• Clean Technology
• /
• v.17 no.1
• /
• pp.48-55
• /
• 2011

The application of fibrous activated carbon (FAC)-titanium dioxide ($TiO_2$) hybrid system has not been reported yet for the control of malodorous dimethyl sulfide (DMS) at residential environmental levels. Accordingly, the current study was designed not only to characterize this hybrid system using x-ray diffraction method, particulate surface measurement and Fourier transform Infrared (FTIR) method, but also to evaluate its adsorptional photocatalytic activity (APA) for the DMS removal. The physical/surface characteristics of FAC-$TiO_2$ which was prepared in this study suggested that the hybrid material might have certain APA for DMS. The Brunauer-Emmett-Teller (BET) specific area, total pore volume, micropore volume and mesopore volume decreased all as the $TiO_2$ amounts coated on FAC increased, whereas the reverse was true for average pore diameter. $TiO_2$ coated onto FAC did not influence the adsorptional activity of FAC for the DMS input concentration of 0.5 ppm. The APA test of the hybrid material presented that the initial removal efficiencies of DMS were 93, 78, 71 and 57% for the flow rates of 0.5, 1.0, l.5 and 2.0 L/min, respectively, and they decreased somewhat 2 h after the experiment started and kept almost constant for the rest experimental period. Under this pseudo-equilibrium condition, the DMS removal efficiencies were 78, 58, 53 and 36% for the four flow rates, respectively. Meanwhile, there were no significant byproducts observed on the surfaces of the hybrid material. Consequently, this study suggests that, under the experimental conditions used in the present study, the hybrid material can be applied for DMS at residential environment levels without being interfered by any byproducts.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.3
• /
• pp.209-214
• /
• 2010

Purpose: The purpose of this study was to investigate whether the re-osseointegration of the implants that had mechanical unscrewing possibly occurred or not. Furthermore, if it happened, the degree of re-osseointegration was evaluated by comparing with previous osseointegration. Materials and methods: The smooth implant (commercial pure titanium 99%) specimens, whose diameter and length was 3.75 mm, 4 mm, respectively were produced. Two implants were inserted into each tibia of 7 New Zealand female white rabbits weighing at least 3.0 kg. The torque removal force for each implant after 6 weeks of implants placement was measured and included in group I. The torque removal forces were assessed after the fixtures were re-screwed to original position and the subjects were allowed to have 4 more weeks for healing and included in group II. One rabbit was sacrificed after first measurement and produced 4 slide specimens in group I, and two rabbits were sacrificed after 2nd measurement, 7 slide specimens, in group II for histomorphologic investigations. All slide specimens were assessed based on the proportion of BIC (bone-implant contact) as well as CBa (Bone area in the cortical passage) value produced by counting the screw threads embedded in the compact bones under the optical microscopic analysis (${\times}20$). Statistical analysis was conducted to evaluate the torque removal force, BIC and CBa between group I and II. Results: As for the torque removal force, the result was $10.8{\pm}3.6$ Ncm for group I and $20.2{\pm}9.7$ Ncm for group II. Furthermore, the torque removal force of group II increased by 98.1% in average compared to group I (P<.05). On the other hand, histomorphologic analysis displayed that there was no statistical significance in BIC and CBa values between group I and the group II (P>.05), and RT/BIC and RT/CBa between group I and group II were statistically significant (P<.05). Conclusion: It is possible to obtain more substantial re-osseointegration within shorter periods than the period needed for the initial osseointegration in case of iatrogenically unscrewed implants.

• Journal of Korean Society of Forest Science
• /
• v.49 no.1
• /
• pp.6-10
• /
• 1980

The witches' broom disease of Paulownia tomentosa (Thunb.) Steud with which mycoplasmalike organisms are associated is widespread throughout Korea and poses serious threat to the cultivation of paulownia. Attempt was made to investigate the feasibility of field control of the disease with oxytetracycline hydrochloride (OTC). A total of 84 paulownia trees (6 year-old, DBH: 10-15cm) exhibiting severe symptoms of witches' broom were selected and treated during March to September. Solution of 1-10g of OTC dissolved in 0.1­2.0 of water was transfused into infected trees with gravity flow method from a dark-brown colored plastic reservoir (11 volume) through plastic tubes (1.2m long) connected to 2-4 holes (5 mm in diameter and 4-5cm in depth) bored in the basal part of the tree trunks (Fig. 1 and 2). Of 60 diseased paulownia trees injected with 2g of OTC in 0.1-2.0l of water during May to September, 1979, 58 trees resulted in complete remission of symptom development and resumption of healthy new growth at least up to September, 1980 when the last observation of the effect of OTC treatment for this experiment was made. The rest of two trees were dead probably due to too severe infection. Of 24 paulownia trees treated in March and April, 1979 complete remission of symptom development was obtained with 8 trees, and nine trees were partially prevented from symptom development in the following season. The remaining 7 trees were dead due to failure in uptake of OTC and partly because the trees were in too far advanced stage of infection. Application of highly concentrated solution of 2g of OTC dissolved in 0.1-0.2l of water per tree was just as effective as the 2g/1-2l treatment. Injection of 2g/1-2l required 3-4 days while treatment of 2g/0.1-0.2l reduced the time for injecting one tree down to less than 24 hrs. The result of this experiment demonstrates that basal trunk injection of 2g OTC/0.1-0.2l/tree is feasible for field control of paulownia witches' broom, provided that tree injection is performed in actively growing season (May-September) and at the initial stage of disease development.

