• 한국농공학회논문집
• /
• 제52권6호
• /
• pp.101-110
• /
• 2010

This study was performed to evaluate the void ratio and strength of porous polymer concrete used coarse aggregates and unsaturated polyester resin to find optimum mix design of porous polymer concrete for planting block. Also, this study was performed to evaluate the planting properties of herbaceous plant and cool-season grass in porous polymer blocks based on the experimental results of porous polymer concrete to develop environmentally friendly planting blocks. Tests for the void ratio and compressive strength of porous polymer concrete were performed at the curing age 7 days. Also, kinds of plants such as Tall fescue, Perennial ryegrass, Lespedeza and Alfalfa for planting were applied to porous polymer blocks. Within 6 weeks after seed, initial germination ratio, cover view and growth length for planting blocks were estimated by various methods.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.159-159
• /
• 2000

Initial growth mode of Nb on Cu(100) is studied by scanning tunneling microscopy (STM) and density functional theory. Nb/Cu is immiscible at room temperature, but isolated Nb atoms are expected to be incorporated up to the second layer by DFT. STM shows that Nb atoms mix with Cu atoms in the first layer at room temperature and diffuse into the second layer upon annealing. In the second layer, Nb/induced features are preferentially found at step edges and appear as bright dots surrounded by dark rings. Details of comparison between experiment and theory will be discussed.

• 한국진공학회지
• /
• 제7권2호
• /
• pp.135-140
• /
• 1998

고온($350^{\circ}C$)에서 polyimide위에 증착한 Cu의 초기성장 과정과 Cu/polyimide계면에서 의 반응물 형성에 관하여 XPS를 이용하여 관찰하였다. Polyimide 위에 고온 중에서의 Cu 증착시, 상온에서와는 달리 초기에는 Cu-C-N complex가 먼저 형성되고, 다음에 Cu-N-O complex가 주가 되어 Cu/Polyimide 계면을 형성하고, Cu의 증착두께가 증가함에 따라 Cu 산화물에서 서서히 metallic Cu로 성장하는 것을 볼 수 있었다. 그리고 반응물 형성 관점에 서, Cu 고온 증착시에 형성된 Cu/polyimide의 계면이 상온에서 이루어진 계면보다 상당히 예리함을 볼 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.192.2-192.2
• /
• 2013

Crystalline order and surface stability of 1,4,5,8,9,11-hexaazatriphenylene-hexanitrile (HATCN) thin films on organic surface were investigated using grazing incidence wide angle x-ray scattering and x-ray reflectivity measurements. In the initial growth regime (less than 20 nm), HATCN molecules were stacked to low crystalline order with substantial amorphous phase. Meanwhile, a thicker film with 50 nm thickness showed high crystalline order of hexagonal phase with three different orientational domains. The domain distribution was quantitatively obtained as a function of tilted angle. By an organic-inorganic interface formation of IZO/HATCN thin film from an indium zinc oxide (IZO) electrode deposition, the surface stability of HATCN film was investigated and the sharp interface was confirmed by the x-ray reflectivity measurement.

• 미생물학회지
• /
• 제22권2호
• /
• pp.91-96
• /
• 1984

The changes in the activities of Cellulase and Xylanase of A. phoencis during the life cycle were surveyed by using synchronized culture technique. Avicelase activity of the fungus was reached at peak in the initial hyphal growth stage, but decreased gradually during the conidiophore formation, vesicle-phialide formation, and sporulation stages in decreasing order. CMCase, Salicinase, and Xylanase activities were raised very high in the initial hyphal growth stage, but decreased gradually in conidiophore formation and vesicle-phialide formation stages, and then increased, more or less, in the sporulation stage.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.477-483
• /
• 1997

Experiments have been performed to investigate the formation of smoke layer in case of several furniture fires such as trashcan, chair, carpet, sofa, mattress, and wardrobe in a residential room. As a result of the present investigation, the uniformly distributed fire of carpet showed that the ignition and the initial growth period were relatively short while the fully developed period was considerably long. The concentrated fires such as mattress and wardrobe showed that the ignition and the initial growth period were relatively long. The descending time of the interface heights was within 1-3 minutes to reach around 1m. However, the interface height was lowered to 0.25-0.75m above the floor at the time of the maximum temperature.

