• 에너지공학
• /
• 제16권3호
• /
• pp.120-127
• /
• 2007

본 연구의 목적은 디젤연소장의 분위기조건에 따라 다성분 혼합연료의 질량분률이 분무착화 및 연소특성에 미치는 영향을 실험적으로 고찰하는데 있다. 착화 및 연소특성은 화학발광계측법 및 직접촬영법을 이용하여 분석되었다. 실험은 광계측기를 사용하여 RCEM에서 이루어졌으며, 이소옥탄, 노말 도데칸, 노말 헥사데칸으로 혼합한 다성분연료는 커먼레일 인젝터의 전자제어에 의해 RCEM의 연소실 내로 분사된다. 실험조건은 분사압력 42, 72, 112 MPa과 분위기온도 700, 800, 900 K로 하였다. 그 결과로서 착화지연은 고세탄가성분에 의존하고, 분위기온도가 낮을 경우 저비점성분 혼합비율의 증가에 따라 휘도영역이 현저하게 낮아지며, 열발생률이 증가하면서 확산연소기간을 단축시킨다.

• 한국컴퓨터정보학회논문지
• /
• 제12권2호
• /
• pp.123-130
• /
• 2007

본 논문에서는 소동물 생체내 실험시 서로 다른 장비에서 획득된 영상의 융합 및 정합을 위한 방법을 제안한다. 마우스의 꼬리 정맥에 $[[^{18}F]FDG$를 주사하여 60분 섭취후 서로 다른 장비에서 동일한 위치의 영상을 획득하기 위하여 아크릴 재질의 소동물 가이드에 기준마크를 설정하고 microPET과 CT 영상을 획득하였다. MicroPET으로 획득된 리스트모드(list-mode) 데이터는 Fourier Rebinning(FRB) 방법을 사용하여 사이노그램(Sinogram)으로 변환 후 4 번의 반복횟수를 가지는 Ordered Subset Expectation Maximization(OSEM) 알고리즘으로 재구성하였다. MicroPET 영상획득후 PET/CT의 CT를 이용하여 CT영상을 획득하였다. MicroPET 영상에서 폐영역을 정확히 찾아내는 어려움이 있어. 해부학적 정보를 제공하는 CT 영상을 이용하여 폐 영역을 구분하였다. 영상 융합을 위한 불일치 부분을 해결하기 위하여 기준마크의 정보와 폐 영역의 정보를 이용하여 회전과 이동정보를 가지는 어파인 (affine) 변환 행렬 구하여 영상 정합에 사용하였다. 이 방법은 정량적 정확성과 영상 해석의 정확성을 개선할 것으로 기대된다.

• 한국분무공학회지
• /
• 제25권1호
• /
• pp.21-26
• /
• 2020

The objective of this work is to numerically reveal the effect of equivalence ratio change on the simultaneous reduction of NO_X and soot emissions from the simulated-EGR compression ignition engine containing CO₂. An experiment was conducted by using a single-cylinder common-rail injection system engine, an intake control system, and exhaust emissions analyzers. The numerical analysis results were validated under the same experimental conditions. To investigate the effect of equivalence ratio by simulated-EGR containing CO₂, the O₂, N₂, and CO₂ mole fraction were changed in the initial air conditions to the cylinder. The results were analyzed in terms of peak cylinder pressure, indicated mean effective pressure, indicated specific nitrogen oxide, and indicated specific soot. It was revealed that ignition delay characteristics and heat release rate (ROHR) characteristics were not significantly different according to the equivalence ratio. However, as the equivalence ratio increased from 0.68 to 0.83, the maximum combustion pressure and IMEP decreased by about 6.5% and 9.4%, respectively. In the case of ISFC, as is well known, the trend is opposite of IMEP. In the case of ISNO, as the equivalence ratio increased, less NO was generated, and as the equivalence ratio increased by 0.05, the ISSoot value of about 10% increased.

• 전기학회논문지
• /
• 제66권11호
• /
• pp.1584-1590
• /
• 2017

This paper presents a implementation method of reliable speed limitation controller considering motor parameter variation in high speed operation. In spinning process of drum washing machine, speed increase has to be limited when unallowable imbalance mass is detected. Otherwise, severe noise and vibration can happen because noise and vibration are proportional to imbalance mass. To detect imbalance mass, d-axis current magnitude is used. However, we have to compensate for back-emf and power supply variation by means of detecting them because d-axis current is affected by both of them. On the other hand, we have to carefully estimate back-emf because back-emf is affected by stator resistance variation and inverter voltage error. Stator resistance variation can happen by manufacturing process for mass production or temperature variation in running. And there are inverter voltage errors between command voltage from micro-computer to inverter and real voltage from inverter to motor because of rising and falling time delay and turn-on resistance of power semiconductor switch. To solve this problem, we propose 2-step align current injection method which is to inject step-wise current right before starting. By this method, we can simply obtain stator resistance by ratio of voltage without inverter voltage error and current, and we can measure inverter voltage error. So we can obtain more exact model current, and then by simple calculation with compensation gain, we can estimate more accurate motor back-emf. We show that this method works well. It is verified through experiments.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권3호
• /
• pp.260-265
• /
• 2005

