• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2005년도 추계 학술발표회 논문집
• /
• pp.37-41
• /
• 2005

Exploratory data analysis(EDA) is the initial stage of data analysis and provides a useful overview about the whole microarray experiment. If the experiments are replicated, the analyst should check the quality and reliability of microarray data within same experimental condition before the deeper statistical analysis. We shows EDA method focusing on the quality and reproducibility for replicates.

• 한국가구학회지
• /
• 제19권2호
• /
• pp.116-123
• /
• 2008

Kiln schedule development was based on two schedule phases, the first being to determine the maximum safe kiln temperature during the check prone initial stage of drying, with the second stage determining how to accelerate drying once the danger of checking had passed. This was achieved by using 38 mm thick boards which were pre-screened for susceptibility to internal checking, and then drying matched sample boards over a range of kiln temperatures. Research has shown that below 50% MC there is no further risk of internal checking. However, difference in drying rate due to board width and the increased occurrence of wet patches in wide boards means that it is essential to modify the basic schedule according to the maximum board width. A condition of 52/40 $^{\circ}C$ was selected for the checking-free initial kiln drying step and a 5-step kiln-schedule dried the boards from 109% to 8% MC for 72.5 hours without internal checking.

• ETRI Journal
• /
• 제35권6호
• /
• pp.1094-1104
• /
• 2013

Home appliance manufacturers have recently been trying to provide smart products capable of various Internet services. For example, one health care manufacturer provides a Wi-Fi-capable scale. Once users register their information with the manufacturer's server, their weight and body fat records are automatically uploaded to the server whenever they measure their weight. The users can then watch and check their weight log easily using a smart device, such as a smartphone or tablet. One of the biggest problems, however, is that the initial configuration of the appliances and the user registration process may be quite complicated to typical users who are unfamiliar with such IT devices. This paper proposes an autoconfiguration system structure and protocol for Internet-capable home appliances, which supports the initial configuration and remote maintenance service of the device with only little user effort. Manufacturers can develop their own information appliances and provide differentiated services using the proposed system and protocol.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.441-448
• /
• 2000

An investigation into the nonlinear free vibrations of a cantilever beam which can have not only planar motion but also nonplanar motion is made. Using Galerkin's method based on the first mode in each motion, we transform the boundary and initial value problem into an initial value problem of two-degree-of-freedom system. The system turns out to have two normal modes. By Synge's stability concept we examine the stability of each mode. In order to check validity of the stability we obtain the numerical Poincare map of the motions neighboring on each mode.

• 천문학회지
• /
• 제47권3호
• /
• pp.87-98
• /
• 2014

We develop a parallel cosmological hydrodynamic simulation code designed for the study of formation and evolution of cosmological structures. The gravitational force is calculated using the TreePM method and the hydrodynamics is implemented based on the smoothed particle hydrodynamics. The initial displacement and velocity of simulation particles are calculated according to second-order Lagrangian perturbation theory using the power spectra of dark matter and baryonic matter. The initial background temperature is given by Recfast and the temperature uctuations at the initial particle position are assigned according to the adiabatic model. We use a time-limiter scheme over the individual time steps to capture shock-fronts and to ease the time-step tension between the shock and preshock particles. We also include the astrophysical gas processes of radiative heating/cooling, star formation, metal enrichment, and supernova feedback. We test the code in several standard cases such as one-dimensional Riemann problems, Kelvin-Helmholtz, and Sedov blast wave instability. Star formation on the galactic disk is investigated to check whether the Schmidt-Kennicutt relation is properly recovered. We also study global star formation history at different simulation resolutions and compare them with observations.

• 한국항공운항학회지
• /
• 제26권4호
• /
• pp.54-63
• /
• 2018

Airlines are promoting self-service based technology by introducing mobile check-in, Kiosk and self-back drop systems, which will help customer satisfaction and efficiency. This study is about the usage intension to use Technology-based Airline Self-Service, the purpose of this study is to examine the key variables affecting Unified Theory of Acceptance (UTAUT2) in using Technology-based Airline Self-Service. According to the results of the ANOVA, there was a significant difference among the groups according to the experience of the self-service device. And analysis results using Structural Equation Model(SEM) was suggested that the performance expectation and hedonic motive of UTAUT2 model were found to have significant influence on initial trust. Also, initial trust affects the intention to use. There are some moderating effects on the structural equation by groups according to the experience of the self-service device. This research has significance in that it can help establish a marketing strategy of airlines to expand the self-service based on the airline technology.

