• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.178-183
• /
• 1998

This paper examines the crack growth behavior of 7075-T651 and 5052-H32 aluminum alloys for variable load within tensile load range condition. The cantilever beam type specimen with a chevron notch is used in this study. The crack growth and closure are investgated by compliance method. The applied initial stress ratio is R=0.3 and variable load are R=0.65, 0.46. Crack length, stress intensity factor range, ratio of effective stress intensity factor range and crack growth rate etc. are inspected with fracture mechanics estimate.

• Journal of the Korean Society of Safety
• /
• v.15 no.3
• /
• pp.57-65
• /
• 2000

The stress corrosion crack growth is simulated assuming a small axial surface crack inside a S/G tube. Internal pressure and residual stresses are considered as applied forces. Stress intensity factors along crack front, variation of crack shape and crack growth rate are obtained and discussed. It is noted that the aspect ratio of the crack is not depend on the initial crack shape but depend on the residual stress distribution.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.891-892
• /
• 2006

To test the correlation between grain shape and growth behavior we prepared WC-TiC-Co samples with rounded (Ti, W)C grains and faceted WC grains. The growth of rounded (Ti, W)C grains was normal. In contrast, the growth of faceted WC grains was abnormal or suppressed depending on the initial size of WC particles. These observations were explained using growth theories of crystals in a liquid and were also confirmed by a simulation using their growth equations. The present results thus demonstrate that the growth behavior of carbide grains in a liquid is governed only by their shape, irrespective of the presence of another phase.

• International Area Studies Review
• /
• v.20 no.1
• /
• pp.127-146
• /
• 2016

This paper investigates that the Granger-causality between ODA FDI Trade, and economic growth in Senegal over the last 50 years and ODA, FDI, Trade have a impact on the Senegal's economic growth using the Vector Error Correction Model. The empirical results do confirm a directional causality between the variables considered. It also showed that an increase of ODA in the Senegal has positive effect on GDP growth and FDI, which are important factors of economic growth for poor country like Senegal. Underdeveloped nation has been suffered from insufficient savings or capital for economic growth; therefore, developed nations have to provide enough ODA to supply initial capital formation for growth, so-called, seed money. In a nutshell, ODA as a priming the pump is required and expanded continuously for Africa country's economic growth.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.340-348
• /
• 2015

Mowing turfgrasses, especially fast growing species like perennial ryegrass, is one of the most time and money consuming tasks of their management. Trinexapac-ethyl (TE) is a popular plant growth regulator used to reduce mowing requirements, improve stress tolerance, and enhance turf quality. This study was conducted to investigate the effect of TE rate and frequency of applications on growth response and traffic tolerance of perennial ryegrass. The experiment was a split-plot laid out in a randomized complete block (RCB) design with three replications. TE was applied to main plots at 0.00, 0.25, and $0.50kg\;a.i.\;ha^{-1}$. Application pattern included an initial application, followed by two sequential applications at 6-wk intervals. Traffic treatment was applied to subplots with a cleated roller. Results demonstrated that TE consistently reduced vertical shoot growth, clippings dry weight, with maximum growth reduction of 59% and 65%, for 0.25 and $0.50kg\;a.i.\;ha^{-1}$, respectively, occurring at 2 weeks after initial TE treatment (WAT). Traffic also dramatically reduced vertical shoot growth and clippings dry weight. Overall, quality of perennial ryegrass was enhanced by sequential TE applications, however, turf quality and surface coverage reduced greatly under traffic, regardless of TE treatment. Total chlorophyll, chlorophyll a and chlorophyll b and total carbohydrates (TC) contents were also positively influenced following sequential TE application. Our results indicated that TE reduces mowing frequency and enhances turf quality rather than influencing traffic resistance.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.3
• /
• pp.273-279
• /
• 1999

The home-made hot wall epitaxy (HWE) system was utilized for GaN epitaxial layer growth on the Si(001) substrate. It was appeared that GaN epilayer grow with mixed phase of Zinc blende and Wurtzite structure from photoluminescence (PL) and x-ray diffraction (XRD) analysis at the room temperature. We found that intial growth layer has Wurtzite structure from photoluminescence (PL) and x-ray diffractio (XRD) analyses at the room temperature. Wefound that initial growth layer has Wurtzite structure when initial deposition time, the temperature of substrate and source are 4 min, $720^{\circ}C$ and $860^{\circ}C$ respectively, and at the epi growth process GaN, epilayer was grown with relatively stable Wurtzite structure when the temperature of substrate and source are $1020^{\circ}C$ and $910^{\circ}C$ respectively.

• Journal of Sericultural and Entomological Science
• /
• v.44 no.2
• /
• pp.74-81
• /
• 2002

The optimal conditions for mycelial growth of P. linteus ASI 26011 were 25-30$^{\circ}C$ and pH 6.0, respectively. The mycelial growth of P. linteus was excellent on MCM medium. In case of carbon sources, the mycelial growth of P. linteus was best on the culture media that were contained with sucrose, mannose and glucose. Potassium nitrate and sodium nitrate were good for the mycelial growth of P. linteus as a nitrogen source. For comparison of the mycelial colonization of P. linteus on logs, several techniques of inoculation were tested; the sterilized short log inoculation, drilling inoculation and log-end sandwich inoculation. The mycelial colonization of P. linteus on logs was good in the treatment of sterilized short log inoculation, but poor in the traditional methods such as drilling inoculation and log-end sandwich. The initial mycelial growth and the full mycelial colonization of P. linteus were the best on 20 cm logs under the condition of 42% of moisture content in log. Also the initial mycelial growth of P. linteus was accelerated over 12 hours of sterilization. Burying method of logs after 5-6 months of incubation was the best for formation of basidiocarp of P. linteus. The formation of fruiting body of P. linteus was quite good in the cultivation house at the 31-35$^{\circ}C$ and over 96% of relative humidity.

