• 대한간호학회지
• /
• 제28권2호
• /
• pp.303-318
• /
• 1998

Cutaneous stimulation and distraction are independent nursing interventions used in various painful conditions, which is explained by gate control theory. This study was aimed at identifying the effect of cutaneous stimulation, distraction and combination of cutaneous stimulation and distraction on the reduction of intravenous injection pain levels of chemotherapy patients. Repeated measurement post test research design was used for one group. Fifty-three cancer patients who received intravenous chemotherapy regulary in outpatient injection rooms of D medical center and Y medical center in Taegu were studied from June 23, 1997 to July 12, 1997. First the intravenous injection pain level of the control period was measured. Second, the intravenous injection pain level of the experimental period using cutaneous stimulation was measured. Third, the intravenous injection pain level of the experimental period using distraction was messured. Fourth, the intravenous injection pain level of the experimental period using a combination of cutaneous stimulation and distraction was measured. The instruments used for this study were a visual analogue pain scale as subjective pain measurement and an objective pain behavior checklist. Analysis of data was done by use of repeated measure ANOVA, bonferni, t-test, and F-test. The results of this study were summerized as follows : 1) The first hypothesis that the subjective pain score of intraveneous injection pain in the experimental period with cutaneous stimulation will be lower than in the control period was rejected. 2) The second hypothesis that the objective pain behavior score of intravenous injection pain in the experimental period with cutaneous stimulation will be lower than in the control period was accepted(F=24.23, p=0.0001, Bornferni p<.05). 3) The third hypothesis that the subjective pain score of intraveneous injection pain in the experimental period with distraction will be lower than in the control period was rejected. 4) The fourth hypothesis that the objective pain score of intravenous injection pain in the experimental period with distraction will be lower than in the control period was accepted(F=24.23, p=0.0001, Bornferni p<.05). 5) The fifth hypothesis that the subjective pain score of intravenous injection pain in the experimental period with combination of cutaneous stimulation and distraction will be lower than in the control period was accepted(F=3.04, p=0.031, Bonferni p<.05). 6) The sixth hypothesis that the objective pain score of intravenous injection pain in the experimental period with combination of cutaneous stimulation and distraction will be lower than in the control period was accepted(F=24.23, p=0.0001, Bonferni p<.05).

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.97-103
• /
• 2010

The four combustion stages in a diesel engine have close correlation among them. Especially, the ignition delay period has significant effect on the following combustion stage. And the period is also one of inevitable combustion processes in the diesel engine. For example, the diesel knocking is a well-known phenomenon due to the long ignition delay period. The interval of the ignition delay period is affected by the mixture formation process in the cylinder. However, in the case of the D.I. diesel engine, the available duration to make the mixture formation of air-fuel is very short. In addition, the means of the mixture formation mainly depends on the injection characteristics and properties of the fuel. It is difficult to make complete mixture. Therefore, an early stage of combustion is violent, which leads to the weakness of noise and vibration. In this study, using the visible engine, we measured the ignition delay period by photo sensor which detect occurrence of flame and presented the factors of the injection characteristics such as kinds of injection system, the injection pressure and the injection timing. The relation between the ignition delay period and cylinder pressure diagram which was concurrently obtained was also estimated.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권7호
• /
• pp.951-962
• /
• 2010

An experimental study was performed to investigate the improvement of response performance of a turbocharged diesel engine under the operating conditions of low speed and fast acceleration. In this study, the experiment for improving the low speed and acceleration performance is performed by means of injecting air into the intake manifold of compressor exit during the period of low speed and application of a fast acceleration from low speed. The effects of air injection into the intake manifold on the response performance were investigated at various applicant parameters such as air injection pressure, accelerating rate, accelerating time, engine speed and load. The experimental results show that air injection into the intake manifold at compressor exit is closely related to the improvement of turbocharger lag under low speed and accelerating conditions of a turbocharged diesel engine. During the rapid acceleration period, the air injection into the intake manifold of turbocharged diesel engine indicates the improvement of the combustion characteristics and gas pressure in the cylinder. At low speed range of the engine, the effect of air injection shows the improvement of the pressure distribution of turbocharger and combustion pressure during the period of gas exchange pressure.

