• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.58-63
• /
• 2006

BTL 방식의 민간투자사업의 경우 많은 관심과 정부의 추진의지에 의해 급성장을 하고 있음에도 불구하고 도입당시 예상치 못했던 다양한 문제점같이 나타나고 있는 실정이다. 이에 본 연구에서는 이러한 문제점들 중 사업 전(全)단계에 걸쳐 발생할 수 있는 리스크에 대한 관리 능력 및 관리 계획을 개선하기 위하여 리스크 인자별 프로젝트에 대한 영향도를 실제 사례에 대한 민감도 분석을 통하여 제시하고자 하였다. 본 연구는 향후 민간투자사업의 리스크관리에 대한 대처 방안을 연구하는데 있어 리스크 관리의 우선순위를 제시해 줄 수 있을 뿐 아니라 위험이 사업에 미치는 영향을 구조화함으로써 주무관청과 민간사업자 사이에서 발생할 수 있는 리스크분담에 대한 기준을 제시해 줄 수 있을 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.3017-3029
• /
• 2023

In the late in-vessel phase of a nuclear reactor severe accident, the internal heat transfer and crust evolution during the debris bed melting process have important effects on the thermal load distribution along the vessel wall, and further affect the reactor pressure vessel (RPV) failure mode and the state of melt during leakage. This study coupled the phase change model and large eddy simulation to investigate the variations of the temperature, melt liquid fraction, crust and heat flux distributions during the debris bed melting process in the hypothetical severe accident of HPR1000. The results indicated that the heat flow towards the vessel wall and upper surface were similar at the beginning stage of debris melting, but the upward heat flow increased significantly as the development of the molten pool. The maximum heat flux towards the vessel wall reached 0.4 MW/m². The thickness of lower crust decreased as the debris melting. It was much thicker at the bottom region with the azimuthal angle below 20° and decreased rapidly at the azimuthal angle around 20-50°. The maximum and minimum thicknesses were 2 and 90 mm, respectively. By contrast, the distribution of upper crust was uniform and reached stable state much earlier than the lower crust, with the thickness of about 10 mm. Moreover, the sensitivity analysis of initial condition indicated that as the decrease of time interval from reactor scram to debris bed dried-out, the maximum debris temperature and melt fraction became larger, the lower crust thickness became thinner, but the upper crust had no significant change. The sensitivity analysis of in-vessel retention (IVR) strategies indicated that the passive and active external reactor vessel cooling (ERVC) had little effect on the internal heat transfer and crust evolution. In the case not considering the internal reactor vessel cooling (IRVC), the upper crust was not obvious.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.57-60
• /
• 2003

The purpose of this study is to investigate the high temperature deformation behavior of Ti-6Al-4V alloy and to predict the final microstructure under given forming conditions. Equiaxed and widmanstatten of Ti-6Al-4V alloys were prepared as initial microstructure and the compression tests were performed to obtain the flow curves at high temperatures (700∼1100$^{\circ}C$) and various strain rates (10$\^$-4/∼10$^2$/s). Form the results of compression test various parameters such as strain rate sensitivity (m) and activation energy (Q) were calculated and used to establish constitutive equations. To predict the final microstructure after forming, finite element analysis was performed considering the microstructural parameters such as the grain size and the volume fraction of second phase.

• 소성∙가공
• /
• 제12권4호
• /
• pp.290-295
• /
• 2003

High temperature deformation behavior and prediction of final microstructure after forming of Ti-6Al-4V alloy were investigated in this study. Equiaxed and Widmanstatten microstructures of Ti-6Al-4V alloys were prepared as initial microstructures and compression tests were performed to obtain the flow curves at high temperatures (700∼110$0^{\circ}C$) and various strain rates (10$^{-4}$ ∼10$^2$/s). From the results of compression test, strain rate sensitivity (m) and activation energy (Q) were calculated and used to establish constitutive equation. To predict the final microstructure after farming, finite element analysis was performed considering the microstructural parameters such as grain size and volume fraction of second phase.