Patient-controlled analgesia (PCA) has been widely used for postoperative pain control in medical surgery parts. Conventional intramuscular analgesia (IMA) is also effective in postoperative pain control, but it has some disadvantages that depend on patients' perception of pain and the anxiety that they endure caused by the delay of the injection time. This study was conducted to assess the efficacy and postoperative outcomes of intravenous PCA compared to IMA injections in 36 patients (BSSRO). Three factors were compared: amount of pain in PCA and IMA group ; amount of pain according to the sex in PCA and IMA group and the amount of pain according to the analgesia use. Results of this study did not demonstrate a statistically significant difference in any of these, using a p value of 0.05. The results of this study were as follows. : 1. There was no statistically significant difference in VAS pain score between IMA group and PCA group. 2. There was no statistically significant difference according to the sex. 3. There was no statistically significant difference according to the amount of PCA. The history of PCA is about 30 years and many literatures have reported about its effects, complications, methods, advantages and disadvantages. So, this study has some limitations of small sample size to conclude the effects of PCA. But when the decision about the method for postoperative pain control has to be made, it should be made based on patient or physician preference and cost factors rather than on the trend.

• 한국분무공학회지
• /
• 제10권2호
• /
• pp.1-9
• /
• 2005

An experimental study was carried out to obtain the fundamental data about the effects of radical ignition on premixture combustion. A CVC(constant volume combustor) divided into the sub-chamber and the main chamber was used. Numerous narrow passage holes are arranged between the main chamber and the sub-chamber. The products including radicals generated by spark ignition in tile sub-chamber derives the simultaneous multi-point ignition in the main chamber. We have examined the effects of the sub-chamber volume, the diameter and number of passage holes, and the equivalence $ratio({\Phi})$ on the combustion characteristics by means of burning pressure measurement and flame visualization. In a CVC, the overall burning time including the ignition delay became very short and the maximum burning pressure was slightly increased by the radical ignition(RI) method in comparison with those by the conventional spark ignition(SI) method. Combustible lean limit by RI method is extended by ${\Phi}=0.25$ compared with that by SI method. Also, In cases of charging the number and the diameter for the fixed total cross section of the passage holes, combustion period increased significantly at a sub-chamber with a single hole, but those of the other conditions had almost a similar tendency in the sub-chamber with 4 or more holes. regardless of equivalence ratio. Therefore, it was Proved that a critical cross section exists with the number of passage holes.

• 한국가스학회지
• /
• 제19권6호
• /
• pp.28-33
• /
• 2015

2012년 7월부터 우리나라 천연가스 열량에 대한 기준이 기존의 표준열량제에서 열량범위제로 변경되면서 가정이나 산업체로 공급되는 가스 열량 변화가 가스기기 성능에 미치는 영향을 규명하고자 하는 노력이 이루어지고 있다. 특히 천연가스를 주 연료로 사용하는 열병합 발전용 엔진의 경우 이러한 열량 변화에 의해 엔진 성능 전반에 걸쳐 영향이 있을 것으로 예상된다. 따라서 이번 연구에서는 열량범위제를 고려한 CNG 열량 변화가 디젤-CNG 혼소엔진의 효율 및 연소특성에 미치는 영향에 대해 조사하였다. CNG 모사 연료의 발열량은 $10,400kcal/Nm^3$에서 $9,400kcal/Nm^3$까지 질소 가스를 CNG에 희석하는 방식으로 변경을 하였다. 우선 디젤연료의 분사시기와 혼소율을 80%로 고정한 조건에서 가스연료의 발열량 변화가 엔진 효율 및 출력 변화에 미치는 영향을 살펴보았으며, 열방출율 및 연소압력 등의 변화를 측정하였다. 실험 결과로부터 가스 열량이 낮아질수록 엔진 출력과 효율이 모두 감소함을 알 수 있었으며, 점화지연시간과 연소기간은 가스 열량 감소에 관계없이 일정하게 유지되는 반면 최대연소압력은 낮아짐을 볼 수 있었다.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 2002년도 학술대회지
• /
• pp.317-334
• /
• 2002

