• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3715-3721
• /
• 2013

In this study, the behavior of cells on the modified surface, and the correlation between the modified substrates and the response of cells is described. A close-packed layer of nano-sized silica beads was prepared on a coverslip, and the adhesion, proliferation, and migration of BALB/3T3 fibroblast cells on the silica layer was monitered. The 550 nm silica beads were synthesized by the hydrolysis and condensation reaction of tetraethylorthosilicate in basic solution. The amine groups were introduced onto the surfaces of silica particles by treatment with 3-aminopropyltrimethoxysilane. The close-packed layer of silica beads on the coverslip was obtained by the reaction of the amine-functionalized silica beads and the (3-triethoxysilyl)propylsuccinic anhydride treated coverslip. BALB/3T3 fibroblast cells were loaded on bare glass, APTMS coated glass, and silica bead coated glass with the same initial cell density, and the migration and proliferation of cells on the substrates was investigated. The cells were fixed and stained with antibodies in order to analyze the changes in the actin filaments and nuclei after culture on the different surfaces. The motility of cells on the silica bead coated glass was greater than that of the cells cultured on the control substrate. The growth rate of cells on the silica bead coated glass was slower than that of the control. Because the close-packed layer of silica beads gave an embossed surface, the adhesion of cells was very weak compared to the smooth surfaces. These results indicate that the adhesion of cells on the substrates is very important, and the actin filaments might play key roles in the migration and proliferation of cells. The nuclei of the cells were shrunk on the weakly adhered surfaces, and the S1 stage in which DNA is duplicated in the cell dividing processes might be retarded. As a result, the rate of proliferation of cells was decreased compared to the smooth surface of the control. In conclusion, the results described here are very important in the understanding of the interaction between implanted materials and biosystems.

• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.37-42
• /
• 2016

The present study has been performed to examine the feasibility of a flame spread model on the design fire scenario for fire risk analysis. Thermo-Gravimetric analysis and sample burning test were conducted to obtain the material properties of a single couch covered with synthetic leather material and a series of FDS calculations applying with the measured material properties were performed for different grid sizes. The overall fire growth characteristics predicted by the fire model were quite different from the results of a real scale fire test and the initial peak value of the HRR and total released energy showed the results within a 30% discrepancy for the computational grids used in the present study. The current model has some limitations in predicting the fire growth characteristics, such as fire growth rate and the time to the maximum HRR. This study shows that the fire model may be applicable to creating the design fire scenario through continuous model improvement and detailed material properties.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.8
• /
• pp.1157-1163
• /
• 2011

This study was conducted to determine the effect of the inclusion of different levels of ensiled cassava leaves (variety KM94) in the diets on performance and carcass characteristics of growing pigs in Vietnam. A total of 40 crossbreds pigs (Large White${\times}$Mong Cai, 20 males and 20 females) with an initial live weight of 23.5 kg (SD = 0.86) were randomly allocated to one of the four pens across 5 units. Four experimental diets were formulated for two growth periods, period 1 (60 days) for 20 to 50 kg and period 2 lasted 30 days, from 50 kg until slaughter. Four diets were formulated containing inclusion levels of ensiled cassava KM94 leaves diet of 0, 10, 15 and 20% in the DM. Diets were formulated based on previously determined ileal amino acid digestibility values of the KM94 products and were isonitrogenous and isocaloric on a metabolizable energy basis. Each pen of pigs was randomly assigned to one of the four dietary treatments. Dry matter intake and final weight tended to decreased with increasing levels of ensiled cassava KM94 leaves in the diet while there was a significant (p = 0.022) decrease in average daily gain. Protein depositions of the F1 pigs tended (p = 0.093) to decrease with increasing inclusion levels of ensiled cassava KM94 leaves. There was no significant difference in feed conversion ratio, carcass quality and fat gain between the groups of pigs. There were clear differences in feed costs among the experimental diets (p = 0.001) with increasing levels of ensiled cassava KM 94 leaves in the diet reducing feed costs. It was concluded that, in diets for growing pig, inclusion of ensiled cassava leaves reduces growth rate of pigs in Vietnam but increases profitability as measured by feed costs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.412-412
• /
• 2014

