• 융합신호처리학회논문지
• /
• 제19권3호
• /
• pp.97-103
• /
• 2018

본 논문에서는 비정상적인 과도상태에서의 개선된 해상 전투체계 UPS(Uninterruptable Power Supply) 시스템을 다룬다. 기존에는 일시적인 과전압 및 과전류에 대응하기 위하여 서미스터와 바리스터 소자를 사용하고 있지만 시스템 운용 중에 발생하는 비정상 과도전압에는 취약하므로 UPS가 비가용 상태로 되는 경우가 빈번히 발생하였다. 이를 극복하고 UPS 시스템을 보호하기 위하여 본 논문에서는 초기 입력전원 및 운용 중에 발생되는 비정상 과도전압을 감지한 입력 전원 차단회로, 전원제어 시퀀스 개선, 그리고 인버터 및 CPU 오동작 방지 방법 등을 제안한다. 제안된 방법으로 UPS 구현된 시스템은 Programmable AC/DC 발생기를 이용하여 입력전원 가변 시험을 통하여 시뮬레이션을 수행하였으며, 최종적으로 해상 전투체계의 다기능콘솔에 장착하여 현장시험을 통하여 신뢰성과 안정성을 검증하였다.

• 에너지공학
• /
• 제20권4호
• /
• pp.353-357
• /
• 2011

본 연구에서는 AVR 마이크로 컨트롤러를 사용하여 임베디드 태양추적장치를 개발하였다. 본 시스템은 Atmega128 마이크로 컨트롤러, 스텝 모터, 스텝 드라이브 모듈, CdS 센서 그리고 GPS 모듈 및 기타 부품들로 구성되어 있다. 태양추적장치는 광학적 방법과 천문학적인 방법에 의해 작동된다. 최초 태양추적은 천문학적인 계산방법에 의해 얻어진 결과에 따라 이루어지고 CdS에 의해 미세 조정이 이루어진다. 태양추적장치가 설치된 지점에서 GPS는 UTC(Universal Time Coordinated)와 위도 및 경도 데이터를 마이크로 컨트롤러에 전송한다. 전송되어진 데이터에 의해 실시간으로 태양위치, 일출 및 일몰시간이 계산되어 진다. 태양 추적에 필요한 데이터들은 범용 비동기화 송수신기(UART)를 통하여 컴퓨터로 전송 받을 수 있다.

• 아태비즈니스연구
• /
• 제12권1호
• /
• pp.151-163
• /
• 2021

Purpose - The break-even point refers to the point where total profit and total cost coincide, and from this point on, the entrepreneur's decision-making takes a different route. Strategic decisions can be made for more efficient operation and eventually for more likelihood for growth and sustainability if a startup figures out when it recoups the investment and switches to a net profit. Design/methodology/approach - 748 creativity and skill-based sole proprietors in manufacturing industry were examined to demonstrate the effect of the entrepreneur's entrepreneurial experience and education level, the business launch preparation time, or the self-financing on the achievement of break-even point. Findings - While the business launch preparation time lowered the likelihood of reaching a break-even point, self-financing increased the likelihood. As a result of further analysis by subdividing into subgroups according to skill level, only the business launch preparation time was statistically significant in the highly skilled industries. In the low skilled industries, in addition to the business launch preparation time, the CEO's education level and the self-financing were statistically significant. Research implications or Originality - The longer the business launch preparation time, the higher the start-up cost, which increases the burden of initial cost recovery, and the agile response to market changes is thereby delayed, resulting in the business idea losing its appeal. Self-financing not only provides stability and strong motivation for the business operation but also promotes careful spending which contributes to the achievement of break-even point. In particular, it is found that practical experience is more useful than theoretical knowledge in low skilled industries. Due to the limitation of secondary data based on the recollection, the time required to reach a break-even point, percentage of financing sources, etc. may include cognitive errors. In addition, variables are not included that explain the characteristics of creativity and skill-based sole proprietorship, so it is necessary to exercise caution with the actual application.