• 한국수소및신에너지학회논문집
• /
• 제20권3호
• /
• pp.202-207
• /
• 2009

A 75kW MCFC stack with the reactive area of 9,600cm$^2$ has been operated and validated in Boryeong thermal power plant. The 75kW MCFC stack was installed at the end of November 28, 2008 and started initial operation on December 23, 2008 after pretreated for about 20 days. At initial load operation, the stack showed the Open Circuit Voltage of 137V, which approaches the theoretical value. At the early stage of rated power operation, the stack displayed the voltage of 104V at the current of 754A and reached the maximum generating power of 78.5kW DC. This stack has been operated for 2,890 hours until April, 2009. In addition, the operation time of rated power records 1890 hours. This Operating result is scheduled to be reflected the design of l25kW stack.

• KSBB Journal
• /
• 제11권3호
• /
• pp.367-373
• /
• 1996

Rhodotorula sp. Y -55 효모의 중식특성을 etha nol, acetic acid 또는 acetaldehyde 상에서 batch culture로 조사하였다. 기질농도가 중가함에 따라 중식수율이 감소하고 유도기가 연장되었다. 비성장속도(${\mu}$)는 지수기에서 ethanol과 acetaldehyde의 초기농도에 따라 변화하였으나 acetic acid는 이와 상관이 없었으며 그 값은 $O.107h^{-1}$로 나타났다. 최대 비성장속도는 20g/L의 ethanol에서 $O.270h^{-1}$, O.2g/L의 acetaldehyde에서 $O.041h^{-1}$이었다. 또 최대 중식수융은 109/L의 ethanol에서 32.6%, 20g/L의 a acetic acid에서 25.6%와 O.2g/L의 acetaldehyde 에서 45%였다. 세포내 조단백질과 핵산 함량은 e­t thanol상에서 각각 41.5wt%와 4.9wt %였고 acetic acid상에서는 각각 40.2wt %와 4.7wt%로 나타났다.

• 한국약용작물학회지
• /
• 제24권3호
• /
• pp.198-206
• /
• 2016

Background: Electrical conductivity (EC) and pH are important features of nutrient solution, affecting both growth and quality of crops by altering nutrient uptake. Methods and Results: The pH values of nutrient solutions were controlled at 5.0, 5.5, 6.0, 6.5 and EC values were controlled at 0.68, 0.84, 1.23, 1.41 dS/m. Gingesng root weights were higher during the initial growth period when the plants were treated with low pH and low EC nutrient solutions. However, the higher pH and EC levels, the greater the increase in the rate of root weight between the initial and middle growth periods. The highest ginsenoside amount changed during growth period. The total ginsenoside amount was highest in the root, and the lowest in leaves at 45 and 90 days after treatment, respectively, with solution at a pH of 6.0. After 135 days of treatment, the highest total ginsenoside amount was detected in root treated with soluton with EC values of 1.23 dS/m. Conclusions: For the cultivation of ginseng using a nutriculture system, the pH and EC values of nutrient solutions should to be controlled based on the stage of growth and targeted plant organ (root or leaves).

• KSBB Journal
• /
• 제4권1호
• /
• pp.48-56
• /
• 1989

K.fragilis를 이용한 돼지감자의 알콜발효에서 초기 당농도 및 초기 pH가 발효특성치에 미치는 영향을 실험을 통하여 규명하였으며 그 결과를 종합하면 다음과 같다. 1) 최대 비성장속도($\mu$$_{max})는 초기 당농도 65g/l에서 0.40$hr^-1로서 가장 높은 값을 나타내었다. 2) 최대 비알콜생성속도(V$_{max})는 초기당농도 105g/1에서 1.68g/ghr로서 가장 높은 값을 나타내었는데, 이것은 빠른 균체의 성장이 곧 빠른 생성물 생성의 조건이 아님을 뜻한다고 여겨지며, 저농도 기질에서 기질 및 생성물의 저해를 적게 받는 것을 알 수 있다. 3)균체(Y$_{x/s})및 메탄올수율(Y$_{p/s})은 저농도 기질인 당농도 26g/1에서 각각 0.14, 0.49로서 최대값을 나타내었다. 4)알콜발효능(F)는 기질농도 26, 45g/1에서 97%로서 가장높았고, 잔당의 농도도 5g/1미만이 였다. 5)총팔에탄올생성율(Q)은 고농도 기질인 당농도 215g/1에서 2.78/ghr로서 가장 높았다. 6)효모 K.fragilis가 분비하는 lnulinase의 생성최적 p$^{H}인 5.5에서 최대 비성장속도 0.40, 최대 비알콜 생성속도 1.60, 균체수율 0.096, 에탄올수율 0.49로서 최대 값을 나타내었다.