• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.83-88
• /
• 2007

횡단류 아음속 유동장에서 연료의 가진 수직 분사 시 나타나는 액적영역의 분무특성에 대하여 고속 카메라 촬영기법을 통하여 분석하였다. 본 연구의 목적은 정상 분무와 가진 분무의 분열길이 및 궤적을 관찰하고 가진 분무의 주파수 크기가 커지는 영향이 분무특성에 미치는 영향을 확인하는 것이다. 실험을 통하여 정상 분무와 가진 분무의 궤적과 분열길이가 차이를 연구하였다.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.11-18
• /
• 2001

To clarify the influence of SAC shape of hole-type diesel nozzle on injection characteristics and spray patterns, the injection rate of three nozzle types(standard SAC nozzle, Needle-cut VCO nozzle and VCO nozzle) were measured by Zeuch's method and pictures of the sprays were taken by CCD camera. As the pump speed became higher, the injection characteristics of the three nozzles were different. Injection rate and perssure curves at the high pressure pipe in Needle-cut VCO nozzle were much more similar to the VCO nozzle than those of the SAC nozzle. When the needle was at pre-lift period for all speeds, the spray of the Needle-cut VCO nozzle showed almost the same shape as the SAC type nozzle. There was no differense in spray pattern at the needle full-lift periods.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.76-85
• /
• 1999

GDI(Gasoline Direct Injection( engine technology is well known as a new technology since it can improve fuel consumption and meet future emission regulations. But the GDI has many difficulties to be solved, such as complexity of injection control mode, unburned hydrocarbon, and restricted power. A 2-D shape combustion chamber was adopted to investigate mixture formation and combustion characteristics of GDI engine. Spray and combustion experiments were performed by changing the injection timing. injection pressure an din-cylinder flow in Rapid Compression and Expansion Machine(RCEM).Through the experiments, the detailed characteristics of fuel spray and combustion was analyzed by visualizing the in-cylinder phenomena according to the change of injection condition, and the optimal fuel injection timing and fuel injection pressure were obtained.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.90-97
• /
• 2015

Optimization of multi-quality characteristics in injection molded parts is very important, but it is sometimes difficult for part/mold designers. The objective of this study is to develop a practical design methodology for optimizing two-quality characteristics of injection molded parts. To attain this end, we developed a new design-range reduction algorithm based on Taguchi's orthogonal arrays for two characteristics. Then, the algorithm was integrated with commercial injection-molding simulation tools. A feature of the proposed methodology is that it allows field-designers unfamiliar with general optimization methods to be able to apply the methodology to their design problems with ease. Finally, we have applied the proposed design methodology to optimization of weldlines and deflections in an actual bezel model. The results show the usefulness of this methodology.

• 한국분무공학회지
• /
• 제16권1호
• /
• pp.44-50
• /
• 2011

An object of this study is to understand the correlation of injection characteristics and injector dimensions according to biodiesel mixture. The Injection characteristics of different types of common-rail injectors are the number of nozzle holes (5~8), jet cone angle ($146^{\circ}{\sim}153^{\circ}$), hydraulic flow rate (830~900 ml/min) injection quantity and response time. Prior to characteristic experiment, the reference injector has been selected in 6 candidates injectors under the investigation of injected quantity according to the biodiesel mixture so that injector type can be determined. The injector is used for the characteristic experiment which varied the various operating conditions including pressure 23 MPa, 80 MPa, 160 MPa, changing in injection duration 0.16 ms~1.2 ms and even mixture ratio. The result shows that the nozzle hole number and cone angle influence the injection quantity much more than nozzle hole diameter at low injection pressure and the nozzle hole diameter at high injection pressure, post injection duration.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.66-69
• /
• 2004

We have investigated the spectral characteristics of semiconductor lasers locked to the external light injected from a modulated laser. The numerical model for semiconductor lasers under the external optical injection is based on the Lang's equation and has been extended in order to take into account the simultaneous injection of the multiple sidebands of the current-modulated laser. In this paper, we have analyzed characteristics of semiconductor laser using optical injection locking