• 한국수소및신에너지학회논문집
• /
• 제13권3호
• /
• pp.233-241
• /
• 2002

To achieve hydrogen power system with high performance and stable operation, the COVimep of hydrogen fueled engine with direct injection was evaluated with the change of engine speed, injection timing, air-fuel equivalence ratio and spark timing. And the cause of cycle variation was analyzed by using coefficient of variation in combustion period defined in this study. the results showed that the cycle variation of hydrogen fueled engine is mainly dependent on the early combustion period.

• 한국분무공학회지
• /
• 제24권3호
• /
• pp.114-121
• /
• 2019

The effect of injector driving current pattern on fuel injection rate of solenoid diesel common rail injector was studied by computer simulation. The time resolved fuel injection rate and injected quantity per stroke of a common rail injector driven with the five current patterns were computer simulated. The fuel injection rate and injected quantity per stroke according to the rail pressure and fuel injection period were also computer simulated. When the common rail injector was driven with the five driving current patterns of peak & hold, there was no difference in the fuel injection rate in the peak section regardless of all the current patterns of the five cases. On the other hand, the magnitude of the hold current value influenced the injection rate and injected quantity per stroke. That is, in the current pattern of three cases where the hold current value is equal to or more than a constant value of the peak current value, the fuel injection rates for the given common rail rail pressure and injection period are same one another. On the other hand, the current pattern of the two cases, in which the hold current value is smaller than a certain value, there is a large fluctuation in the fuel injection rate.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.73-78
• /
• 1990

1.3${\mu}{\textrm}{m}$ DFB with absorption grating of 1.55${\mu}{\textrm}{m}$ InGaAsP layer was fabricated. This new type of DFB laser shows self-plusation for DC operation. At low level of injection the relation between the pulsation frequency and the injection current shows similar behavior with the relaxation oscillation of ordinary laser and at high level of injection the pulsation frequency decreases compared to the relaxation oscillation. Period doubling, period 3 and 4 were observed for AC modulation. In case of period doubling the waveform shows only one pulse within a period without any accompanying subsidiary pulses and the oscillation frequency was quite stable. The pulse widths as short as 58.5 ps was achieved with AC modulation. We propose the time division multiplexing application of this kind of DFB laser.

• 한국축산식품학회지
• /
• 제38권2호
• /
• pp.325-337
• /
• 2018

This study was conducted to evaluate the effects of pre and post-rigor marinade injections on some quality parameters of Longissimus dorsi (LD) muscles. Three marinade formulations were prepared with 2% NaCl, 2% NaCl+0.5 M lactic acid and 2% NaCl+0.5 M sodium lactate. In this study marinade uptake, pH, free water, cooking loss, drip loss and color properties were analyzed. Injection time had significant effect on marinade uptake levels of samples. Regardless of marinate formulation, marinade uptake of pre-rigor samples injected with marinade solutions were higher than post rigor samples. Injection of sodium lactate increased pH values of samples whereas lactic acid injection decreased pH. Marinade treatment and storage period had significant effect on cooking loss. At each evaluation period interaction between marinade treatment and injection time showed different effect on free water content. Storage period and marinade application had significant effect on drip loss values. Drip loss in all samples increased during the storage. During all storage days, lowest CIE $L^*$ value was found in pre-rigor samples injected with sodium lactate. Lactic acid injection caused color fade in pre-rigor and post-rigor samples. Interaction between marinade treatment and storage period was found statistically significant (p<0.05). At day 0 and 3, the lowest CIE $b^*$ values obtained pre-rigor samples injected with sodium lactate and there were no differences were found in other samples. At day 6, no significant differences were found in CIE $b^*$ values of all samples.