• Korean Journal of Microbiology
• /
• v.14 no.1
• /
• pp.8-16
• /
• 1976

About 600 strains of bacteria which can utilize methanol as the sole source of carbon were isolated from natrual sources, and their ability to produce amino acids on the medium containing methanol as the sole source of carbon was tested by paper chromatography, by which 3 strains were screened by virtue of their relatively shperior amino acid production. These were tentatively identified as follows ; one strain belonged to the genus methylomonas, while the remaining two were members of the genus Hyphomicrobium. Further studies on their growth characteristics were carried out with relation to amino acid production. According to these experiments, the following results were obtained. 1) No vitamin added was effective for the growth enhancement. 2) Optimum initial concnetration of methanol was proved to be one per cent (v/v), and no conspicuous effect of feeding methanol on the growth of these bacteria ould be observed, provide that the initial methanol concentration was controlled to 1 per cent. 3) Among the nitrogen sources tested, 0.1 per cent of ${(NH_4)}_2SO_4$ enabled the best growth. 4) Addition of 0.001 per cent $MgSO_4.$ $7H_2O$ largely increased the growth of all three strains. Other metal ions tested were either not effective or strongly inhibitory for the growth. 5) Addition of 0.1 per cent each of yeast extract, corn steep liquor, beef extract, and peptone also increased the growth markedly. 6) About $75{\mu}$g/ml of alanine could be obtained finally after 64 hr culture of Hypm. A on the medium lcontaining 0.1 per cent yeast extract and 1 percent methanol. Approximately $40.{\mu}$g/ml of glutamic acid by Hypm. GA and $43.{\mu}$g/ml of alanine by Mtlm. A were produced at the same culture conditions.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.602-609
• /
• 1997

The seed formation and growth of $\alpha$-ferric oxyhydroxide with aerial oxidative precipitation from aqueous solution of ferrous sulfate with KOH, NaOH, $Na_2CO_3$ and $K_2CO_3$ as precipitants have been studied by free pH drift experiment. It has been shown that all precipitants give same particle formation and growth path, and average particle length from KOH and NaOH as precipitants was about 1.5 times shorter than that of $K_2CO_3$ and $Na_2CO_3$. When initial mole ratio, $R_o=[Fe^{2+}]_o/[OH^-]_o$ of KOH was decreased the particle was grown oxyhydroxide seed growth from aqueous solution of ferrous sulfate with KOH has been studied. The influence of the air flow rate, reaction temperature and initial mole ratio, $R_o=[Fe^{2+}]_o/[OH^-]_o$, on the kinetics of seed growth are investigated by static pH experiment. The oxidation rate of seed growth increased with increase in the air low rate, reaction temperature and initial mole patio. The activation energy of seed growth is 16.16 KJ/mol and the rate equation of seed growth can be written as follows: $-\frac{d[Fe^{2+}]}{dt}=1.46{\times}10^4[P_{o2}]^{0.66}[OH^-]^{2.19}exp(-\frac{16.16}{dt})$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.8
• /
• pp.531-538
• /
• 2015

This study examined the size and shape of the nano-silver particle through the analysis of electrical resistance when synthesizing nano-sized silver by using the chemical liquid reduction. Changes in particle behaviors formed according to the changes in electronic characteristics by electric resistance in each time period in the beginning of reduction reaction in a course of synthesizing the nano-silver particle formation were studied. In addition, analysis was conducted on particle behaviors according to the changes in concentration of $AgNO_3$ and in temperature at the time of reduction and nucleation and growth course when synthesizing the particles based on the particle behaviors were also examined. As the concentration of $AgNO_3$ increased, the same amount of resistance of approximately $5{\Omega}$ was increased in terms of initial electronic resistance. Furthermore, according to the result of formation of nuclear growth graph and estimation of slope based on estimated resistance, slops of $6.25{\times}10^{-3}$, $2.89{\times}10^{-3}$, and $1.85{\times}10^{-3}$ were derived from the concentrations of 0.01 M, 0.05 M, and 0.1 M, respectively. As the concentration of $AgNO_3$ increased, the more it was dominantly influenced by the nuclear growth areas in the initial phase of reduction leading to increase the size and cohesion of particles. At the time of reduction of nano-silver particle, the increases of initial resistance were $4{\Omega}$, $4.2{\Omega}$, $5{\Omega}$, and $5.3{\Omega}$, respectively as the temperature increased. As the temperature was increased into $23^{\circ}C$, $40^{\circ}C$, $60^{\circ}C$, and $80^{\circ}C$, slopes were formed as $4.54{\times}10^{-3}$, $4.65{\times}10^{-3}$, $5.13{\times}10^{-3}$, and $5.42{\times}10^{-3}$ respectively. As the temperature increased, the particles became minute due to the increase of nuclear growth area in the particle in initial period of reduction.