• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.9
• /
• pp.4773-4776
• /
• 2012

Objectives: To assess the efficacy, side effects, and the impact on quality of life with $Qinin^{(R)}$ (Cantharidin sodium) injection combined with chemotherapy for gastric cancer patients. Method: A consecutive cohort of 70 patients were divided into two groups: experimental group with cantharidin sodium injection combined with chemotherapy, while the control group received chemotherapy alone. After more than two courses of treatment, efficacy, quality of life and side effects were evaluated. Results: The response rate of experimental group was not significantly different from that of the control group (P>0.05), but differences were significant in clinical benefit response and KPS score. In addition, gastrointestinal reactions and the incidence of leukopenia were lower than in the control group (P<0.05). Conclusions: $Qinin^{(R)}$ (Cantharidin sodium) injection combined with chemotherapy enhances clinical benefit response, improving quality of life of gastric cancer patients and reducing side effects of chemotherapy. Thus $Qinin^{(R)}$ (Cantharidin sodium) injection deserves to be further investigated in randomized control clinical trails.

• Journal of Environmental Health Sciences
• /
• v.20 no.3
• /
• pp.61-77
• /
• 1994

Sprague Dawley rats were exposed to electric fields (6,000 V, 10 kV/m, 30 min/day, 6 days per week) and injected strontium 90 (681 kbq/rat, one time) through abdominal cavity (strontium 90 and electric field complexed exposure group). In parallel, series with the electric field exposure only, strontium 90 injection only and control groups were run. Every group was consisted of 110 rats (55 male and 55 female). This animal experiment was performed from May to December in 1993. This results were conducted to investigate the effect of electric field for 11 weeks. The results are summarized as follows: 1. Ornithine decarboxylase (ODC) activity in rat's bone marrow cells: The ODC values was significantly increased in Sr$^{90}$ injection group and Sr$^{90}$ and electric field complexed exposure group as compared with that of control group (p<0.05). The ODC value was significantly decreased in electric field and Sr$^{90}$ complexed exposure group in comparison with Sr$^{90}$ injection group (p<0.05). The ODC values of electric field only exposure group was not different to that of control group (p>0.05). 2. The amount of Sr$^{90}$ accumulation in the femur, kidney and spleen:The accumulation amount of Sr$^{90}$ in the femur of Sr$^{90}$ injection group represented higher value than that of electric field and Sr$^{90}$ complexed exposure group (p<0.05). In the kidney and spleen, the difference between electric field and Sr$^{90}$ complexed exposure group and Sr$^{90}$ injection group wasn't observed. 3. The counts of white cells in blood of Sr9?injection group was decreased as compared with the value from control group and electric field and Sr$^{90}$ complexed exposure group (p<0.05). The rat's body weight, red blood cell counts and the weight data of liver, kidney and spleen did not show differences among four groups.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.1-8
• /
• 2002

For gasoline engines, a three-way catalytic converter that has the maximum efficiency at stoichiometric air/fuel ratio is used to clean up the exhaust gas. So a precise air/fuel ratio control is necessary to maximize the catalytic conversion efficiency, For a transient condition, a fred-forward air/fuel ratio control method that estimates the air mass inducted into a cylinder is being used. In this study, a fuel injection map that makes an accurate air/fuel ratio control possible was constructed for the very same transient condition. For the same condition above, intake air model and fuel model were refined so that fuel injection values based on air mass through a throttle valve and intake manifold pressure are equal to the map values.

• Journal of Power Electronics
• /
• v.13 no.4
• /
• pp.669-678
• /
• 2013

This paper proposes a sensorless control approach for Wound Rotor Synchronous Machines (WRSMs) based on a high frequency voltage signal injection into the stator side U phase and VW line, respectively. Considering the machine itself as a rotor position sensor, the rotor position observer is established according to the principles of the rotary transformer. A demodulation method for the high frequency signal inducted in the rotor is proposed as well. Simulation and experimental results show that the proposed sensorless control approach has high performance and good practicability.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1582-1591
• /
• 2014

This paper presents a hybrid sensorless control for an interior permanent magnet synchronous motor (IPMSM) for zero-, low-, and high-speed regions. Many sensorless control methods such as an observer-based estimator have been introduced. However, most of the observer-based estimators have a disadvantage at start-up and in the low-speed region. To solve this problem, a simple strategy of using a hybrid system is proposed by integrating a high-frequency (HF) signal injection method and a full-order flux observer. In addition, an HF signal injection method with only a low pass filter (LPF) is proposed to simplify the hybrid system. The hybrid system achieves high-performance drive throughout the entire speed range. The effectiveness of the proposed hybrid technique is verified by experiments using an 11-kW IPMSM drive system.

• Journal of Drive and Control
• /
• v.13 no.2
• /
• pp.51-58
• /
• 2016

The present study deals with the issue of clamping force control of an injection molding machine using 2-way cartridge valve based logic circuit. The operating principle for the cartridge valve is described with its construction and static opening behavior. Basic module circuits are designed first and analysed according to the basic functions. Then they are combined with a virtual design model for the clamping mechanism to simulate the control performance of the overall system. The backlash inherent in the mechanism is considered while evaluating the time-delay in the process of clamping force build-up. The effects of a couple of design parameters in backlash, i.e., interval and stiffness have been demonstrated in the time-domain.