• Progress in Medical Physics
• /
• v.14 no.4
• /
• pp.211-217
• /
• 2003

The Principal component analysis (PCA) is a well-known data analysis method that is useful in linear feature extraction and data compression. The PCA is a linear transformation that applies an orthogonal rotation to the original data, so as to maximize the retained variance. PCA is a classical technique for obtaining an optimal overall mapping of linearly dependent patterns of correlation between variables (e.g. neurons). PCA provides, in the mean-squared error sense, an optimal linear mapping of the signals which are spread across a group of variables. These signals are concentrated into the first few components, while the noise, i.e. variance which is uncorrelated across variables, is sequestered in the remaining components. PCA has been used extensively to resolve temporal patterns in neurophysiological recordings. Because the retinal signal is stochastic process, PCA can be used to identify the retinal spikes. With excised rabbit eye, retina was isolated. A piece of retina was attached with the ganglion cell side to the surface of the microelectrode array (MEA). The MEA consisted of glass plate with 60 substrate integrated and insulated golden connection lanes terminating in an 8${\times}$8 array (spacing 200 $\mu$m, electrode diameter 30 $\mu$m) in the center of the plate. The MEA 60 system was used for the recording of retinal ganglion cell activity. The action potentials of each channel were sorted by off­line analysis tool. Spikes were detected with a threshold criterion and sorted according to their principal component composition. The first (PC1) and second principal component values (PC2) were calculated using all the waveforms of the each channel and all n time points in the waveform, where several clusters could be separated clearly in two dimension. We verified that PCA-based waveform detection was effective as an initial approach for spike sorting method.

• Korean Journal of Ichthyology
• /
• v.19 no.2
• /
• pp.107-111
• /
• 2007

Sex differentiation of the brown croaker Miichthys miiuy (Basilewsky) is described from hatching to the 120th day post-hatching (dph) (water temperature $24^{\circ}C$). Primordial germ cells (PGCs) were observed on the 20th dph (10.4 mm total length (TL), 0.14 g body weight (BW), and began to protrude into the peritoneal cavity from the 40th dph (19.4 mm TL, 0.39 g BW). On the 65th dph (31.3 mm TL, 0.93 g BW, $1,560D^{\circ}$ (degree-days)), initial ovarian differentiation was identified by the PGCs with condensed chromatin, and their transformation into meiotic oocytes. By the 120th dph (4.60 mm TL, 1.38 g BW, $2,880D^{\circ}$), the oocytes were in the perinucleolus stage and had increased from 20 to $40{\mu}m$ in diameter. While ovaries gradually grew after sex was differentiated, testes continued to multiply from the 65th dph. On the 80th dph (37.9 mm TL, 1.39 g BW, $1,920D^{\circ}$), the beginning of testis lobule formation was indicated by the occurrence of spermatogonial cysts enveloped by somatic cells in some of the testes. On the 120th dph, the testis lobules of some of the fish contained all germ cell stages through to the spermatocytes. Therefore, the sex differentiation type of the brown croaker is identified as gonochoristic.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.180-186
• /
• 2008

