• 부모자녀건강학회지
• /
• 제19권1호
• /
• pp.17-24
• /
• 2016

Purpose: This study examined the level of students' anxiety depending on the injection type, education methods, and the students' characteristics. Methods: 209 first year nursing students were randomly assigned to each group by three factors -injection methods, video watching, and number of practice. Injection methods had two levels (IV and IM). Video watching also had also two levels (video watching and non-watching group). And the number of practice had 4 levels according to number of practice (2, 4, 6, and 8 times). The video watching group was watching 30 minutes video before manikin practice. After 5 to 15 minutes of manikin practice, the sufficiency of practice and the level of anxiety were measured. The data were analyzed by t-test and one way ANOVA. Results: The anxiety of the IV practice was higher than that of IM. The students who have experiences of working at hospital or the similar institution were lower in anxiety. The higher self-confident in sufficiency of practice lowered the students' anxiety. But watching video and the number of practices had no effects on the level of anxiety. Conclusion: To effectively lower the anxiety of nursing students in the nursing practice education, lecture methods and education tools are needed to develop.

• 기본간호학회지
• /
• 제25권4호
• /
• pp.231-239
• /
• 2018

Purpose: This study was done to understand nursing students' exposure of needlestick and sharp injuries (NSSI), level of anxiety as well as experience of practicing injection with human beings during Fundamentals of Nursing (FN) practice. Methods: Data consisted of self-report questionnaires completed by 571 nursing students who had completed an injection practice in FN. The questionnaire included questions on general characteristics, exposure to NSSI, experience of practicing injections with human beings, level of anxiety and other experiences. Data were analyzed using descriptive statistics and content analysis. Results: Of the students, 17.5% experienced NSSI and 83.2% performed invasive injection procedures in the FN practice. The level of anxiety was 4.62-6.46/10 points when injecting a classmate and 1.27-1.93/10 points when using manikins. The feeling most often reported was worried about making a mistake that could hurt my classmate (57.2%). Conclusion: Nursing students are exposed to NSSI and experience a high degree of anxiety in invasive injection practice. These results indicate that it is necessary to develop and implement standardized NSSI prevention and anxiety reduction programs in FN.

• 대한약침학회지
• /
• 제4권1호
• /
• pp.55-58
• /
• 2001

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.229-230
• /
• 2006

The global metal injection moulding industry is getting mature. The technology is on its way to grow from a niche technology to a widely accepted manufacturing process. This paper addresses the latest technological trends in MIM. Challenges in materials development as well as the current limits of the technology are discussed. Trends in processing like 2-component injection moulding and micro injection moulding are presented. The European MIM market situation is described and some key factors for business success are addressed. In the discussion of future business opportunities best practice examples are included.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.67-74
• /
• 2009

Injection molding have been used for manufacturing various fields of automotive interior trims for years. The demands on the injection molding technique are grown with the further development of the automobile technique and the design presentations for cost reduction and environment-friendly. This paper shows that multi-component injection conditions are different from general injection, also shows how to optimize part design and mold design and how to manufacturing through the efficient use of multi-component injection in development process using core back system. To fulfill this purpose, all influential process parameters related to the quality of automobile parts were analyzed in terms of the correlation between them. Base on that, a innovative process will be developed by injection engineers to implement it in practice.

• 지역사회간호학회지
• /
• 제28권3호
• /
• pp.347-356
• /
• 2017

Purpose: The purpose of this study was to provide basic evidence to improve community health nursing practice education by analyzing the current status of actual operation, program outcomes and evaluation methods, and the level of achieving learning goals. Methods: Data were collected through an e-mail survey from 155 professors teaching community health nursing in April 2016. Out of 45 responses in total, 42 cases were used for analysis (response rate 29.0%). Results: Community health nursing practice was a 3-credit course in most of the schools (66.7%) and included a practice at public health centers without exception. The most common diagnosis classification system was OMAHA (81.0%). The core fundamental nursing skills evaluated during the practice were subcutaneous injection, vital signs, oral administration, and intradermal injection. Among the subjects of community health nursing practice, the area with the highest potential for achieving learning goals was primary health care provision (4.4/5) and the area with the lowest potential was disaster management (2.4/5). Conclusion: The results of this study show that there would be active efforts to complement and improve several problems of the community health nursing practice among the community health nursing practice instructors for more effective and qualitative community health nursing practice.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권6호
• /
• pp.2576-2590
• /
• 2020

The fundamental reason why most SQL injection detection methods are difficult to use in practice is the low reusability of the implementation code. This paper presents a reusable SQL injection detection method for Java Web applications based on AOP (Aspect-Oriented Programming) and dynamic taint analysis, which encapsulates the dynamic taint analysis processes into different aspects and establishes aspect library to realize the large-grained reuse of the code for detecting SQL injection attacks. A metamodel of aspect library is proposed, and a management tool for the aspect library is implemented. Experiments show that this method can effectively detect 7 known types of SQL injection attack such as tautologies, logically incorrect queries, union query, piggy-backed queries, stored procedures, inference query, alternate encodings and so on, and support the large-grained reuse of the code for detecting SQL injection attacks.

• The Korean Journal of Pain
• /
• 제27권3호
• /
• pp.197-199
• /
• 2014

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.4223-4238
• /
• 2011

최근 환경에 대한 관심이 증대되면서 지반보강 재료의 친환경성이 강조되며, 이에 따라 각종 지반주입 재료가 개발되고 있으나 건설현장에서는 대부분 물유리계 재료가 활용되고 있다. 또한 최근 선진국에서는 물유리계 지반 주입재의 단점인 내구성 문제를 해결하기 위하여 여러 가지 공법을 개발하고 있는 실정이다. 본 연구에서는 기존 그라우트 재료의 문제점을 향상시키기 위하여 친환경적인 무기계 가소성그라우팅 재료에 대한 실내 시험을 통해 그라우팅 재료의 공학적 특성을 파악하고자 하였다. 실내시험에서는 그라우팅 재료의 사용량에 따른 점성, 가소성, 압축강도 및 환경영향평가에 대한 검토를 수행하여 최적 배합에 대한 범위를 설정하고, 설정된 배합의 현장적용을 통해 기존의 그라우팅 재료보다 경제적, 공학적으로 우수한 그라우트 재료에 대하여 평가하고자 한다.

• Geomechanics and Engineering
• /
• 제25권1호
• /
• pp.31-40
• /
• 2021

Injection grouting is one of the most common ground improvement practice to increase the strength and reduce the hydraulic conductivity of soils. Owing to the environmental concerns of conventional grout materials, such as cement-based or silicate-based materials, bio-inspired biogeotechnical approaches are considered to be new sustainable and environmentally friendly ground improvement methods. Biopolymers, which are excretory products from living organisms, have been shown to significantly reduce the hydraulic conductivity via pore-clogging and increase the strength of soils. To study the practical application of biopolymers for seepage and ground water control, in this study, we explored the injection capabilities of biopolymer-based grout materials in both linear aperture and particulate media (i.e., sand and glassbeads) considering different injection pressures, biopolymer concentrations, and flow channel geometries. The hydraulic conductivity control of a biopolymer-based grout material was evaluated after injection into sandy soil under confined boundary conditions. The results showed that the performance of xanthan gum injection was mainly affected by the injection pressure and pore geometry (e.g., porosity) inside the soil. Additionally, with an increase in the xanthan gum concentration, the injection efficiency diminished while the hydraulic conductivity reduction efficiency enhanced significantly. The results of this study provide the potential capabilities of injection grouting to be performed with biopolymer-based materials for field application.