• 한국항공우주학회지
• /
• 제30권6호
• /
• pp.61-68
• /
• 2002

초음속 유동장 내 수소 연료의 이중 분사가 갖는 연소 특성에 대한 수치연구를 수행하였다. 연료 이중 분사 유동 구조를 수치적으로 모사하기 비평형 화학반응을 포함한 3차원 Navier-Stokes 방정식과 k-$\omega$ SST난류 모델을 사용하였다. 이중 분사기 사이의 변화에 따른 연소특성의 변화를 이해하기 위해서 파라메터 연구를 수행하였다. 이중 수직분사의 연소특성은 단일 수직분사의 연소특성과 상당히 다른 양상을 보이는 것으로 나타났다. 이중 분사에서 두 분사유동의 연소특성은 서로 다른 것으로 나타났는데, 후방 분사류의 연소 특성은 전방 분사류의 유동 및 연소특성에 크게 영향을 받는 것으로 밝혀졌다. 분사기 사이의 거리가 어떤 특정 거리가 되기 전까지 증가할수록 연소율이 증가하는 것으로 나타났다. 하지만, 그 이후에는 연소율의 증가가 관찰되지 않았으며 오히려 정체압력의 감소가 커져서 전체적인 연소특성은 악화되는 것으로 나타났다. 이는 최적의 연소특성을 위한 두 분사기 사이의 거리가 존재함을 의미하는 것으로 판단된다.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.106-113
• /
• 2016

Lean burn engine, classified into port injection and direct injection, is recognized as a promising way to meet better fuel economy. Especially, LPG direct injection engine is becoming increasingly popular due to their potential for improved fuel economy and emissions. Also, LPDi engine has the advantages of higher power output, higher thermal efficiency, higher EGR tolerance due to the operation characteristics of increased volumetric efficiency, compression ratio and ultra-lean combustion scheme. However, LPDi engine has many difficulties to be solved, such as complexity of injection control mode (fuel injection timing, injection rate), fuel injection pressure, spark timing, unburned hydrocarbon and restricted power. This study is investigated to the influence of spark timing, fuel injection position and fuel injection rate on the combustion stability of LPDi engine. Piston shape is constituted the bowl type piston. The characteristics of combustion is analyzed with the variations of spark timing, fuel injection position and fuel injection rate (early injection, late injection) in a LPDi engine.

• 한국분무공학회지
• /
• 제28권4호
• /
• pp.169-175
• /
• 2023

Multi-injection scheme is being applied to GDI combustion to reduce PM and PN emission to meet the EU7 regulation. However, very short injection duration encounters the ballistic injection region, which injection quantity does not increase linearly with injection duration when applying multi-injection. In this study, numerical studies were conducted to reveal the cause of ballistic injection and the effect of design parameters on ballistic region using 1-D simulation, AMESim. Injection rate and injection quantity were compared with experiment to validate the established model, which showed the accuracy with 10% error. The model revealed that the tendency of ballistic region coincides with the needle motion behavior, which means that parameters at the upper part of needle such as electro-magnetic force, needle spring force and needle friction force have dominant effect on ballistic injection. To figure out the effect of electro-magnetic and needle friction force on ballistic, those parameters were varied to plus and minus 10% with model. The result showed that those parameters clearly changed the ballistic region characteristics, however, the impact became insignificant for outside of ballistic region, which means that the ballistic injection is mainly influenced by initial motion of injector needle.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.457-460
• /
• 2010

we have analyzed tens of Giga pulse signal generation using sideband injection locking scheme. The numerical model for semiconductor lasers under the strong optical injection is based on the Lang's equation and has been extended in order to take into account the simultaneous injection of the multiple sidebands of the current-modulated laser. The numerical simulation results show that the unselected sidebands will affect the optical and RF-spectral characteristics even though the semiconductor laser is locked to the target sidebands.