• 한국구조물진단유지관리공학회 논문집
• /
• 제15권4호
• /
• pp.136-145
• /
• 2011

준설매립후 연직배수공법을 적용하여 지반개량을 수행하는 대규모 국가산업단지 조성 프로젝트를 대상으로, 각 심도별 채취된 불교란 시료를 이용하여 물리즉 특성 및 압밀 특성 등을 분석하기 위한 실내시험을 실시하였으며, 수평 압밀계수 및 현장 초기 응력 산정을 위한 콘 관입 및 소산시험을 수행하였다. 지층을 구성하고 있는 하부의 원지반 점토층과 상부의 준설 매립층은 유사한 해성점토로 구성되어 있으나, 초기 간극비와 초기 함수비, 초기 응력상태, 방향별 투수성과 압축성 등의 압밀특성에 있어서는 시간경과에 따른 압밀거동에 있어 매우 큰 차이를 보이는 다층 지반의 특성을 띠고 있다. 압밀과 관련된 응력이력이 다른 두지층의 초기응력을 산정하기 위하여 콘 관입시험 및 소산시험시의 간극수압 측정결과를 분석하였으며, 이를 통해 압밀이 진행중인 하부 원지반 점토층에서의 매립하중과 상부 성토에 의한 각 심도별 과잉간극수압 분포 및 이를 통한 초기응력을 산정할 수 있었다.

• 한국지반공학회논문집
• /
• 제18권6호
• /
• pp.33-42
• /
• 2002

지반 굴착시 지반의 변위특성과 지보재의 설치시기에 대한 중요한 정보를 제공하는 지반반응곡선(Ground reaction curve)을 구하는 방법은 일반적으로 원형단면이고 측압계수 K＝1.0인 상태를 가정한 closed from solution을 통해서 구해지지만, 실제 현장에서는 주로 마제형 굴착단면이 사용되며 $K\neq$1.0인 경우 대부분이다. 지반 굴착시 측압계수와 굴착 형상에 따라 측벽에서의 초기탄성변위 및 임계지보압이 변화하는 경향을 알아보기 위하여 측압계수 값을 0.5～3.0 사이에서 변화시키고, 각 측압계수마다 초기연직응력을 5～30MPa 사이에서 변화시켜가면서 원형단면과 마제형 단면인 경우를 구분하여 수치해석을 통해 지반반응곡선을 얻었다. Closed form solution에 의해 얻어진 지반반응곡선은 측압계수와 굴착단면의 형상을 고려하지 못하기 때문에 $K\neq$1.0인 실제 지반에 대한 변위거동과 지반의 자립성을 평가하는 데 큰 오차를 유발할 수 있는 것으로 나타났다. 따라서, Closed from solution에 의해 지보재의 설치시기를 예측하는 것은 많은 오차를 수반하는 과정이므로, 수치해석을 통한 지보설치 시기와 자립성에 대한 검토를 수행하는 것이 바람직 할 것으로 판단된다.

• 한국안전학회지
• /
• 제21권1호
• /
• pp.41-47
• /
• 2006

This paper introduces stress monitoring system for buried gas pipeline in poor ground. During the six months of improvement construction of poor ground, maximum settlement of gas pipeline is about 40 cm. This value represents relative small compared to the initial settlement estimation of ground improvement construction plan, 90 cm. Also, this paper includes the result of finite element analysis of gas pipeline to confirm safety of pipelines in poor ground. The stress monitoring system for gas pipeline was developed to guarantee the safety of buried gas pipeline in poor ground. Eventually, the ground improvement workings are ended safely and it is proved that the pipeline has no safety problem.

• 한국지반공학회논문집
• /
• 제27권5호
• /
• pp.17-31
• /
• 2011

본 연구에서는 흙막이 굴착 공사시 지하수저하에 의한 주변 지반의 공학적 거동에 관한 수치해석 연구내용을 다루었다. 먼저 2차원 간극수압-응력 연계해석을 통하여 굴착공사가 지반침하 거동에 미지는 영향을 알아보았으며 그 결과를 토대로 벽체 수평변형, 벽체배변 변형, 소성변형률 분포, 유효응력분포 및 버팀보 축력분포 등을 분석을 수행하였다. 한편 다양한 지층조건과 초기 지하수위 조건에 대한 매개변수 연구를 통하여 주변지반 및 버팀보의 거동을 분석하였으며 해석 결과를 토대로 특정조건의 최대 지반변형범위를 제안하였다.