Ginsenosides are metabolized (deglycosylated) by intestinal bacteria to active forms after oral administration. 20(S)-Protopanaxadiol $20-O-{\beta}-D-glucopyranoside$ (M1) and 20(S)-protopanaxatriol (M4) are the main intestinal bacterial metabolites (IBMs) of protopanaxadiol- and protopanaxatriol-type glycosides. M1 was selectively accumulated into the liver soon after its intravenous (i.v.) administration to mice, and mostly excreted as bile; however, some M1 was transformed to fatty acid ester (EMl) in the liver. EM1 was isolated from rats in a recovery dose of approximately $24mol\%.$ Structural analysis indicated that EM1 comprised a family of fatty acid mono-esters of M1. Because EM1 was not excreted as bile as Ml was, it was accumulated in the liver longer than M1. The in vitro cytotoxicity of M1 was attenuated by fatty acid esterification, implying that esterification is a detoxification reaction. However, esterified M1 (EM1) inhibited the growth of B16 melanoma more than Ml in vivo. The in vivo antitumor activity paralleled with the pharmacokinetic behavior. In the case of M4, orally administered M4 was absorbed from the small intestine into the mesenteric lymphatics followed by the rapid esterification of M4 with fatty acids and its spreading to other organs in the body and excretion as bile. The administration of M4 prior to tumor injection abrogated the enhanced lung metastasis in the mice pretreated with 2-chloroadenosine more effectively than in those pretreated with anti-asialo GMl. Both EM1 and EM4 did not directly affect tumor growth in vitro, whereas EM1 promoted tumor cell lysis by lymphocytes, particularly non-adherent splenocytes, and EM4 stimulated splenic NK cells to become cytotoxic to tumor cells. Thus, the esterification of IBM with fatty acids potentiated the antitumor activity of parental IBM through delay of the clearance and through immunostimulation. These results suggest that the fatty acid conjugates of IBMs may be the real active principles of ginsenosides in the body.

• Journal of Korean Neurosurgical Society
• /
• 제62권5호
• /
• pp.526-535
• /
• 2019

Objective : While the risk of aneurysmal rebleeding induced by catheter cerebral angiography is a serious concern and can delay angiography for a few hours after a subarachnoid hemorrhage (SAH), current angiographic technology and techniques have been much improved. Therefore, this study investigated the risk of aneurysmal rebleeding when using a recent angiographic technique immediately after SAH. Methods : Patients with acute SAH underwent immediate catheter angiography on admission. A four-vessel examination was conducted using a biplane digital subtraction angiography (DSA) system that applied a low injection rate and small volume of a diluted contrast, along with appropriate control of hypertension. Intra-angiographic aneurysmal rebleeding was diagnosed in cases of extravasation of the contrast medium during angiography or increased intracranial bleeding evident in flat-panel detector computed tomography scans. Results : In-hospital recurrent hemorrhages before definitive treatment to obliterate the ruptured aneurysm occurred in 11 of 266 patients (4.1%). Following a univariate analysis, a multivariate analysis using a logistic regression analysis revealed that modified Fisher grade 4 was a statistically significant risk factor for an in-hospital recurrent hemorrhage (p=0.032). Cerebral angiography after SAH was performed on 88 patients ${\leq}3$ hours, 74 patients between 3-6 hours, and 104 patients >6 hours. None of the time intervals showed any cases of intra-angiographic rebleeding. Moreover, even though the DSA ${\leq}3$ hours group included more patients with a poor clinical grade and modified Fisher grade 4, no case of aneurysmal rebleeding occurred during erebral angiography. Conclusion : Despite the high risk of aneurysmal rebleeding within a few hours after SAH, emergency cerebral angiography after SAH can be acceptable without increasing the risk of intra-angiographic rebleeding when using current angiographic techniques and equipment.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제18권6호
• /
• pp.367-373
• /
• 2018

Background: Fear of local anesthesia (LA) is a significant impediment to dental care as many patients delay or avoid treatment to avert pain. Computer-controlled local anesthetic delivery system (CCLAD), with constant and controlled rate of flow, present a painless alternative. The present study aimed to compare anxiety and pain perceived with conventional and computerized systems, for different stages of anesthesia delivery when administering various nerve blocks. Methods: One hundred patients requiring bilateral LA participated in the study. One side was anesthetized using one system and the contralateral side was anesthetized using the other, in two separate appointments. Patients assigned anxiety scores on a 5-point scale and used the visual analogue scale (VAS) for pain determination at needle insertion, during delivery of anesthetic solution, immediately after injection, and at the end of the periodontal procedure. Each patient's preference for the delivery system of future injections was also recorded. Results: Patients reported significantly lower anxiety levels with CCLAD compared to the syringe. Significantly lower mean VAS scores for anesthesia deposition, pain immediately after, and at the end of the periodontal procedure were also noted. However, pain at needle insertion was comparable between the two systems, with no statistical significance. Overall, 64.4% patients preferred CCLAD for future anesthesia. Conclusion: Lower pain perceived with CCLAD and higher preference for the system suggest that CCLAD should replace conventional syringes to allow pain-free dental treatment.