• Journal of Korean Society for Quality Management
• /
• v.29 no.3
• /
• pp.86-96
• /
• 2001

The objective of this research is to develop a robust design methodology for plastic injection molded parts wherein warpage will be minimized by a complex method which is a kind of a simple direct search method. The design space considered for optimization is divided Into two sub-design space : mold and process conditions. Warpage is quantified using the Moldflow injection molding simulation software. The design methodology was applied to an actual part of a fax machine, the Guide-ASF model, through two different design policies. The significance of this study is the synthesis of a computer simulation of injection molding process and optimization technique to determine the optimal robust design solution.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.290-293
• /
• 2004

Recently, injection molded plastic optical products are widely used, because injection molding process has advantages of low cost and high productivity. However, there remains residual birefringence and residual stresses originated from flow history and differential cooling. The present study focused on developing a technique measuring birefringence in optical plastic parts using R-G-B separation of white light. The main idea of an analysis comes from the fact that more information can be obtained from the distribution of retardation caused by different wavelengths. A complete system to give the quantitative values of retardation covering high order 2-D birefringence will be demonstrated. Further investigation is under way to improve the accuracy of the system using diodes as light sources.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.621-626
• /
• 2001

Microcellular foaming process was developed at MIT in 1980's to save a quantity of raw materials and improve mechanical properties. There are many process variables in appling microcellular foaming process to the conventional injection molding process. Of all process variables, part dimension control and shrinkage are the most influential on the post molded dimension. The post molding dimensional change of thermoplastic resins is important to tool designers for predicting the specific difference of molded part vs. actual mold cavity. Generally, articles injection molded are smaller in size than the cavity; hence, the term shrinkage factor is used to define the allowance a designer specifies. It is important to consider the factors that influence molded part dimension. According to ASTM Designation: D 955, shrinkage from mold dimensions of molded plastics was measured. In injection molding, the difference between the dimensions of the mold and of the molded article produced therein from a given material may vary according to the design and operation of the mold. In this paper, shrinkage data of molded plastic parts was obtained. It can be an important information for designing optimum mold system in a microcellular foaming injection molding process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.507-514
• /
• 2003

Most of CAE analyses for injection molding have been based on the Mele Shaw's approximation: two-dimensional flow analysis. in some cases, that approximation causes significant errors due to loss of the geometrical information as well as simplification of the flow characteristics in the thickness direction. Although injection molding analysis software using three-dimensional solid elements has been developed recently, such as Moldflow Flow3D, it does not contain a deformation analysis function yet. The present work covers three-dimensional deformation analysis or injection molded plastic parts using solid elements. A numerical scheme for deformation analysis has bun proposed from the results of injection molding analysis using Moldflow Flow3D. The accuracy of the proposed approach has been verified through a numerical analysis of rectangular plates with various thicknesses in comparison with the classical shell-based approach. In addition, the reliability of the approach has also been proved through an industrial example. an optical plastic lens, in comparison of real experiments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04a
• /
• pp.55-56
• /
• 2009

A light guiding plate (LGP) with nanometer-sized patterns was fabricated by injection molding method which employed electrically healed mold and the transcription of injection-molded parts was investigated. A Ni stamper was fabricated using MEMS technology. The Ni stamper was then installed in a movable heated core which is a key part of the mold. Using this mold, injection-molded plastic LGP parts were manufactured at different mold temperatures and the effect of the temperature on the transcription of the parts was investigated.

• Resources Recycling
• /
• v.13 no.3
• /
• pp.43-49
• /
• 2004

In this study. an experimental work was performed to mold tensile specimens by using the injection molding machine. Melt temperature, mold temperature and the mixed ratio of recycled resin were selected as processing parameters for studying the effect of those conditions on the shrinkage and weight of molded parts. As a result, the shrinkage was increased with the higher mold and melt temperature and it was more sensitive to the change of mold temperature. On the other hand, the weight of molded parts was decreased with the increment of mold and melt temperature.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.303-306
• /
• 2001

To shorten the delivery time for new products, a lot of prototype plastic parts manufacturing technologies have been developed including injection molding, vacuum casting, thermal forming and so on. Among them, RIM is becoming one of a important soft tooling methods to produce prototype and mass production parts within short time. Further more, as the rapid prototyping technology based tooling methods are playing an important role in prototype manufacturing industry, the utility of the RIM is increasing. But few analyses and mold design techniques have been developed so far due to its chemical and mechanical complexity during the packing and curing process. This research suggests mold gate design criteria to prevent bobbles from molded parts through simplified mathematical model and change of bubble sizes according to the geometry of the molded parts through experiments. Also this study shows the differences of bobble generation mechanism between RIM and injection molding.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.737-740
• /
• 2000

Injection molded plastic parts have many appearance imperfections: weld line sink mark flow mark, gloss, shading, scratching, etc. Because these appearance faults have not accepted esthetically, so pastic parts are produced through painting or texturing. The purpose of this paper is to develop a paintless molded part of TV Mask Front, using numerical simulations and experiments. In order to minimize problems of injection, this study carried out computer aided injection mold filling simulations using MF/FLOW. Based on these numerical results we developed FR(Flame Retardant) HIPS and estabilished guidelines of part design, mold design, and processing conditions. We took effects of cost savings, inprovement of productivity, and utilization of recycling by eliminated painting process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.265-268
• /
• 2005

Thermoplastic elastormer (TPE) has many advantages such as high flexibility, high elasticity and high elongation, etc. TPE is easily molded such as plastic materials, therefore, many TPE parts are applied as home appliances and mechanical parts. However, if TPE is once molded, its mechanical properties are changed by injection molding conditions such as melt temperature, mold temperature, injection pressure and holding pressure, etc. In this study, the influences of the injection molding condition on the mechanical properties of thermoplastic vulcanizates(TPVs), which is one of the TPE, were investigated. By the injection molding experiment, as increasing the melt temperature, the tensile strength, shrinkage and hardness decreased. By the scanning electron microscope (SEM) analyzing the TPVs' crystallization, the morphology was affected by the melt temperature.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.195-198
• /
• 2007

The present work focuses on the prediction of birefringence in injection-molded plastic part and its improvement by rapid mold heating. To calculate birefringence, flow-induced residual stress is computed through a fully three-dimensional injection molding analysis. Then the stress-optical law is applied from which the order of birefringence can be evaluated and visualized. The birefringence patterns are predicted for a rectangular plate with a variation of mold temperatures, which shows that the amount of molecular orientation and birefringence level decreases with an increase of mold temperature. The effect of mold temperature on the order of birefringence is also studied for a thin-walled rectangular strip, and compared with experimental measurements. Both predicted and experimental patterns of birefringence are in agreements on the observation that the birefringence level diminishes significantly when the mold temperature is raised to above the glass transition temperature.