• Design & Manufacturing
• /
• 제10권3호
• /
• pp.1-7
• /
• 2016

In the semiconductor industry the memory and chip were developed to high density memory and high performance chip, so circuit design was also high integrated and the test bed was needed to be thin and fine pitch socket. LGA(Land Grid Array) IC socket with thin wall thickness was designed to satisfy this requirement. The LGA IC socket plastic part was manufacture by injection molding process, it was needed accuracy, stiffness and suit resin with high flowability. After injection molding process the side gates were needed to remove for further assembly process. ln this study, the cold press cutting process was applied to remove the gates. For design of punch and die, the cold press cutting analysis was implemented by$DEFORM-2D^{TM}$ ln consideration of the simulation results, an adequate punch and die was designed and made for the cutting unit. In order to verify the performance of cutting process, the roughness of cutting section of the part was measured and was satisfied in requirement.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.98-104
• /
• 2018

Deflected 4-way panels of ceiling air conditioners produced by injection molding process have caused dew condensation at the edge of products. In order to prevent this drawback with reducing weight and deformation, this study proposed renovated process adopting microcellular foaming. According to results from 2-sample t-test and analysis of variance(ANOVA), the critical factors affecting weight were melt temperature and injection speed. In addition, the vital effects on deformation were structure at the edge, mold temperature and cooling time. Optimal conditions of these parameters were derived by regressive analysis with CAE and response surface method(RSM), and then applied to an actual design and process stage to analyze performance. As a results, it clearly showed that new process improved process capability as well as reduced both weight and deformation by 18.8% and 71.9% respectively compared to the conventional method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.983-988
• /
• 2004

In the present study, the effects of orthogonal ribs on structural warpage during injection molding process were investigated. Basic ribbed models for the evaluation of degree of warpage were introduced and designed. Injection molds for these models are manufactured based on the full 3D CAD/CAM technology and specimens are prepared for experiment. Numerical analysis using commercial plastic injection molding analysis software was also performed to compare the results with experimental ones. The variations of materials and parameters such as injection time, mold temperature, melt temperature, holding time were considered in the present work. It was shown that orthogonal ribs have significant effect on the reduction of warpage during the injection molding process.

• Design & Manufacturing
• /
• 제2권6호
• /
• pp.38-42
• /
• 2008

Recently, the demands of digital camera and miniature camera module for mobile-phone is increased significantly. Lenses which is the core component of optical products are made by the injection molding(plastic lens) or GMP(glass lens). Plastic lens is not enough to improve the resolution and performance of optic parts. Therefore, the requirement of glass lens is increased because it is possible to ensure the high performance and resolution. In this paper, the thermal stress analysis of 3 cavity GMP mold for molding glass lens was performed for estimating the thermal stress and amount of deformation. Finally, the modification plan based on the analysis results was deducted.

• Design & Manufacturing
• /
• 제7권1호
• /
• pp.19-22
• /
• 2013

Almost all injection molds have multi-cavity runner system for mass production, which are designed with geometrically balanced runner system in order to accomplish filling balance between cavity to cavity during processing. However, even though geometrically balanced runner is used, filling imbalances have been observed. So, many studies for improving filling balance in the multi-cavities molds are worked up. In this study, the Melt-Buffer which is a new runner system for filling balance has been suggested, and a series of experiment about degree of filling balance in cavity-to-cavity was conducted in the mold with the Melt-Buffer. From the experiment, the filling balance was increased up to 5~6% by using the Melt-Buffer.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.50-56
• /
• 2004

Finishing is the final process in molds manufacturing and consumes much process time. Also, it influences on surface quality of molds. But, there are few systematic methods to control the process. In this work, basic experiments were carried out to study the machining characteristics of the finishing tools. From the experiments, critical surface roughness and wear coefficient are suggested to reduce the number of finishing steps and to plan a systematic finishing procedure. Comparison experiments were carried out between the expert's method and the new method, which is based on the results of this research. From the experiments, it is verified that the systematic method takes less time and generates less form error in the machined surface than the worker's method.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.63-69
• /
• 2007

The high speed machining has been widely applied to manufacture dies and machine elements in industrial field. Especially, 5-axis milling has been employed to produce a wide range of turbine blades, impellers and complex molds. In this study, the machining characteristics of injection molds were investigated according to tool tilting angles in 5-axis milling. The cutting force and surface roughness were investigated with various tool tilting angles. When the tool tilting angle was over than 10 degree, the characteristics of cutting force and surface roughness were improved in machining of Al alloy.

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.95-98
• /
• 2008

Almost all injection molds have multi-cavity runner system for mass production, which are designed with geometrically balanced runner system in order to accomplish filling balance between cavity to cavity during processing. However, even though geometrically balanced runner is used, filling imbalances have been observed. So, many studies for improving filling balance in the multi-cavities molds are worked up. In this study, the Melt-Buffer which is a new runner system for filling balance has been suggested, and a series of experiment about degree of filling balance in cavity-to-cavity was conducted in the mold with the Melt-Buffer. From the experiment, the filling balance was increased up to $5^{\sim}6%$ by using the Melt-Buffer.

• Design & Manufacturing
• /
• 제8권1호
• /
• pp.1-4
• /
• 2014

Large injection molds commonly have molding defects such as flashes and variation of product thickness. In this study, we conducted injection molding CAE analysis to find out the cavity pressure and structural analysis to find out mold deflection as input load conditions injection pressure obtained from injection molding analysis. As the results from CAE analysis, we found which element is the most effective on the mold deflection and we suggested a mold design to minimize the mold deflection.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1997-2000
• /
• 2005

In this work, the effects of orthogonal ribs on warpage of plastic structure through injection molding process were investigated. Three kinds of injection molds were prepared to perform injection molding experiments of orthogonal stiffened plastic plate. The warpage of each injection molded specimen was measured using 3D CMM. And plastic injection molding analysis with commercial code was performed for the presented model. Numerical results of injection molding analysis were compared with those of experiments. It was shown that orthogonal ribs have a significant effect on the warpage of the structure in both cases of experiment and numerical analysis.