• Nuclear Engineering and Technology
• /
• 제38권3호
• /
• pp.231-238
• /
• 2006

Whole-body exposure to high-dose radiation causes injury involving multiple organs that depends on their sensitivity to radiation. This acute radiation syndrome (ARS) is caused by a brief exposure of a major part of the body to radiation at a relatively high dose rate. ARS is characterized by an initial prodromal stage, a latent symptom-free period, a critical or manifestation phase that usually takes one of four forms (three forms): hematologic, gastrointestinal, or cardiovascular and neurological (neurovascular), depending upon the exposure dose, and a recovery phase or death. One of the most important factors in treating victims exposed to radiation is the estimation of the exposure dose. When high-dose exposure is considered, initial dose estimation must be performed in order to make strategy decisions for treatment as soon as possible. Dose estimation can be based on onset and severity of prodromal symptoms, decline in absolute lymphocyte count post exposure, and chromosomal analysis of peripheral blood lymphocytes. Moreover, dose assessment on the basis of calculation from reconstruction of the radiation event may be required. Experience of a criticality accident occurring in 1999 at Tokai-mura, Japan, showed that ARS led to multiple organ failure (MOF). This article will review ARS and discuss the possible mechanisms of MOF developing from ARS.

• 한국정보처리학회논문지
• /
• 제6권12호
• /
• pp.3490-3499
• /
• 1999

초기하분포 소프트웨어 신뢰성 성장 모델(HGDM)은 최근에 개발되어 테스트와 디버그의 시작 단계에서 소프트웨어에 남아 있는 초기 결함 수를 추정할 수 있는 문제에 성공적으로 적용되고 있다. 그러나 HGDM은 시간 도메인 소프트웨어 신뢰성 성장 모델(SRGM)에 속하지만 시험자 수 등과 같은 시험에 투입하는 자원을 고려하는 과정에서 다른 시간 도메인 SRGM과 비교하기 곤란한 점을 내포하게 되었다. 특히, 시간 도메인 SRGM에서 일반적으로 사용하는 소프트웨어 신뢰성을 계산할 수 없다. 본 논문은 HGDM이 시간에 의해 기술되지 않음으로 인해 생기는 이러한 문제점을 해결하기 위해 이항 반응 계수를 가진 연속 시간형 HGDM을 개발하고 그 특성을 연구한다. 그리고 제안된 모델을 실제 자료에 적용해서 기존 HGDM을 대신하여 사용할 수 있음을 보인다.

• Journal of Trauma and Injury
• /
• 제35권3호
• /
• pp.181-188
• /
• 2022

Purpose: Inferior vena cava (IVC) collapse is related to hypovolemia. Sonography has been used to measure the IVC diameter, but there is variation depending on the skill of the operator and it is difficult to obtain accurate measurements in patients who have a large amount of intestinal gas or are obese. As a modality to obtain accurate measurements, we measured the diameters of the IVC and aorta on trauma computed tomography scans and investigated the correlation between the IVC to aorta ratio and the shock index in blunt trauma patients. Methods: We retrospectively analyzed the medical records of 588 trauma patients who were transferred to the regional trauma center (level 1) of Wonkang University Hospital from March 2020 to February 2021. We included trauma patients 18 years or older who met the trauma activation criteria and underwent trauma computed tomography scans with intravenous contrast within 40 minutes of admission. The shock index was calculated from vital signs before trauma computed tomography scan, and measurements of the anteroposterior diameter of the IVC (AP), the transverse diameter of the IVC (T), and aorta were made 10 mm above the right renal vein in the venous phase. Results: Overall, 271 patients were included in this study, of whom 150 had a shock index ≤0.7 and 121 had a shock index >0.7. The T to AP ratio and AP to aorta ratio were significantly different between groups. Cutoffs were identified for the T to AP ratio and AP to aorta ratio (2.37 and 0.62, respectively) that produced clinically useful sensitivity and specificity for predicting a shock index >0.7, demonstrating moderate accuracy (T to AP ratio: area under the curve, 0.71; sensitivity, 59%; specificity, 87% and AP to aorta ratio: area under the curve, 0.70; sensitivity, 55%; specificity, 91%). Conclusions: The T to AP ratio and AP to aorta ratio are useful for predicting hemorrhagic shock in trauma patients.

