• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.12
• /
• pp.1882-1888
• /
• 2019

Objective: An experiment was conducted to evaluate the effects of increasing levels of crude glycerin (0%, 6%, 12%, and 18%) used as a substitute for corn in lamb feed on the quantitative characteristics of the carcass. Methods: A total of 40 crossbred Santa $In{\hat{e}}s$ lambs that were four months old with a mean initial weight of $21.0{\pm}0.8kg$ were randomly distributed in four treatments with ten replicates. The animals were slaughtered after 66 days of confinement. The effects of crude glycerin as a replacement for corn in the diet of the lambs on the carcass characteristics, commercial cut weight and yield and carcass measurements were studied. Results: There was an increasing linear effect for body weight at slaughter with the replacement of corn by crude glycerin. The dry matter and metabolizable energy intakes, weight of the empty body, hot carcass weight and cold carcass weight showed a quadratic effect, with maximum crude glycerin levels estimated at 10.9%, 9.8%, 10.83%, 11.78%, and 11.35%, respectively. The initial pH was not influenced by the replacement of corn for crude glycerin, while the final pH presented a quadratic effect. The other parameters of the carcass and the weights and yields of commercial cuts were not influenced. There was also no effect of the diets on carcass morphometric measurements, except for the thoracic perimeter and the carcass compactness index, which presented quadratic and linear effects, respectively. Conclusion: Crude glycerin can replace up to 18% of corn because it favours muscle tissue deposition without promoting changes in the main carcass characteristics of lambs.

• Archives of Obesity and Metabolism
• /
• v.1 no.1
• /
• pp.4-13
• /
• 2022

Currently, pharmacotherapy is becoming essential for obesity, owing to its expanding and increasing epidemiology. In this review, novel peptide-based drugs of four classes are covered: GLP-1 receptor agonist, GIP/GLP-1 receptor dual agonist, glucagon/GLP-1 receptor dual agonist, and a combination of amylin receptor agonist/GLP-1 receptor agonist. Semaglutide is a next-generation GLP-1 receptor agonist with a longer duration and stronger weight and glucose reduction effects than liraglutide and dulaglutide. In the STEP1 trial, semaglutide 2.4 mg reduced body weight by approximately 15% in people with obesity with similar or milder adverse events than liraglutide 3.0 mg. Tirzepatide, a GIP/GLP-1 receptor dual agonist, also has a long duration and strong weight- and glucose-lowering effect. According to SURPASS-2, 3, and 4, in patients with BMI≥25 kg/m² and type 2 diabetes mellitus (T2DM), tirzepatide 15 mg reduced the initial body weight by >13%. Cotadutide, a glucagon/GLP-1 receptor dual agonist, showed weaker weight-lowering effects than semaglutide and tirzepatide, while it was comparable to that of liraglutide in a phase 2 clinical trial for non-alcoholic fatty liver disease in patients with BMI≥25 kg/m² and T2DM. Additionally, its effect on the liver was noticeable. The long-acting amylin receptor agonist cargrilintide combined with semaglutide can be another effective option for obesity treatment. Even in a small phase 1 trial with a short study period of 20 weeks, cargrilintide 2.4 mg/semaglutide 2.4 mg reduced by 17% of initial body weight in people with BMI 27-39.9 kg/m². In coming several years, semaglutide, tirzepatide, and cargrilintide/semaglutide will become available for obesity treatment in Korea.

• Journal of the Korean Ceramic Society
• /
• v.36 no.9
• /
• pp.991-996
• /
• 1999

Effect of solution property on the weight varation and microstructural change of film was studied by electrophoretic deposition in order to obtain a homogeneous and dense zirconia film. As a result of weight kinetics of film which obtained in alcohol or aqueous solution having different polarity experimental data showed large deviation from theoretical ones calculated by Zhang's kinetic model. It had been shown that the weight affecting factors was largely dependent on properties other than dielectric constant and viscosity of solvent zeta potential appiled field and time. In initial stage a main factor of the drastic weight increase was the capillary drag of porous substrate. The cause of weight decrease with time in aqueous solution after 300 s was attributed to the defect of film by sagging and electrolytic reaction. The electrolyte film which prepared in alcohol solution with good wetting for substrate had better homogeneous and dense microstructure than one in aqueous solution with high surface tension.

• Journal of Information Processing Systems
• /
• v.15 no.3
• /
• pp.655-669
• /
• 2019

Supplier evaluation is of great significance in green supply chain management. Influenced by factors such as economic globalization, sustainable development, a holistic index framework is difficult to establish in green supply chain. Furthermore, the initial index values of candidate suppliers are often characterized by uncertainty and incompleteness and the index weight is variable. To solve these problems, an index framework is established after comprehensive consideration of the major factors. Then an adaptive weight D-S theory model is put forward, and a fuzzy-rough-sets-AHP method is proposed to solve the adaptive weight in the index framework. The case study and the comparison with TOPSIS show that the adaptive weight D-S theory model in this paper is feasible and effective.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.3
• /
• pp.433-438
• /
• 2005