Purpose: This study was performed to evaluate the effect of the implant recipient site preparation methods on primary stability of implants with the instruments of $Osstell^{TM}$ and $Periotest^{(R)}$ in the iliac bone of cadaver. Methods and materials: The 8 iliac bones in 4 cadavers and implants treated with resorbable blasting media (RBM) were used. $Periotest^{(R)}$ (Simens AG, Germany) and $Osstell^{TM}$ (Model 6 Resonance Frequency Analyser: Integration Diagnostics Ltd., Sweden) were used to measure primary stability of implants. Implants were inserted into the iliac crest of the cadaver. In control group, the recipient site was prepared according to the manufacturer's recommendation: 1.8 mm guide drill, 2.0 mm initial drill, 2.7 mm pilot drill, 2.7 mm twist drill, 3.0 mm twist drill, 3.3 mm pilot drill, 3.3 mm twist drill, and 3.3 mm countersink drill as well as tapping drill were used in order. In the group 1, implant recipient sites were prepared by sequentially drilling from 1.8 mm guide drill to 3.0 mm twist drill and then inserted implants without countersinking and tapping. In the group 2, implant recipient sites were prepared to 3.0 mm twist drill and countersink drill and then inserted implants without tapping. In the group 3, the sites were prepared to 3.0 mm twist drill and countersink drill as well as tapping drill. In the group 4, the sites were prepared to 3.3 mm twist drill. In the group 5, the sites were prepared to 3.3 mm twist drill and countersink drill. A total of 60 implants were placed (n=10). The stability was measured using $Osstell^{TM}$ and $Periotest^{(R)}$ mesiodistally and buccolingually. To compare the mean stability of each group statistically, One-way ANOVA was used and correlation of instrument were analyzed using SPSS 12.0. The results obtained were as follows; 1. The stability of group 1 measured using $Osstell^{TM}$ and $Periotest^{(R)}$ buccolingually showed the highest, and there are significant difference statistically between control group and experimental group 1,2,4 in each instruments respectively (p<0.05). 2. The stability of group 1 measured using $Osstell^{TM}$ and $Periotest^{(R)}$ mesiodistally showed the highest. There are significant difference statistically between control group and all experimental groups in $Osstell^{TM}$, and between control group and experimental group 1,2,3,4 (p<0.05). 3. There are high correlation between the measurements of $Osstell^{TM}$ and $Periotest^{(R)}$ (p<0.05). Conclusion: These results indicate that the primary stability of implant can be obtained by the recipient sites preparation with smaller diameter drill than that of implant or minimal drilling.

• Korean Journal of Environmental Biology
• /
• v.32 no.2
• /
• pp.138-152
• /
• 2014

The objective of the study survey was to determine the effect of marine sand extraction on community composition and rate of recolonization of the meiobenthos following cessation of mining activities. Because of meiobenthic distribution in nature, high abundance, intimate association with sediments, fast reproduction, benthic larva period, sensitivity to pollution and rapid life histories, meiobenthos are widely regarded as ideal organisms to study the potential ecological indicator of natural and anthropogenic stresses. The community structure of meiobenthos was studied at seven stations within sandy tidal and sub tidal zones in Jangbongdo in the Yellow Sea, Korea from Aug. 2006 to Dec. 2007. Meiobenthic samples were collected by three core samples, with a 3.6 cm in diameter, from each sediment sample taken with a Smith-McIntyre Grab. It was found that sand mining often causes complete removal of the sediment and the damage to the habitats of meiobenthos. This study in the effect showed that sand mining resulted in a reduction in total abundance and biomass of meiobenthos in mining area. The finding of this study further showed that initial restoration of abundance and biomass within one year of the cessation of sand mining.

• Radiation Oncology Journal
• /
• v.20 no.4
• /
• pp.303-308
• /
• 2002

Purpose : To determine the optimal radiation dose in a localized non-Hodgkin's lymphoma of the head and neck in the treatment setting for combined chemoradiotherapy. Materials an Methods :Fifty-three patients with stage I and II diffuse large ceil non-Hodgkin's lymphoma of the head and neck, who were treated with combined chemoradiotherapy between 1985 and 1998 were retrospectively reviewed. The median age was 49 years, and the male-to-female ratio was approximately 1.6. Twenty-seven patients had stage 1 disease and 26 had stage II. Twenty-three patients had bulky tumors $(\geq5\;cm)$ and 30 had non-bulky tumors (<5 cm). The primary tumors arose mainly from an extranodal organ $(70\%)$, most cases involving Waldeyer's ring $(90\%)$. All patients except one were initially treated with $3\~6$ cycles of chemotherapy, which was followed by radiotherapy. Radiation was delivered either to the primary tumor area alone $(9\%)$ or to the primary tumor area plus the bilateral neck nodes $(91\%)$ with a minimum dose of 30 Gy $(range\;30\~60\;Gy)$. The failure patterns according to the radiation field were analyzed, and the relationship between the dose and the in-field recurrence was evaluated. Results : The 10-year overall survival and the 10-year disease free survival rates were similar at $75\%\;and\;76\%$, respectively. A complete response (CR) after chemotherapy was achieved in 44 patients $(83\%)$. Subsequent radiotherapy showed a CR in all patients. Twelve patients $(23\%)$ had a relapse of the lymphoma after the initial treatment. Two of these patients had a recurrence inside the radiation field. No clear dose response relationship was observed and no significant prognostic factors for the in-field recurrences were identified because of the small number of in-field recurrences. However, for patients with tumors <5 cm in diameter, there were no in-field recurrences after a radiation dose 30 Gy. The 2 in-field recurrences encountered occurred in patients with a tumor $\geq5\;cm$. Conclusion .A dose of 30 Gy is sufficient for local control in patients with a non-bulky (<5 cm), localized, diffuse large cell non-Hodgkin's lymphoma when combined with chemotherapy. An additional boost dose in the primary site is recommended for patients with bulky tumors $(\geq5\;cm)$.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3263-3291
• /
• 1974