Zinc oxide (ZnO) is one of the most powerful materials for purifying organic pollutants using photocatalytic activity. In this study, we have introduced a novel method to design highly photoreactive flexible 3 dimensional (3D) ZnO nanocomposite [F-ZnO-m (m: reaction time, min)] by electrospinning and simple-step ZnO growth processing (one-step ZnO seed coating/growth processing). Significantly, the F-ZnO-m could be a new platform (or candidate) as a photocatalytic technology for both morphology control and large-area production. The highest photocatalytic degradation rate ([k]) was observed for F-ZnO-m at 2.552 h-1, which was 8.1 times higher than that of ZnO nanoparticles (NPs; [k] = 0.316 h-1). The enhanced photocatalytic activity of F-ZnO-m may be attributed to factors such as large surface area. The F-ZnO-m is highly recyclable and retained 98.6% of the initial decolorization rate after fifteen cycles. Interestingly, the F-ZnO-m samples show very strong antibacterial properties against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) after exposure to UV-light for 30 min. The antibacterial properties of F-ZnO-m samples are more effective than those of ZnO NPs. More than 96.6% of the E. coli is sterilized after ten cycles. These results indicate that F-ZnO-m samples might have utility in several promising applications such as highly efficient water/air treatment and inactivation of pathogenic microorganisms.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.1
• /
• pp.19-23
• /
• 1995

Cotyledon and leaf development of six important forage legums were compared to study their contribution to the seedling growth, Cotyledons of forage legumes expanded their size rapidly during one week maximum size was reached and entered senescence. Larger seeds produced greater colyledon area, and speed of colyledon expansion was closely associated with seedling growth. Earlier onset leaf production and earlier leaf development were major determinant factor initial seedling growth. Alfalfa and red clover which have larger seeds were good in seedling vigor with larger photosynthetic area. Alsike clover and white clover with small seeds showed also good seedling vigor, as they developed leaves early with relatively high photosynthetic rate. On the other hand, though lespedeza has heavy seeds, its seedling vigor was very poor with slow photosynthetic area development and low photosynthetic rate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.4
• /
• pp.521-526
• /
• 1993

Two percent of monocalcuim phosphate (MCP) was added to control diet consisted of fish meal (18%), soybean meal (36%) and wheat flour (37%) in order to examine the effects on phosphorus (P) discharge and growth of carp (Cyprinus carpio). Growth trial, during which digestibility measurements were made over 7 days, was conducted for 4 weeks using a recirculated rearing system with a settling column for feces collection. Fishes (initial body weight of about 200 g) were fed five times a day upto satiation with tank controlled at $24-26^{\circ}C$. Fishes fed the diet containing 2% MCP (MCP-2) showed about two-fold improvement on both growth rate and feed utilization, compared to those of fishes fed the control diet; weight gain (129 g vs 62 g), feed conversion ratio (1.20 vs 2.46), protein efficiency ratio (2.09 vs 1.07) and daily growth index (3.70 vs 1.93). However, feed intakes were maintained at the same level (150 g/fish) between the two treatments. Dry matter digestibilities of two diets were relatively low, which were 58 and 60% for respective control and MCP-2 diets due to low digestibility of total carbohydrates. However, the digestibilities of both dietary protein (85%) and lipid (90%) of diets were relatively high. While all the P fed were observed to be discharged from fish fed control diet, the discharge from fish fed the MCP-2 diet was decreased up to less than the half (34.9 g/kg wt. gain) of the control. These present results revealed that the supplementation of dietary P requirement by MCP can not only promote growth performances but also reduce the level of P loading to water which is the primary water pollution indicator.

