• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.8
• /
• pp.531-538
• /
• 2015

This study examined the size and shape of the nano-silver particle through the analysis of electrical resistance when synthesizing nano-sized silver by using the chemical liquid reduction. Changes in particle behaviors formed according to the changes in electronic characteristics by electric resistance in each time period in the beginning of reduction reaction in a course of synthesizing the nano-silver particle formation were studied. In addition, analysis was conducted on particle behaviors according to the changes in concentration of $AgNO_3$ and in temperature at the time of reduction and nucleation and growth course when synthesizing the particles based on the particle behaviors were also examined. As the concentration of $AgNO_3$ increased, the same amount of resistance of approximately $5{\Omega}$ was increased in terms of initial electronic resistance. Furthermore, according to the result of formation of nuclear growth graph and estimation of slope based on estimated resistance, slops of $6.25{\times}10^{-3}$, $2.89{\times}10^{-3}$, and $1.85{\times}10^{-3}$ were derived from the concentrations of 0.01 M, 0.05 M, and 0.1 M, respectively. As the concentration of $AgNO_3$ increased, the more it was dominantly influenced by the nuclear growth areas in the initial phase of reduction leading to increase the size and cohesion of particles. At the time of reduction of nano-silver particle, the increases of initial resistance were $4{\Omega}$, $4.2{\Omega}$, $5{\Omega}$, and $5.3{\Omega}$, respectively as the temperature increased. As the temperature was increased into $23^{\circ}C$, $40^{\circ}C$, $60^{\circ}C$, and $80^{\circ}C$, slopes were formed as $4.54{\times}10^{-3}$, $4.65{\times}10^{-3}$, $5.13{\times}10^{-3}$, and $5.42{\times}10^{-3}$ respectively. As the temperature increased, the particles became minute due to the increase of nuclear growth area in the particle in initial period of reduction.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.4
• /
• pp.295-298
• /
• 1996

Under glutamine-limited condition, $2\times10^6$ (viable cells/ml) of maximum cell density and 13.5 ($\mu g$/ml) of tissue-type Plasminogen Activators (tPA) production were maintained by spike feeding fresh medium in fed-batch cultivation of human recombinant melanoma cells. It showed that tPA production was much seriously affected than cell growth according to initial glutamine concentrations. Above 3.4 (mmol/I) of glutamine concentration both cell growth and tPA production were not much affected by increasing initial glutamine concentration. Glutamine depleted situation was occurred at latter periods of batch and fed-batch cultivations below 5.4 (mmole/I) of initial glutamine concentration. It also showed that maximum glutamine consumption and ammonia evolution rates were closely related to initial glutamine concentrations. Maximum specific tPA production rate was estimated as $8.1\times19^{-6}$ ($\mu g$/cells/h) at 3.4(mmol/I) of glutamine concentration, which is higher than that from other batch and fed-batch processes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.6
• /
• pp.365-372
• /
• 2016

Using the computational fluid dynamics (CFD) technique, we simulated the fluid flow in a Taylor reactor considering the aggregation and breakage of particles. We calculated the population balance equation (PBE) to determine the particle-size distribution by implementing the quadrature method-of-moment (QMOM). It was used that six moments for an initial moments, the sum of Brownian kernel and turbulent kernel for aggregation kernel, and power-law kernel for breakage kernel. We predicted the final mean particle size when the particle had various initial volume fraction values. The result showed that the mean particle size and initial growth rate increased as the initial volume fraction of the particle increased.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.12
• /
• pp.1849-1855
• /
• 2006

It has been shown that the initial conditions of bacterial cultivation are extremely important for the successful production of hyaluronic acid (HA) by fermentation. We investigated several parameters that affect cell growth rate and the productivity and molecular weight of hyaluronic acid--i.e., agitation speed, aeration rate, culture temperature, pH, and pressure--to determine how to optimize the production of HA by Streptococcus zooepidemicus on an industrial scale. Using a 30-1 jar fermentor under laboratory conditions, we achieved maximum HA productivity and biomass when the agitation speed and aeration rate were increased simultaneously. By shifting the temperature downward from 35$^{\circ}C$ to 32$^{\circ}C$ at key levels of cell growth during the fermentation process, we were able to obtain HA with a molecular weight of $2.8{\times}10^6$ at a productivity of 5.3 g/l. Moreover, we reproduced these optimized conditions successfully in three 30-1 jar fermentors. By reproducing these conditions in a 3-$m^3$ fermentor, we were able to produce HA with a molecular weight of $2.9{\times}10^6$ at a productivity of 5.4 g/l under large-scale conditions.