• 전기학회논문지
• /
• 제67권5호
• /
• pp.635-643
• /
• 2018

This paper propose a method to identify the motor parameters and improve input voltage error which affect the low speed position error of the back-emf(back electromotive force) based sensorless algorithm and to secure the operation reliability and stability even in the case where the load fluctuation is severe and the start and low speed operation frequently occurs. In the model-based observer used in this paper, stator resistance, inductance, and input voltage are particularly influential factors on low speed performance. Stator resistance can cause resistance value fluctuation which may occur in mass production process, and fluctuation of resistance value due to heat generated during operation. The inductance is influenced by the fluctuation due to the manufacturing dispersion and at a low speed where the change of the current is severe. In order to find stator resistance and inductance which have different initial values and fluctuate during operation and have a large influence on sensorless performance at low speed, they are commonly measured through 2-point calculation method by 2-step align current injection. The effect of voltage error is minimized by offsetting the voltage error. In addition, when the command voltage is used, it is difficult to estimate the back-emf due to the relatively large distortion voltage due to the dead time and the voltage drop of the power device. In this paper, we propose a simple circuit and method to detect the voltage by measuring the PWM(Pulse Width Modulation) pulse width and compensate the voltage drop of the power device with the table, thereby minimizing the position error due to the exact estimation of the back-emf at low speed. The suitability of the proposed algorithm is verified through experiment.

• 생명과학회지
• /
• 제23권12호
• /
• pp.1471-1476
• /
• 2013

Duolite A568 담체에 흡착으로 ${\beta}$-galactosidase를 고정화시켰다. 효소의 흡착되는 현상은 Freundlich 흡착 등온식을 잘 따랐다. 흡착에 관여된 파라미터인 k와 n은 각각 14.62와 1.744를 얻었다. 자유 효소와 고정화 효소의 속도식에 관여된 매개변수를 구하기 위해 초기 속도법을 실시하였다. Michaelis-Menten 상수($K_m$)는 고정화 효소가 120 mM이고 자유 효소가 79 mM 이었다. 재순환 충진층 반응기에서 갈락토스의 농도를 변화시키면서 경쟁적 저해식에 대한 영향을 조사하였다. 갈락토스에 의한 경쟁적 저해식에 대한 모델이 실험 결과와 잘 일치하였으며 $V_m$, $K_m$ 그리고 $K_I$ 값은 각각 46.3 $mmolmin^{-1}mg^{-1}$, 120 mM and 24.4 mM 이었다. 연속 충진층 반응기에서 락토스 용액의 유량을 증가시킬 때 서로 다른 락토스 농도에서 락토스의 전환율이 감소하였다. 장기 연속 조업을 통해 고정화 효소의 안정성을 평가하기 위해 11일 동안 연속적으로 반응기 운전을 실시하였다. 고정화 효소의 잔류하는 활성은 63%로 유지되었고 효소의 반감기는 15일로 밝혀졌다.

• 멤브레인
• /
• 제14권3호
• /
• pp.192-200
• /
• 2004

본 연구에서는 유기질막에 비해 안정성이 우수하고 사용수명이 긴 세라믹 막을 이용하여 혐기성 Lactobacillus 균주의 농축에 관해서 연구하였다. Cell harvesting (CH)에 영향을 주는 인자로 막투과 압력, 온도, 선속도 등에 대해 조사하였으며 세라믹 막을 이용하여 농축율 변화에 따른 플럭스와 TMP (transmembrane pressure)의 변화, 일정 VCF(volumetric concentration factor)에서 TMP변화 등의 최적조건에 관해 알아보았다. 그 결과 플럭스는 TMP, 선속도, VCF가 증가함에 따라 투과수량도 증가함을 알 수 있었다. 온도가 증가할수록 점도에 의해 초기 플럭스도 증가하지만 시간이 경과함에 따라 막 표면의 겔층의 형성으로 온도의 영향은 미미하였다. 또한 농축비 이하의 일정한 VCF에서 운전할 경우 플럭스가 안정적임을 알 수 있었다. 선속도 5 m/s, 공급액의 온도 $37^{\circ}C$, TMP 1 bar에서 6∼8 h 운전할 경우 PS 406 원액의 생균수는 4.9{\times}10^9$으로 약 8배 농축됨을 알 수 있었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권4호
• /
• pp.221-226
• /
• 2013

Purpose: This study is to evaluate the efficacy of the autogenous tooth bone graft material, clinically and radiologically, as related to implant installation. Methods: In oral and maxillofacial surgery department of Ajou University Hospital, guided bone regeneration (GBR), implant placement combined with GBR, sinus graft, implant placement combined with sinus graft, and defect filling were performed in 46 patients, using autogenous tooth bone. Among these, 66 implants were inserted with autogenous tooth bone. Implant stability quotient (ISQ) was measured by Osstell Mentor (Integration Diagnostics, Goteborg, Sweden) on 39 implants on the operation date and 4 months later, and on 21 implants 9months on the average at the final setting of restoration. Twenty-eight implants with GBR and sinus graft (GBR group: n=14, sinus graft group: n=14) were evaluated radiologically to measure the resorption of grafted autogenous tooth bone after loading. Results: The average initial stabilization of the installed implants was 67 ISQ, and the average secondary stabilization at 4 months later was 76. The average bone loss of GBR group as measured 8.0 months after application of prosthesis loading was 0.29 mm and the average bone loss of the sinus graft group as measured 7.6 months after application of prosthesis loading was 0.66 mm, respectively. In the histological assessment, formation of the new bone and continuous trabecular bone pattern was identified around autogenous tooth bone. Conclusion: Based on these results, we concluded that autogenous tooth bone is an excellent bone graft material that can substitute the autogenous bone.