This investigation was undertaken in order to elicit the relationship between the extent of ultrafiltration processing of whey and its effect on composition and yield of resultant whey protein concentrate (WPC). Cheddar cheese whey was fractionated through ultrafiltration to an extent of 70, 80, 90, 95, 97.5% and 97.5% volume reduction followed by I stage and II stage diafiltration. After each level of ultrafiltration, the composition of WPC was monitored. Similarly, the initial whey was adjusted to 3.0, 6.2 and 7.0 pH levels and ultrafiltration was carried out to elicit the effect of pH of ultrafiltration on the composition. Further, initial whey was adjusted to different levels of whey protein content ranging from 0.5 to 1.0 per cent and subjected to ultrafiltration to different levels. The various range of retentate obtained were further condensed and spray dried in order to assess the yield of WPC per unit volume of whey used and the quantity of whey required to produce unit weight of product. With the progress of ultrafiltration, there was a progressive increase in protein content and decrease in lactose and ash content. The regression study led to good relationships with $R^2$ values of more than 0.95 between the extents of permeate removed and the resultant changes in composition of each of the constituents. Whey processed at pH 3.0 had significantly a very low ash content and high protein content as compared to processing at 6.2 and 7.0. The yield of WPC per unit volume of whey varied significantly with the initial protein content. Higher initial protein content led to higher yield of all ranges of WPC and the quantity of whey required per unit weight of spray dried WPC significantly reduced. Regression equations establishing the relationship between initial protein content of whey and the yield of various types of WPC have been derived with very high $R^2$ values of 0.99. This study revealed that, the yield and composition of whey can be monitored strictly by controlling the processing parameters and WPC can be produced depending on the food formulation requirement.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.11
• /
• pp.761-767
• /
• 2019

In the present study, analyses of initial behavior of an air-launched projectile for varying initial conditions are performed by coupling computational fluid dynamics and 6 degrees of freedom calculations. Accuracy of the present numerical methods is validated by comparing the present result with the measured data. Launching safety analyses are carried out for various ejecting conditions by considering weight of the projectile and magnitude of front and rear ejector forces as the major parameters of initial behavior of the projectile. A response surface of the projectile launching safety is obtained in the range of the major parameters. In all the conditions of zero rear ejector force, unsafe launching behavior is observed. As the weight of the projectile decreases, the initial launching behavior becomes more unsafe.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.2
• /
• pp.15-22
• /
• 2022

This study has been conducted to investigate the appropriate mixed sowing rates with white clover (Trifolium repens) and Kentucky bluegrass (Poa pratensis) by evaluating initial growth. Six different mixed sowing rates (CT, Control Trifolium repens; CP, Control Poa pratensis; T1P3, Trifolium repens 1 : Poa pratensis 3; T1P2, Trifolium repens 1 : Poa pratensis 2; T1P1, Trifolium repens 1 : Poa pratensis 1; T2P1, Trifolium repens 2 : Poa pratensis 1; T3P1, Trifolium repens 3 : Poa pratensis 1) with three repetitions were implemented in greenhouse experiment plastic pots (50.5 length × 35.0 width × 8.5 cm height). Plant height, leaf length, leaf width, number of leaves, root length, fresh weight, and dry weight were measured after a week from the germination for three months. Initial growth of Kentucky bluegrass significantly increased as mixed sowing rates with increasing, while that of white clover kept relatively decreasing than that in Control. Initial growth strongly affected sowing mixed rates by Kentucky bluegrass and not by white clover in this experiment, indicating that grasses played a dominant role during initial growth period. However, seeding rates with white clover will be dependent on the use of a turf and the desired green cover. There remains a need to further study of the mechanisms and dynamics of legume and grass competition to underpin sustainable management practices.

• KSBB Journal
• /
• v.9 no.1
• /
• pp.1-7
• /
• 1994

A qualitative study was made on the mechanism of dextran synthesis by dextransucrase. Enzymatic synthesis of dextran was experimentally studied with initial sucrose concentration from 50g/$\ell$ to 150g/$\ell$. The molecular weight distribution of synthesized dextran was measured by using on-line gel Permeation chromatographic system Sucrose was observed not to work as a primer within the range of concentration tested. At the initial sucrose concentration of 50g/$\ell$, dextran with molecular weight of medium range ($10^4-2{\times}10^6$) was synthesized due to the mass transfer limitation of sucrose. The amount of the dextran of medium range decreased with the initial sucrose concentration. Dextran was likely to be synthesized by radical chain polymerization mechanism since the dextran of medium range was not produced at higher sucrose concentrations.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.52-65
• /
• 2021

A large amount of time and cost is consumed due to congestions caused by an increasing number of cars which results in a lot of emissions. To overcome these problems, a new electric vertical takeoff and landing (eVTOL) aircraft is being considered. Since vertical take off and landing without a separate runway is realized and electricity is used as a power source, it could solve the saturated ground traffic congestions without emissions. In this paper, the initial sizing was performed based on the Nexus 6HX of Belltextron which is a tilt-ducted fan type. In this study, the electric propulsion system that only uses battery was implemented instead of current Nexus 6HX hybrid electric propulsion. Aerodynamic analyses were performed using OpenVSP and XFLR5. Power-to-weight ratio, wing loading, estimated weight were calculated with these analyses.

• Journal of the Korean Society of Safety
• /
• v.34 no.3
• /
• pp.1-7
• /
• 2019

A variety of composite materials are applied to industries for the realization of light weight and high strength. Fiber-reinforced composites have different strength and range of application depending on the weaving method. The mechanical performance of CFRP(Carbon Fiber Reinforced Plastic) in many areas has already been demonstrated. Recently, the application of hybridization has been increasing in order to give a compensation for brittleness of CFRP. Target materials are UHMWPE (Ultra High Molecular Weight Polyethylene), which has excellent cutting and chemical resistance, so it is applied not only to industrial safety products but also to places that lining performance is expected for household appliances. In this study, the CFRP and UHMWPE of plain weave, which are highly applicable to curved products, were molded into laminated hybrid composite materials by autoclave method. The mechanical properties and the mode I failure behavior between the layers were evaluated. The energy release rate G has decreased as the initial crack length ratio increased.