• Microbiology and Biotechnology Letters
• /
• v.9 no.4
• /
• pp.225-230
• /
• 1981

The kinetic study of rifamycin B production in batch culture of Nocardia mediterranei was undertaken in part of our endeavor to optimize the fermentation condition. The growth parameters such as $\mu$$_{m}$ and Ks values for nitrogen source were evaluated by employing Monod equation. From the experiments, $\mu$$_{m}$ and Ks were 0.15hr$^{-1}$ and 8.35g/1, respectively. The growth kinetics in batch culture was found successfully interpreted by logistic law, i.e., the initial specific growth rate and the maximum cell mass concentration were determined as function of pH and both found to have maxima. For the production of rifamycin B, a non-growth associated production kinetics was employed and the specific productivity as a function of pH was found to have two maximum points. The yield coefficient and the specific productivity were calculated as mean values in production phase. Utilizing these experimental data as a function of pH, the optimal condition for the rifamycin B production was discussed with regad to the pH effect on the cell growth and production of the antibiotic. As a result, growth phase at pH 6.5 and production phase at pH 7.0 were found to be recommended.ded.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.1-8
• /
• 2023

Power transmission shafts in rotary wing aircraft use a hollow shaft to reduce weight. We can apply linear elastic fracture mechanics to predict crack propagation behavior. This paper predicted crack growth life of a hollow shaft with a circumferential through-type crack by finite element analysis. A 2D finite element model was created by applying a torsion and forming elements considering cracks. We defined the initial crack length and performed the finite element analysis by increasing the crack length to derive stress intensity factor at crack tips. We defined the length just prior to the stress intensity factor exceeding the fracture toughness as the crack limit length. We calculated the crack limit length using a handbook and numerically integrated the crack growth rate equation to derive growth life of each crack. The growth life of each crack was compared to verify the proposed finite element analysis method.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.1
• /
• pp.33-46
• /
• 2019

Even though Korea is strengthening the support for startups due to the limitations of growth policies focusing on large companies, the survival rate of startups is very low, so that there should be more efforts to increase the survival rate of startups. As the existing startup support institutions have provided only fragmentary supports to startups, it would be necessary to have the comprehensive support institutions. As an alternative, the accelerator providing the comprehensive support such as spatial support, education, mentoring, networking, seed investment, and connection for follow-up investment to the initial startups was legalized in Korea of 2016, based on the registration system. Currently, within less than two year from then, there have been much interest in it enough to have about 136 registered accelerators. In the United States, the accelerator was introduced more than ten years ago. In Korea, however, it is still in the initial stage, so that the researches or social consensus on the accelerator are not sufficient. Thus, this study aims to suggest the measures for the development of accelerator and the consensus on the decision making for the selection of accelerator of startups, by researching which parts are considered when startups in the accelerator stage select the accelerator. As a result of the empirical analysis, the factor that has the greatest influence on decision making factors when startup chooses an accelerator was the subsequent investment attraction. This can be explained to the accelerator as desired, considering the factor that the startup of the initial stage places the most importance on growth as investment. We hope that these research results will be sustainable in future research related to accelerators, in hopes that it will be useful for establishing accelerator policies for domestic startups and direction for revitalizing related industries.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.259-262
• /
• 1999

In this study, we investigated magnetic Properties of N $i_{0.2-x}$C $u_{x}$Z $n_{0.305}$F $e_{0.495}$ (x=0 ~0.2) ferrites. As the increased, the density and shrinkage increased until 5.3g/㎤, 20% respects, but the absorption decreased rate until 0.01%. As a results of the density, absorption rate, and shrinkage rate, the grain growth progressed rapidly in x=0.125 at 105$0^{\circ}C$, x=0.075 at 115$0^{\circ}C$, and x=0.025 at 115$0^{\circ}C$ for 3hours. As the CuO concentration increased, initial permeability increased at sintered 105$0^{\circ}C$ and 115$0^{\circ}C$ for 3 hours, but decreased at 125$0^{\circ}C$ for 3 hoers. The complex permeability as a function of frequency were high values at sintered 105$0^{\circ}C$ for 3 hours in x=0.005, 0.075.5.5.5.