• 대한영상의학회지
• /
• 제84권4호
• /
• pp.923-933
• /
• 2023

목적 응급실의 급성신산통을 호소하는 환자에서 피질-수질기 요로조영술 컴퓨터 단층촬영(이하 CT)에서 요로결석 발견을 기존의 CT 요로조영술과 비교하였다. 대상과 방법 이 후향적 연구는 한국의 두 삼차 병원의 응급실에서 CT 요로조영술을 촬영한 253명의 요로결석이 의심된 환자를 대상으로 시행하였다. 임상 병력을 알지 못한채로 두 명의 영상의학과 의사가 독립적으로 CT 요로조영술의 피질-수질기를 판독하여 요로결석에 관한 정보를 기록하였다. 판독자들의 요로결석 발견에 대한 민감도를 측정하였다. 초기 평가 후, 임상 정보를 바탕으로 다시 피질-수질기를 판독하였고 민감도를 측정하였다. 결과 253명 중 150명(59%)이 요로결석이 있었고, 요로결석이 응급실 방문의 원인(의미 있는 요로결석)이었던 사람은 138명(92%)이었고, 요로 폐쇄로 인한 변화를 보인 환자는 124명 (82.7%)이었다. 의미 있는 요로결석에 대해서는 두 판독자의 민감도는 98.6% (136/138)이었다. 요로 폐쇄로 인한 변화가 동반되었을 때의 민감도는 판독자 1은 99.2% (123/124)였고 판독자 2는 100% (124/124)였다. 임상 정보를 바탕으로 다시 판독했을 때 의미 있는 요로결석 발견의 민감도는 판독자 1이 98.6%에서 100%, 판독자 2는 98.6%에서 99.3%로 증가하였다. 결론 CT 요로조영술의 피질-수질기는 급성신산통으로 응급실을 내원한 환자에서 요로결석을 진단하는데 민감하다.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1396-1408
• /
• 2020

Filtered containment venting system (FCVS) is one of the severe accident mitigation systems designed to release containment pressurization to maintain its integrity. The thermal-hydraulic behaviors in FCVSs are important since they affect the operation characteristics of the FCVS. In this study, a representative FCVS was modeled by RELAP5/Mod3.3 code, and the Station BlackOut (SBO) was chosen as an accident scenario. The thermal-hydraulic behaviors of an FCVS during long-term operation with two venting strategies (open-and-close strategy, open-and-non-close strategy) and the sensitivity analysis of important parameters were investigated. The results show that the FCVS can operate up to 250 h with a periodic open-and-close strategy during an SBO. Under the combined effects of steam condensation and water evaporation, the solution inventory in the FCVS increases during the venting phase and decreases during the intermission phase, showing a periodic pattern. Under this condition, the appropriate initial water level is 3-4 m; however, it should be adjusted according to the environment temperature. The FCVS can accommodate a decay heat power of 150-260 kW and may need to feed water for a higher decay heat power or drain water for a lower decay heat power during the late phase. The FCVS can function within an opening pressure range from 450 kPa to 500 kPa and a closing pressure range between 250 kPa and 350 kPa. When the open-and-non-close strategy is adopted, the solution inventory increases quickly in the early venting phase due to steam condensation and then decreases gradually due to the evaporation of water; drying-up may occur in the late venting phase. Decreasing the venting pipe diameter and increasing the initial water level can mitigate the evaporation of the scrubbing solution. These results are expected to provide useful references for the design and engineering application of FCVSs.

• Nuclear Engineering and Technology
• /
• 제28권2호
• /
• pp.103-117
• /
• 1996

본 논문에서는 증기폭발의 전파과정을 해석하기 위한 수학적 모델을 제시하였다. 이 모델은 용융물, 용융파편, 그리고 냉각재 기상과 액상 등 4상 유체의 2차원적인 천이거동을 지배방정식 및 관련상관식의 수치적 해를 구함으로서 예측할 수 있다. 모델에 사용된 주요 상관식은 용융물 분쇄, 냉각재 상변화, 에너지 교환, 그리고 운동량 교환항으로 구성되어 있다. 그리고, 냉각재(물)의 상태방정식은 냉각재의 기상과 액상 사이의 열역학적 인 비평형을 허용할 수 있는 독특한 형태로 구성되었다. 주석 /물의 중기폭발에 대한 예제계산을 수행한 결과 본 모델이 폭발의 전파속도 및 압력 -비록 그 정량적인 값은 관련상관식의 인자들에 좌우되지마는- 등의 증기폭발 전파과정의 주요현상을 적절히 모사할 수 있음을 알 수 있었다. 또한 중요한 초기변수(중기 분율, 용융물 분율) 및 관련상관식에 대한 민감도 분석도 수행되었다.