• Journal of Pharmacopuncture
• /
• v.18 no.3
• /
• pp.42-48
• /
• 2015

Objectives: The aim of the study is to investigate both the single-dose intramuscular injection toxicity and the approximate lethal dose of water-soluble Carthami-flos and Cervi cornu parvum pharmacopuncture (WCFC) in male and female Sprague-Dawley (SD) rats. Methods: The study was conducted at Biotoxtech Co. according to the Good Laboratory Practice (GLP) regulation and the toxicity test guidelines of the Ministry of Food and Drug Safety (MFDS) after approval of the Institutional Animal Care and Use Committee. Dosages for the control, high dose, middle dose and low dose groups were 0.5 mL/animal of saline and 0.5, 0.25 and 0.125 mL/animal of WCFC, respectively. WCFC was injected into the muscle of the left femoral region by using a disposable syringe (1 mL, 26 gauge). The general symptoms and mortality were observed 30 minutes, 1, 2, 4, and 6 hours after the first injection and then daily for 14 days after the injection. The body weights of the SD rats were measured on the day of the injection (before injection) and on the third, seventh, and fourteenth days after the injection. Serum biochemical and hematologic tests, necropsy examinations, and histopathologic examinations at the injection site were performed after the observation period. Results: No deaths, abnormal clinical symptoms, or significant weight changes were observed in either male or female SD rats in the control or the test (0.125, 0.25, and 0.5 mL/animal) groups during the observation period. No significant differences in hematology and serum biochemistry and no macroscopic abnormalities at necropsy were found. No abnormal reactions at injection sites were noted on the topical tolerance tests. Conclusion: The results of this single-dose toxicity study show that WCFC is safe, its lethal doses in male and female SD rats being estimated to be higher than 0.5 mL/animal.

• Women's Health Nursing
• /
• v.22 no.2
• /
• pp.78-85
• /
• 2016

Purpose: The purpose of this study was to evaluate the effect of abdominal massage on alleviating pain caused by the injection of recombinant gonadotropin for In Vitro Fertilization (IVF) among infertile women. Methods: This study employed a nonequivalent control group non-synchronized design. A total sample of 149 infertile women who never experienced in vitro fertilization was recruited at C fertility center. Seventy women were assigned into experimental group and 79 into controls. The experimental group had been informed to do abdominal massage prior to the injection and to record their subjective pain using visual analogue scale. The control group had been informed to record their subjective pain in the same way just after the injection. Results: Compared to the pre-tested pain scores, the pain scores in experimental group were significantly reduced by 0.7 points, whereas the control group increased by 0.9 points (t=-4.55, p=.001). Conclusion: This study confirms that the use of abdominal massage prior to the injection is an effective way to alleviate pain on injection site. This massage may be a useful intervention for infertile women about pain alleviation.

• Food Science of Animal Resources
• /
• v.38 no.6
• /
• pp.1155-1159
• /
• 2018

Foot-and-mouth disease (FMD) is an infectious disease affecting pigs. The control of FMD in swine husbandry is very important because its outbreak results in a vast economic loss. FMD vaccination has effectively controlled FMD; however, it results in economic loss associated with the incidence of lesions in the pork meat at the injection site. The objective of this study was to investigate the effects of transdermal needle-free injection (NFI) of the FMD vaccine on the incidence of lesions at the injection site. Pigs (n=493) in the control group were vaccinated with the FMD vaccine using a commercial syringe needle, while 492 pigs in the transdermal NFI group received the FMD vaccine using a needle-free gas-powered jet injector. After the slaughter of the pigs, the incidence of lesions at the injection site of all pigs was checked by plant workers. The result of this study showed that the incidence of lesions in the pork ham from pigs vaccinated with NFI was 14.82% lower than that in control pigs (p<0.01). In addition, lesions generated in the NFI group were found just in the subcutaneous tissue. Therefore, the incidence of lesions at the injection site in pork from pigs vaccinated with the FMD vaccine can be effectively reduced by using transdermal NFI rather than a conventional syringe needle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.76-82
• /
• 2007

This paper described the effect of the multiple injections on the stability of combustion and emission characteristics in a direct injection diesel engine at various operating conditions. In order to investigate the influence of multiple injections in a diesel engine, the fuel injection timing was varied one main injection and two pilot injections at various conditions. The experimental apparatus consisted of DI diesel engine with four cylinders, EC dynamometer, multi-stage injection control system, and exhaust emissions analyzer. The combustion and emission characteristics were analyzed for the main, pilot-main injection, pilot-pilot-main injection strategies. It is revealed that the combustion pressure was smoothly near the top dead center and the coefficient of variations is reduced due to the effect of pilot injection. Also, $NO_x$ emissions are dramatically decreased with pilot injection because the decrease of rate of heat release. However, the soot is increased at early pilot injection and main injection.