• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1722-1729
• /
• 1994

At early stage of creep-fatigue crack growth tests, initial transient behavior which implies high crack growth rate has been generally observed by some researchers. Since the influence of the initial transient crack growth behavior on the remaining life of components is significant, cause of it should be further studied. In this study, characteristics of the initial transient behavior of 1Cr-1Mo-0.25V steel is studied experimentally by performing creep-fatigue crack growth tests at $538^{\circ}C$ in air under trapezoidal waveshapes. It is verified that the cause of the initial transient behavior is not high ${(C_t)}_{avg}$ values due to the small scale creep condition at the early stage of test, but oxidation-dominated crack growth mechanism during the transient period which is different from the creep-dominated crack growth mechanism in steady crack growth period.

• Journal of Plant Biology
• /
• 제37권4호
• /
• pp.397-402
• /
• 1994

Possible roles of polyamines in the inhibition of cell elongation in Ranunculus petioles were investigated. Exogenously apoplied polyamines greatly inhibited the auxin-induced petiole growth, while treatment of the tissue with $\alpha$-difluoromethylarginine, the inhibitor of putrescine biosynthesis, further enhanced the growth in the presence of IAA. Inhibitory effect of spermine can also be apparent for fusicoccin-induced elongation, but not for growth induced by a low pH. Spermine also suppressed the ethylene-enhanced growth in the presence of auxin. Using computer-based video digitizer system, the inhibitory effects of spermine on petiole growth were kinetically analyzed. Auxin-induced growth was characterized by an initial and transient growth with a highly elevated rate followed by a steady growth with a slightly reduced rate. Spermine treatment was found to shorten the duration of the initial phase of growth, and to reduce the rates of both the initial and steady growth as well. The latent period for auxin induction was not affected by spermine.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제1권1호
• /
• pp.22-25
• /
• 1996

An Exponetial feeding strategy has been frequently used in fed-batch fermentation of recombinant E. coli. In this feeding scheme, growth yield and initial cell concentration, which can be erroneously determined, are needed to calculate the feed rate for controlling specific growth rate at the set point. The effect of the incorrect growth yield and initial cell concentration on the control of the specific growth rate was theoretically analyzed. Insignificance of the correctness of those parameters for the control of the specific growth rate was shown theoretically and experimentally.

• 한국결정성장학회지
• /
• 제2권1호
• /
• pp.1-9
• /
• 1992

Czochralski법에 의한 단결정 성장 시스템에서 초기 결정 성장시 복사열 방출 관계를 계산하였다. 복사열 계산을 위해 표면 요소 사이의 형상계수를 계산하였으며 표면은 diffuse-gray 면으로 가정하였다. 같은 표면상에서도 표면 요소의 위치에 따라 형상계수의 값이 크게 다르게 나타났다. 초기 성장시 액상 표면에서 방출되는 총 열량이 결정 표면에 비해 3.6배 크게 나타났고 표면 요소를 고려하지 않았을 때는 표면 요소를 고려하였을 때에 비해 상대적으로 큰 열량이 방출되었다. 대기와 액상의 표면과 공통으로 접하고 있는 결정의 맨 아래 부분은 결정에 제일 가까운 액상 표면에 의해 크게 영향을 받았다. 따라서 초기 성장 모사를 위해서는 반드시 표면 요소 사이의 복사 열전달 관계가 고려되어야 한다.

• 대한기계학회논문집B
• /
• 제29권2호
• /
• pp.169-179
• /
• 2005

Nucleate boiling experiments on heating surface of constant wall temperature were performed using R113 for almost saturated pool boiling conditions. A microscale heater array and Wheatstone bridge circuits were used to maintain a constant wall temperature condition of heating surface and to measure the heat flow rate with high temporal and spatial resolutions. Bubble images during the bubble growth were taken as 5000 frames per second using a high-speed CCD camera synchronized with the heat flow rate measurements. The bubble growth behavior was analyzed using the new dimensionless parameters for each growth regions to permit comparisons with previous experimental results at the same scale. We found that the new dimensionless parameters can describe the whole growth region as initial and later (thermal) respectively. The comparisons showed good agreement in the initial and thermal growth regions. In the initial growth region including surface tension controlled, transition and inertia controlled regions as divided by Robinson and Judd, the bubble growth rate showed that the bubble radius was proportional to $t^{2/3}$ regardless of working fluids and heating conditions. And in the thermal growth region as also called asymptotic region, the bubble showed a growth rate that was proportional to $t^{1/5}$, also. Those growth rates were slower than the growth rates proposed in previous analytical analyses. The required heat flow rate for the volume change of the observed bubble was estimated to be larger than the heat flow rate measured at the wall. Heat, which is different from the instantaneous heat supplied through the heating wall, can be estimated as being transferred through the interface between bubble and liquid even with saturated pool condition. This phenomenon under a saturated pool condition needs to be analyzed and the data from this study can supply the good experimental data with the precise boundary condition (constant wall temperature).

