration of local anesthetics and steroid into trigger points and the results were as follows 1) The diagnosis of muscle contraction headache was possible by confirming specific trigger points by palpation. 2) Patients relieved rapidly from headache by regional infiltration of local anesthetics and steroid into the tender point. 3) Single injection was effective in relieving headache. But the curability of the single injection could not be assessed because of difficulty in follow-up study. 4) Active trigger points could be occasionally inactive, which also made difficult in assessing the effectiveness of the treatment.

• Journal of Korean Physical Therapy Science
• /
• v.2 no.1
• /
• pp.413-422
• /
• 1995

The trigger point phenomenon is an extremely common syndrome in physical therapy room. The symptoms created by these syndromes may be interpreted as originating in discogneic disease, nerve entrapment syndromes, viscerosomatic pain, and certain myalgic pain of unknown etiology. Injuries, viral or bacterial infections, immobilization, psychogenic stress, and other environment factors can preciptate and perpetuate these syndromes, which may occur in any of the voluntary muscles of the human body and thus lead to a multitude of myofascial pain syndromes. Obviously symptomatic treatment can meet with only partial success. Knowledge of the trigger point phenomenon will aid the diagnostician in understanding otherwise in explicable symptom. The trigger point are $2{\sim}5mm$ in diameter, hyperirritable palpable taut in a tissue, when compressed, is locally tender, if sufficiently hypersensitive, give rise to referred pain and tenderness, and sometimes to referred automatic phenomena and distortion of proprioception. The treatment of myofascial trigger point pain syndrome is not difficult once the source of the problem has been determined. Where as many modalities may be used, two of the most effective are spray-and stretch and TP injection. These can be followed by deep massage, specific, manual resistive exercise, and an exercise program which the patient can follow at home. The goal of management is to inactivate the TPs and to restore shortened and stretch resistent muscles to their full range of motion. The purpose of this case study was to know about the pathophysiologic mechanism of the trigger point and will enable to physical therapist to direct his treatment to the real source of trouble.

• Transactions of Materials Processing
• /
• v.14 no.3 s.75
• /
• pp.233-238
• /
• 2005

Blow molding is divided into three categories, injection stretch blow molding, injection blow molding, and extrusion or direct blow molding. Extrusion blow molding has been studied experimentally to characterize the blowing behavior of parison. Blow conditions such as blowing temperature and cooling time were the experimental variables in this blowing experiment. Wall thickness of the lower part of blow molded sample was thicker than that of the upper part because of the sagging of parison during extrusion process. As temperature increases the wall thickness and the weight of blow molded sample decreased. No thickness variations in the blowing sample were observed according to the cooling time. The lower part of the sample showed high degree of crystallinity compare with the upper part of the sample. Thus the lower part of the sample was strong mechanically and structurally. It was recognized that the uniform wall thickness could not be obtained by only controlling the operational conditions. Parison variator should be introduced to get uniform wall thickness of parison and subsequently produce uniform wall thickness of blow molded product.

• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.200-205
• /
• 1996

Radiofrequency thermocoagulation(RF) techniques are safe and effective methods as compared to neurodestructive procedure. Other advantages are: ability to perform RF lesions under local or sedative anesthesia, rapid recovery period, low incidence of morbidity and mortality, ability to repeat RF lesions, and leaves no significant scarring. We performed C2 ganglionotomy by RF lesion generator on a patient, suffering post-traumatic occipital neuralgia, as the patient did not respond to conservative therapies such as: trigger point injection, TENS, cryotherapy and stretch, occipital nerve block, C2 ganglion block. Prognostic nerve block was performed usng local anesthetics. Excellent effect was conformed before C2 ganglionotomy. This procedure was performed under fluoroscopy. Type RCK-2A Rosomoff Cordotomy kit was used to stabilize the head and neck. Postoperatively, the patient was free of occipital pain and head motions no longer triggered pain. To date, the patient remains symptom free except for some cervical discomfort.