• 한국농공학회논문집
• /
• 제66권1호
• /
• pp.15-24
• /
• 2024

Unlike artificially created homogeneous materials, the process of calculating the elastic modulus of natural soil involves the possibility of errors. Because the stress-strain behavior of soil is nonlinear, the secant modulus of elasticity is often used based on 1/2 of the stress at failure. Since soil has the property of changing its elastic modulus depending on the confining pressure, numerical analysis models that analyze its behavior inevitably include complex elements. The hyperbolic model, which relatively accurately simulates the behavior immediately after loading in soft ground, assumes that the stress-strain curve of the consolidated undrained triaxial test is hyperbolic and requires the slope of the tangent line at the starting point. However, the slope of the initial tangent in the stress-strain curve obtained from an actual triaxial test is difficult to have regularity according to changes in confining pressure. Additionally, due to the characteristics of a hyperbola, even small changes in related factors cause large changes in the hyperbola. Therefore, there is a lot of randomness in the process of calculating model parameters from the triaxial test results, which causes large differences in the results. Therefore, the method of calculating the initial elastic modulus by the consolidation test presented in this study is also used to verify the method by the triaxial test. It can be applied. However, since this study was applied to only one sample showing typical consolidation characteristics, it is necessary to check samples with various physical properties in the future.

• 정보보호학회논문지
• /
• 제17권4호
• /
• pp.53-60
• /
• 2007

기지 평문 공격 시나리오에서 스트림 암호에 대한 고속 상관 공격은 매우 강력한 공격 방법이다. 대부분의 고속 상관 공격은 암호학적인 문제를 적당한 디코딩 문제의 관점에서 접근한다. 본 논문에서는 이진 대칭 채널의 출력 값으로부터 입력 값을 복구하기 위해 사용되는 패리티 검사 방정식과 Fast Walsh Transform을 이용한 Chose등이 제안한 고속 상관 공격과 Zhang 등이 제안한 다중 경로 고속 상관 공격을 개선한 다중 경로 고속 상관 공격을 제안한다. 이 공격기법은 기 제안된 공격 기법들과 마찬가지로 표적 LFSR(Linear Feedback Shift Register)의 초기 상태 값 중 일부를 추측하나, Zhang 등이 제안한 기법보다 각 경로에서 한 비트씩을 더 복구 할 수 있어 보다 효율적인 공격이 가능하게 한다.

• Journal of Periodontal and Implant Science
• /
• 제36권1호
• /
• pp.69-84
• /
• 2006

Reports on the comparison of clinical effect between non-surgical and surgical therapy, and the change of the clinical parameters during maintenance phase have been rarely presented in Korea. This study was to observe the clinical changes during maintenance phase of 6 months in patients with chronic periodontitis treated by non-surgical or surgical therapy in Department of Periodontics, Chonnam National University Hospital. Among the systemically healthy and non-smoking patients with moderate to severe chronic periodontitis, twenty eight patients (mean age: 47.5 years) treated by non-surgical therapy (scaling and root planning) and nineteen patients (mean age: 47.3 years) treated by surgical therapy (flap surgery) were included in this study. The periodontal supportive therapy including recall check and oral hygiene reinforcement was started as maintenance phase since 1 month of healing after treatment. Probing depth, gingival recession. clinical attachment level and tooth mobility were recorded at initial, baseline and 1, 2, 3 and 6 month of maintenance phase. The clinical parameters were compared between the non-surgical and surgical therapies using Student t-test and repeated measure ANOVA by initial probing depth and surfaces. Surgical therapy resulted in greater change in clinical parameters than non-surgical therapy. During the maintenance phase of 6 months, the clinical effects after treatment had been changed in different pattern according to initial probing depth and tooth surface. During maintenance phase, probing depth increased more and gingival recession increased less after surgical therapy, compared to non-surgical therapy. The sites of initial probing depth less than 3 mm lost more clinical attachment level, and the sites of initial probing depth more than 7 mm gained clinical attachment level during maintenance phase after non-surgical therapy, compared to surgical therapy. Non-surgical therapy resulted in greater reduction of tooth mobility than surgical therapy during maintenance phase. These results indicate that the clinical effects of non-surgical or surgical therapy may be different and may change during the maintenance phase.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.38-47
• /
• 2001

This paper decribes the development of computer-aided design of a very precise progressice die for lead frame of semiconductor chip. The approach to the system is based on knowledgr-based rules. Knowledge of fie이 experts. This system has been written in AutoLISP using AutoCAD ona personal computer and the I-DEAS drafting programming Language on the I-DEAS mater series drafting with on HP9000/715(64) workstation. Data exchange between AutoCAD and I-DEAS master series drafting is accomplished using DXF(drawing exchange format) and IGES(initial graphics exchange specification) files. This system is composed of six main modules, which are input and shape treatment, production feasibility check, strip layout, data conversion, die layout, and post processing modules. Based on Knowledge-based rules, the system considers several factors, such as V-notches, dimple, pad chamfer, spank, cavity punch, camber, coined area, cross bow, material and thickness of product, complexities of blank geometry and punch profiles, specifications of available presses, and the availability of standard parts. As forming processes and the die design system using 2D geometry recognition are integrated with the technology of process planning, die design, and CAE analysis, the standardization of die part for lead frames requiting a high precision process is possible. The die layout drawing generated by the die layout module s displayed in graphic form. The developed system makes it possible to design and manufacture lead frame of a semiconductor more efficiently.