• 한국안전학회지
• /
• 제8권2호
• /
• pp.64-71
• /
• 1993

In this study, the purpose is to investigate the influence of initial residual stresses on the fatigue crack growth behaviors after the distribution of initial residual stresses Is measured when the crack is growing from the compressive residual stresses field to the tensile residual stress field. Also, the Influence of the variation of residual stress distribution on the fatigue crack growth behaviors at the crack tip is studied when the initial crack li applied on base metal, weld metal and HAZ respectively.

• 말소리와 음성과학
• /
• 제9권3호
• /
• pp.17-23
• /
• 2017

The present study investigates the effect of Accentual Phrase on F0 using a subset of large-scale corpus of Seoul Korean. Four syllable words which were neither preceded nor followed by silent pauses were presumed to be canonical exemplars of Accentual Phrases in Korean. These four syllable words were extracted from female speakers' speech samples. Growth curve analyses, combination of regression and polynomial curve fitting, were applied to the four syllable words. Four syllable words were divided into four groups depending on the categorical status of the initial segment: voiceless obstruents, voiced obstruents, sonorants, and vowels. Results of growth curve analyses indicate that initial segment types have an effect on the F0 (in semitone) in the nucleus of the initial syllable, and the cubic polynomial term revealed that some of the medial low tones in the 4 syllable words may be guided by the principle of contrast maximization, while others may be governed by the principle of ease of articulation.

• 한국환경보건학회지
• /
• 제24권2호
• /
• pp.104-109
• /
• 1998

The objective of this study was to examine the effect of polymer coating on the initial microorganism attachment and the biofilm growth. Such as nonion(polyacrylamine), anion(CMC-Na) and cation polymer coagulant(chitosan and PEI) were used for coating material of the support carrier(acryl plate). When polymer coagulant was coated with 5, 10, 20, 35, 50, 100 and 200 mg/l on the surface of acryl plate, initial microorganism attachment increased and optimum concentration for the attachment was 35 mg/l. Biofilm growth experiments were conducted with the substrate loading of 12.7gSCOD/$m^2\cdot$ day using RBC. The polymer coagulants such as CMC-Na, polyacrylamide, PEI and chitosan coating on the acryl plate facilitated the biofilm growth of microorganisms. Until the biofilm dry weight grows up to 0. 0038g/cm$^2$, biofilm growth on the plate coated with cation polymer like chitosan was better than that on the coated plate of nonion(polyacrylamine), anion(CMC-Na) polymer coagulant.

• 한국미생물·생명공학회지
• /
• 제23권4호
• /
• pp.479-484
• /
• 1995

The effect of initial cell concentration on the characteristics of ethanol fermentation was investigated in the batch fermentation of Saccharomyces cerevisiae ATCC 24858. The characteristics were investigated in the range of 60 to 230 g/l of the initial sugar concentrations and 0.5 to 85 g/l of the initial cell concentrations. When the initial cell concentrations were 27 g/l for 60 g/l of the initial sugar and 85 g/l for 230 g/l, the fermentation time required for the complete consumption of the initial sugar was one hour, respectively. The ethanol productivity increased with the initial cell concentration so that, in the case of 100 g/l of initial sugar, the productivity rose up to 55 g/l/hr at 55 g/l of the initial cell concentration. The specific growth rate decreased according to the increase in the initial biomass concentration and finally became zero at around 25 g/l of the cell concentration regardless of the initial sugar concentration. The specific ethanol production rate was constant as 1.02 g/l/hr up to 150 g/l of the initial sugar. However, the rates decreased sharply with the augmentation of concentration of the initial sugar above 160 g/l. The overall ethanol yield represented a constant value, 0.475 g/g irrespective of the initial cell and sugar concentrations. The overall biomass yietd showed a trend to diminish in values with the biomass and ultimately to reach zero more than 25 g/l of the initial cell concentration.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.162-162
• /
• 2012

ZnPc and CuPc molecules stacked similar way in the film, but showed different growth modes in thermal evaporation. The distribution of CuPc crystals did not change by the film thickness, whereas the distribution of ZnPc became random as the increase of the film thickness. The disc type nanograins of CuPc were quite regularly distributed at the initial growth regime and the regular distribution of nanograins was kept during the film growth. On the other hand, ZnPc consisted in ellipsoid shaped nanograins and the distribution of nanograins was not regular in the initial growth regime. The irregular distribution of nanograins changed to the regular mode at the later growth regime by showing structure factor in GISAXS measurement. The different initial nanograin distribution in ZnPc and CuPc was related to the different nanostructure in the mixed layer with C60 to form the bulk heterojunction.