• Journal of Life Science
• /
• v.9 no.3
• /
• pp.293-299
• /
• 1999

Accumulation of toxic waste byproducts in hybridoma culture can limit cell growth and monoclonal antibody (MAb) productivity, and one of the major toxic metabolites is lactate produced via glycolytic pathway of glucose metabolism. The factors affecting the glucose to lactate conversion rate were investigated. The conditions of high initial glucose concentration and high growth rate stimulated glucose to lactate conversion rate. The glucose-controlled fed-batch culture was investigated, and 19% reduction in lactate formation and 41% enhancement of MAb titer could be achieved by fed-batch culture.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.4
• /
• pp.7-14
• /
• 2009

Nucleate pool boiling experiments with constant heat flux condition were performed using pure R11 and R113 for various surface angles under saturated pool condition. A circular heater of 1 mm diameter, with artificial cavity in the center, fabricated using MEMS technique and the high-speed controller were used to maintain the constant heat flux. Images of bubble growth were taken at 5,000 frames per second using a high-speed CCD camera. The bubble geometry was obtained from the captured bubble images. The effects of surface angles on the bubble growth behaviors were analyzed as dimensional scales for the initial and thermal growth regions. The parameters for the bubble growth behaviors were bubble radius, bubble growth rate, sliding velocity, bubble shape and advancing and receding contact angles. These phenomena require further analysis for various surface angles, but this study will provide good experimental data with constant heat flux boundary condition for such works.

• Journal of Korean Society of Forest Science
• /
• v.95 no.5
• /
• pp.516-523
• /
• 2006

Marginal soils such as BRlS (Beach Ridges Interspersed with Swales) soils and ex-tin mining land make up approximately 0.5 million ha or about 2% of Malaysia's land area. In the coastal areas of the east coast of Peninsular Malaysia impoverished sandy BRIS dominates the landscape with most lying idle as there is no national management plan for their utilization. A field study was carried out to see whether mycorrhizal application had any effect on the growth of three exotic Acacia spp., i.e. Acacia auriculiformis, A. mangium and Acacia hybrid (A. auriculiformis ${\times}$ A. mangium) on BRIS soils. Two types of mycorrhizal inoculum, namely, a commercially available arbuscular mycorrhizal inoculum marketed as $MycoGold^{TM}$ and an indigenous ectomycorrhizal Tomentella sp. inoculum were tested. In the initial six months, height growth of all three tree species inoculated with the arbuscular mycorrhizal inoculum was significantly improved compared to the ectomycorrhizal inoculated and uninoculated control plants. The mycorrhizal effect was not evident thereafter and repeated application of the arbuscular mycorrhizal inoculum may be necessary for continued growth enhancement. Of the three species, A. mangium had the highest relative height growth rate over the 24 months on BRlS soils.

• Microbiology and Biotechnology Letters
• /
• v.25 no.1
• /
• pp.106-108
• /
• 1997

Blue green algaes (NIES 19, 39, 46) have been cultivated to product sigle cell protein. After 7 days of cultivation under 5000 (W/M$^{2}$) of ligth intensity, final cell concentration was 2.8 (g/L) and chlorophyll a was 4.9 (mg/L). When initial concentration of NaHCOC was 1.7% and NaNO$_{3}$ was0.25%, maximum cell concentration was obtained. Spirulina platensis NIES 39 showed faster growth rate than NIES 46. While most 39 sedimented, most 46 floated.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.364-367
• /
• 2003

In this paper, we have examined the MTBE cometabolic degradation by pure culture, which is isolated gasoline contaminated aquifer. Propane was more effectively utilized as a growth substrate to oxidize MTBE. Specific substrate degradation rate was Increased with increasing initial propane amount. Respiking propane was enhanced and continued MTBE degradation and TBA observation was supported MTBE degradation. The mass balance of MTBE and TBA indicated that MTBE was oxidized to TBA as well as further oxidation of TBA.

• Fisheries and Aquatic Sciences
• /
• v.18 no.1
• /
• pp.81-88
• /
• 2015

We investigated factors affecting primary cultures of Pacific abalone Haliotis discus hannai ovary-dissociated cells to identify general aspects of their early-phase culture. Ninety-seven cell populations derived from 30 individuals were cultured in different media with varying compositions of medium supplements, and initial attachment, subculture, and survival for ${\geq}10$ weeks were assessed according to medium composition and individual. We also examined the time required for subculture and the rate of cell death according to both culturing period and passage number within 10 weeks. A lack of fetal bovine serum (FBS) and hemolymph significantly inhibited the growth of cultured cells, while we detected no significant effect of medium composition on initial cell attachment. Through data reallocation, with the omission of data from cell populations cultured in FBS-free and hemolymph-free media, we showed that growth inhibition was also affected by individual differences among the abalones used. During the culture, we observed four different types of cell morphology. Moreover, considerable time was required for subculture-18.4 and 19.5 days for first and second subcultures, respectively-and cell death did not occur within 30 days or for passage 0. Our results will provide valuable information for developing universal cell culturing guidelines in abalone species and suggest the feasibility of culturing abalone ovary-dissociated cells.