• Clinics in Shoulder and Elbow
• /
• 제2권1호
• /
• pp.53-59
• /
• 1999

Initial treatment of multidirectional instability of the shoulder would be a thorough rehabilitation program. If rehabilitation fails to resolve a patient's symptoms, the most commonly performed surgical procedure remains the inferior capsular shift. Eleven patients who had disabling multidirectional instability of the shoulder were managed with the inferior capsular shift. All of the procedure were performed by means of an anterior approach and a laterally based capsular shift. All of the patients were the contact athletes. The purpose of our study was to evaluate the efficacy of the inferior capsular shift procedure in the contact athletic patients, to review the loss of external rotation postoperatively and to discuss their return to sports. Mean follow up duration was 14.5 months(range, 12 to 24). Pain was relieved postoperatively in all cases and most patients could get stability except one case of recurrent subluxation. The average loss of external rotation and forward flexion after the operation were Y and 30 at last follow up. By the rating scale from American Shoulder and Elbow Society, overall scores improved from 49 points to 85 points. The results were excellent or good in 9 patients(82%) out of 11 patients. In reference to return to sports, 10 patients(91 %) of 11 patients returned to their sports with 7 patients (64%) returning at the same levels of competitiveness. The inferior capsular shift procedure was considered to be a recommendable method for the management of the multidirectional instability of the shoulder.

• 대한족부족관절학회지
• /
• 제8권2호
• /
• pp.149-152
• /
• 2004

Purpose: We assessed the clinical results of modified Brostrom procedure as a revision method after failure of a primary reconstruction. Materials and Methods: This is a retrospective study of seven patients treated with Modified Brostrom procedure after failed lateral ankle ligament reconstruction between 1996 and 2002. Instability symptom developed average 4.7 month after the initial reconstruction surgery at other clinics. All patients had significant functional impairment before surgery and not responded to conservative protocols. Modified Brostrom procedure was applied to all patients. Results: The average follow up was 51 months (18 to 84). Seven of eight patients had clinical stability following revision reconstruction, six patients (75%) returned to their previous functional level. American Orthopaedic Foot and Ankle Society ankle-hindfoot scores averaged 87.5. There is no difference in active or passive range of motion of plantar flexion or dorsiflexion when compared to the contralateral ankle. However, three patients were noted to have lost some degree of inversion when compated to contralateral ankle. Two patients had osteochondral lesion and multiple spurs and had pain around the ankle that prevented their full recovery. One patient complained of persistent pain which was considered complex regional pain syndrome. Conclusion: Though the outcome of the Modified Brostrom procedure as a method of revision surgery was less satisfactory compared to the results of primary ankle reconstruction, it would be an appropriate option when concomitant abnormalities were not accompanying.

• Clinics in Shoulder and Elbow
• /
• 제7권2호
• /
• pp.65-69
• /
• 2004

Purpose: The purpose of this study is to evaluate the short-term clinical outcome of the capsulolabral repair using absorbable suture anchor in traumatic anterior instability of shoulder. Materials and Methods: From June 2000 to September 2001, 15 shoulders with recurrent anterior instability were operated with arthroscopic Bankart repair using absorbable suture-anchor 'PANALOK' (Mitek, westwood, MA), and were followed up over 1 year (average; 13 months). The mean age was 23-years. There were fourteen males and one female. The mean duration from the initial symptoms to the operation was 24 months. Associated pathologies were Hill-Sachs defect in 12 cases, SLAP in 6 cases, and partial rotator cuff tear in 2 cases. The results were evaluated by patien's satisfaction, Modified Rowe Score in regard to joint stability, mobility, pain and function in comparison with the preoperative ones, and other complications. Results: At the last follow-up, the total Rowe Score increased from 38 points to 92 points. There were no recurrence and 14 patients among 15 patients gained pre-operative level of sports activity and no other complications. Conclusion: Effective capsulolabral repair could be obtained by the absorbable anchoring without any untoward complications. This procedure is simple and safe one and this system can be a good substitute for the metallic anchor.