• 한국동물생명공학회지
• /
• 제35권3호
• /
• pp.273-278
• /
• 2020

The milk fever and mastitis that occur during the colostrum period in dairy cattle cause great damage in the dairy industry by causing a rapid decline in the cattle's health and decreasing milk production. In order to prevent this, gradual milking (GM), calcium injection with gradual milking (CG), and calcium injection with complete milking (CC) methods are used. However, differences in effectiveness between these methods have not been established. Therefore, this study was conducted to determine the effects of each preventive method on milk fever and mastitis. The results of this study showed that while there was a significant negative correlation of GM with milk fever and mastitis (r = -0.657, p < 0.05), there was no correlation of CG and CC with milk fever and mastitis. The incidence of milk fever was significantly lower in CG and CC than in GM (p < 0.05) but no differences in the incidence of mastitis were observed between the three groups. No significant differences in the rate of recovery from milk fever and mastitis were observed between the three groups. The recurrence rate of milk fever was significantly higher in CG and CC than in GM (p < 0.05), though no differences in the recurrence rate of mastitis were observed. This study showed an inverse relationship between the incidence rates of milk fever and mastitis when calcium injection was not used during the colostrum period. When calcium injections were used, the incidence of milk fever was reduced without affecting the incidence of mastitis regardless of the milking method, but the recurrence rate of milk fever was increased. The results of this study would be useful for controlling blood calcium concentrations and establishing efficient milking strategy in order to effectively prevent milk fever and mastitis in dairy cattle during the colostrum period.

• 동의생리병리학회지
• /
• 제35권6호
• /
• pp.219-227
• /
• 2021

The purpose of this study is to analyze the side effects (ADR) of Traditional Chinese Medicine (TCM) injections by age, injection type, symptoms, and causes, and to find preventive solutions for ADR. For the ADR of TCM injection data collected during the search period from January 1, 2010 to December 31, 2020, the correlation between each section was analyzed by subdividing it into age, injection type, symptoms and causes. CNKI, PubMed, and EMBASE were used to collect the clinical data. 'Chinese herbal injection', 'Traditional Chinese Medicine injection', 'Chinese herbal injection side effect', 'Chinese herbal injection adverse drug reaction' were used for the keyword from the database. All data were collected mainly for TCM injection and the causes of ADR due to TCM injection. However, data not related to the relevant study or TCM injection were excluded from this study. Among a total of 941 studies collected during the search period from January 1, 2010 to December 31, 2020, a total of 10 studies were selected for final analysis. In 1462 clinical data sets, ADR by gender was higher in males than females. By age, 41 to 60 years were the most common. The incidence of ADR by injection type was highest in the blood regulating injection type. Data analysis showed Xueshuantong injection had the highest ADR. Among the symptoms of ADR, skin diseases were the most common. The most common cause of ADR was the unreasonable use of drugs. In China, for ADR management, the use of TCM injections is recommended according to the basic principles for the clinical use of TCM injections established by the Chinese government. In this study, we analyzed the current status and causes of ADR in TCM injections, and found a preventive solution. It is expected that it can be used as basic data to increase the usability of pharmacopuncture and herbal medicines in Korea in the future.

• 한국자동차공학회논문집
• /
• 제18권6호
• /
• pp.46-52
• /
• 2010

In this paper, emission analysis during cold start period of CVS-75 mode in LPG vehicle was performed to find out proper operating conditions of SAI(Secondary Air Injection) system. In order to meet SULEV target, the simulated emission system had a SAI system as well as a MCC(Manifold Catalytic Converter) and a UCC(Under body Catalytic Converter). Using commercial 1-D code AMESIM, in which 7 step global surface chemical reactions of Langmuir-Hinshelwood type were adopted, transient emission analysis in the exhaust system during cold start period of CVS-75 mode were carried out to figure out the effects of flow rate, duration of supply air on HC, CO, NO emission.