• 한국농공학회논문집
• /
• 제66권1호
• /
• pp.15-24
• /
• 2024

Unlike artificially created homogeneous materials, the process of calculating the elastic modulus of natural soil involves the possibility of errors. Because the stress-strain behavior of soil is nonlinear, the secant modulus of elasticity is often used based on 1/2 of the stress at failure. Since soil has the property of changing its elastic modulus depending on the confining pressure, numerical analysis models that analyze its behavior inevitably include complex elements. The hyperbolic model, which relatively accurately simulates the behavior immediately after loading in soft ground, assumes that the stress-strain curve of the consolidated undrained triaxial test is hyperbolic and requires the slope of the tangent line at the starting point. However, the slope of the initial tangent in the stress-strain curve obtained from an actual triaxial test is difficult to have regularity according to changes in confining pressure. Additionally, due to the characteristics of a hyperbola, even small changes in related factors cause large changes in the hyperbola. Therefore, there is a lot of randomness in the process of calculating model parameters from the triaxial test results, which causes large differences in the results. Therefore, the method of calculating the initial elastic modulus by the consolidation test presented in this study is also used to verify the method by the triaxial test. It can be applied. However, since this study was applied to only one sample showing typical consolidation characteristics, it is necessary to check samples with various physical properties in the future.

• 터널과지하공간
• /
• 제14권5호
• /
• pp.345-352
• /
• 2004

숏크리트 지보 구조는 지반과 숏크리트가 일체화되어 숏크리트 라이닝에 전단력의 전달이 가능한 터널구조로서 안정한 구조물을 형성하는데 기여한다. 본 연구에서는 석고를 사용하여 일정한 강도를 가진 균질한 모형지반을 제작하였다. 하중재하에 의해 일정한 원지반 응력을 조성한 후 상$.$하부반단면 굴착공법으로 굴착하며 굴착시 터널 주변지반의 응력상태와 라이닝의 거동특성을 계측하였다. 측정결과 굴착으로 인하여 터널 주변지반과 라이닝에 접선방향으로 인장응력이 발생되었다. 단계굴착에 의한 응력 해방율은 상부 경계선 확대천공시 9%, 상부반단면 아치부 확대천공시 15%, 상부반단면 경계선 절단 즉시 48%, 안정화 후 하부반단면 굴착전 94%로 나타났다.

• 산업기술연구
• /
• 제26권B호
• /
• pp.93-99
• /
• 2006

Centrifuge model experiments were performed to investigate the confining effects of the sheet piles, installed to the sides of soft clay ground treated with sand compaction piles, on the bearing capacity and concentration ratio of composite ground. For the given g-level in the centrifuge model tests, replacement ratio of SCP and the width of surcharge loads on the surface of ground with SCP, the confining effects of installing the sheet piles on the edges of SCP ground on the bearing capacity, change of stress concentration ratio and failure mechanism were investigated. Kaolin, one of typical clay mineral, and Jumunjin standard sand were used as a soft clay ground and sand compaction pile irrespectively. As results of experiments, lateral confining effect by inserting the model sheet piles fixed to the loading plate was observed. For the strip surcharge loading condition, the yielding stress intensity in the form of the strip surcharge loads tends to increase with increasing the embedded depth of sheet piles. The stress concentration ratio was found not to be influenced consistently with the embedded depth of sheet piles whereas the effect of stress intensity on stress concentration ratio shows the general trend that values of stress concentration ratio are relatively high at the initial stage of loading and tend to decrease and converge to the certain values. For the failure mechanism in the case of reinforced with sheet piles, displacement behavior related to the punching failure, settlement right beneath the loading plate occurred since the soil was confined with sheet piles, was observed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.13-20
• /
• 2010

This paper presents the results of a numerical investigation on the ground deformation in deep excavation with emphasis on the groundwater lowering. Using the stress-pore pressure coupled analysis Consideration to the effect of ground excavation and groundwater interaction were carried out and a series of two-dimensional finite element model was employed to perform a parametric study on a wide range of soil profile and initial ground water table condition.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.188-194
• /
• 2009

Consolidation settlement, a crucial parameter in geotechnical design of soft ground, has not been computed in a unique way due to different computation methods in practice. To improve computational error in calculating consolidation settlement, a number of researches has been attempted. Conventional 1-dimensional consolidation theory assumes the center of the clay layer as the representative point to obtain effective stress in calculation, which could resort to erroneous results. To calculate exact solutions considering initial distribution of effective stress, diving a stratum into multi-layers could resort to wasting time and effort. In the study, a novel methodology for calculating consolidation settlement via Guassian quadrature is developed. The method generally is capable of computing settlements in any case of the stress conditions encountered in fields.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.624-629
• /
• 2008

When TBM excavates a tunnel, existing concrete lining segments are used as supporting structures for driving force. Axial stress on the lining segments are apt to be large in case of direct driving force. However, it drastically decline as it is farther and father from TBM and later, it tends to converge after a certain point. Such tendencies show similar results of finite element analysis. At the initial intervals, the values of finite element analysis are larger, while at the later intervals, the actual stress values are larger. It concludes that such tendencies are attributable to that the concrete lining segments have partially burst and cracked in the axial direction at the initial intervals. And differences of stresses at the later intervals are created by the changed plasticity of ground and the friction on the external sides of the lining segments.