Experimental work of grain bin was carried out to develop the methods of natural air in-bin drying and storage. The method is considered to be more economical, labour saving, and an effective countermeasure to grain loss. To examine the possibility of farm use of the grain bin and to analyze the related factors concerned with in-bin grain drying and storage, ambient air conditions (especially the change of air temperature and relative humidity) and grain quality during drying and storage periods were investigated. A laboratory model bin was constructed to investigate the effect of different forced air conditions on the drying characteristics of rice. In addition, a grain bin with 2.2m diameter and 1.8m height, considered to be the optimum size for the average Korean farm, was constructed and tested to examine the drying and storing characteristics of rice. The weather data analyzed in this study was the nine-year (from 1964 to 1972) record of air temperature and relative humidity in the Suweon area, and the thirty-year (from 1931 to 1960) record of pentad normal relative humidity and air temperature in the Seoul area. From the results of the weather data analyses, the adequate air delivery hours (which was arbitrary defined as the condition to give less than 75% relative humidity) to dry the rice during October were about nine hours (from approximately 10 A.M. to 7 P.M, ) a day, in which the average air temperature was about 15.9$^{\circ}C$ and average relative humidity was 66%. The occurence of days having three hours of such conditions was 1, 2, and 1-day within the 1st, 2nd add last 10-day periods for the month of October, respectively. Therefore, it may be considered that the weather condition in October was satisfactory for the forced natural air drying. The results of the laboratory model bin test were analyzed to obtain the drying curve and drying rate for different drying stages and grain layers in the bin corresponding to various conditions of forced natural air. A drying experiment with a prototype grain bin showed that an approximate 5 percent grain moisture gradient through a 1.6 meter grain deposit was observed after 80 hours of intermittent drying, giving an over dried zone in the lower grain layers and an extremely high grain moisture zone in the upper layers. This indicates that an effective measure should be taken to reduce this high moisture gradient. In order to investigate the drying characteristics of bulk grain in a layerturning operation a grain bin test was performed. This showed a significant improvement of uniform drying. In this test, approximate 107 hours were required to dry a depth of 1.6 meter of grain from an initial moisture content of 22.2 percent to a moisture content of 16.7 percent using an air delivery rate of 2.8 cubic meter per a minute per every cubic meter of grain. This resulted in a 2 percent moisture gradient from the top to the bottom of the bin. During storage period, till the end of June the average temperature of grain was 2~3$^{\circ}C$ higher than ambient air temperature. But during July when the grain moisture content went up slightly (less than 1 percent), the average temperature of the grain also increased to 3~5$^{\circ}C$ higher than ambient air temperature. It is therefore recommended that for safe grain storage, grain should not be stored in sheet metal bins after mid May. From the above results, in-bin rice drying and storage can be used effectively on Korean farms. It is strongly recommended that the use of grain-bin system should be implemented for farm use to improve farm drying and storage of rice.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.1
• /
• pp.18-22
• /
• 2002

This experiment was conducted to investigate the effect of night illumination on the growth and yield of wheat and barley. Three varieties of barley and four cultivars of wheat were tested under the different night illuminance which was controlled in the range of 1.2∼20 Lux during whole growth season at night. As night illumination was stronger, the culm length of all varieties tended to be shorter. The shortening was greater in barley than wheat. Node number, awn length and culm diameter tended to decrease as the light intensity was stronger. Internode length above the 4th and 5th node was remarkably decreased by the stronger illuminance. The degree of decrease in spike length affected by the night illuminance was much larger in the late-maturing variety among wheat cultivars. As night illumination was stronger, days to heading was shortened in general. The range of decrease was 2 to 10 days under 10∼20 Lux condition similarly in both barley and wheat. Effect of night illumination on heading date and days from initial heading to full heading was not considerably different between the crops and among varieties except Kangbori. Night illumination decreased the grain yield by 12.5% in barley, and 11.0% in wheat at 2.1∼5.0 Lux condition, and 34.6% in barley, and 29.3 % in wheat at 10∼20 Lux condition compared to control. Yield reduction was significantly different among varieties, being greatest in Kangbori among barley varieties, and in Chokwang (late-maturring variety) and Changkwang (late-maturring variety) among wheat varieties. It was interpreted that the decrease of grain yield was resulted from the decrease in the number of spikes and the number of grains per spike under the stronger night illumination. The decrease of grain yield was more directly attributed to the decrease in the number of grains per spike.