• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.125-128
• /
• 2002

The automotive industry have made an effort to reduce the weight of vehicle structures with increased safety, while initial model of the final product does not contain any prehistoric effects in a design stave. It takes lots of time to calculate forming effects that have great influences on the energy absorption of structures. In this paper, finite element inverse analysis is adopted to calculate forming effects, such as thickness variation and effective plastic strain as well as an initial blank shape with small amount of computation time. Crash analysis can be directly performed after inverse analysis of the forming process without remeshing scheme. The direct mesh mapping method is used to calculate an initial guess from the sliding constraint surface that is extracted from the die and punch set. Analysis results show that energy absorption of structures is increased with consideration of forming effects and finite element inverse analysis is usefully applicable to calculate forming erects of vehicle structures for the crash analysis.

• 한국공작기계학회논문집
• /
• 제13권6호
• /
• pp.87-93
• /
• 2004

An experimental is carried out to investigate the characteristics of blanking for nickel alloy Alloy42 (t=0.203mm), a kind of IC lead frame material. By varying clearance between die and punch the shapes of shear profile are examined. Finite element analysis with element deletion algorithm for ductile fracture mode is also carried out to study the effect of clearance theoretically and to compare with experimental results. The rectangular shape specimen with four different comer radius is used to study the characteristics of blanking for straight side and comer region simultaneously. As the result the ratios measured k(m experiment of roll over, burnish and fracture zone based on initial blank thickness are compared with those of FE analysis. Both experiment and FE analysis show that the amount of mil over and fracture is increased as the clearance increases. When the radius of comer is less than thickness of blank it has been found that larger clearance is required than that of straight region in order to maintain same quality of shear profile at the comer region.

• International Journal of Advanced Culture Technology
• /
• 제10권3호
• /
• pp.174-183
• /
• 2022

The abstract should summarize the contents of the paper and written below the author information. Use the word "Abstract" as the title, in 12-point Times New Roman, boldface type, italicized, centered relative to the column, initially capitalized, fixed-spacing at 13 pt., 12 pt. spacing before the text and 6 pt. after. The abstract content is to be in 11-point, italicized, single spaced type. Leave one blank line after the abstract, and then begin the keywords. All manuscripts must be in English. When it comes to the issue of "virtual and real" in traditional Chinese painting, the first impression is to describe the problems of painting strokes and ink, layout of pictures, etc., but it runs through the initial conception of the work, creation in the middle and aesthetic appreciation of the work. It exists in the whole process of artistic creation and appreciation. In essence, it is a problem of aesthetic thinking and philosophical thinking. Because the traditional Chinese painting theory is influenced by Taoism, when the concept of "virtual and real" is implemented in the specific picture of Chinese painting, it is contained in the specific shape of "physics", that is, the painting theory research of "blank space" in the picture. Based on the traditional Taoist philosophy of China, this paper takes the "virtual and real" view in Lao Zhuang's thought as the research object, deeply analyzes and compares its relationship with the "virtual and real" in Chinese landscape painting, and finds out their artistic spirit, essential characteristics and how to present them. This paper mainly discusses the internal relationship between Taoist philosophy and "virtual and real" in Chinese landscape painting from the following aspects. The introduction expounds the origin, purpose, significance, innovation and research methods of the topic. This paper analyzes the philosophical thoughts about landscape in the philosophical thoughts represented by Lao Tzu and Zhuangzi. The development of Chinese traditional aesthetics theory is closely related to Taoist philosophy, which has laid the foundation and pointed out the direction for the development of Chinese painting theory since ancient times. It also discusses the influence of the Taoist philosophy of "the combination of the virtual and real" on the emergence and development of the artistic conception of landscape painting. Firstly, through the analysis of the artistic conception of landscape painting and its constituent factors, it is pointed out that the artistic conception is affected by the personality and the painting artistic conception. Secondly, through the Taoist thought of "the combination of the virtual and real" in landscape painting, so as to reflect that it is the source of the artistic conception of Chinese landscape painting. It is the unique spiritual concept of "Yin and Yang" and "virtual and real" that creates the unique "blank space" aesthetic realm of Chinese painting in the composition of the picture. Finally, it focuses on the "nothingness" in Taoist philosophy and the "blank space" in Chinese landscape painting. The connotation of the "blank space" in Chinese painting exceeds its own expressive significance, which makes the picture form the aesthetic principle of emotional blending, virtual and real combination and dynamic and static integration. Through the "blank space", it deepens the artistic characteristics of the picture and sublimates the expression of "form" in Chinese painting.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.357-360
• /
• 2007

The profile ring rolling process of Ti-6Al-4V alloy was designed by finite element(FE) simulation and experimental analysis. The design includes geometry design and optimization of process variables. The geometry design such as initial billet and blank sizes, and final rolled ring shape was carried out with the calculation method based on the uniform deformation concept between the wall thickness and ring height. FEM simulation was used to calculate the state variables such as strain, strain rate and temperature and to predict the formation of forming defects during ring rolling process. Finally, the mechanical properties of profiled Ti-6Al-4V alloy ring product were analyzed with the evolution of microstructures during the ring rolling process.

• 소성∙가공
• /
• 제7권4호
• /
• pp.393-399
• /
• 1998

For minimizing wall thickness thinning of circular shells, a new stamping technology, the deep draw-ing process combined with ironing is approached and investigated. The design requirements for the deep drawing shells are to keep the optimum wall thickness with max. 10 percent thickness thinning of the initial blank thickness, to make uniform thickness strain distribution for the wall of circular shell and to improve the shape accuracy for the roundness and concentricity. In order to check the validity and effectiveness of proposed work, a sample process design is applied to a circular shell needed for a 4multi-stepped deep drawing. Through experiments, the variations of the thickness strain distribution in each drawing process are observed. Also a series of experiments are performed to investigate optimum process variables such as the geometry of tooling, radius and drawing rate. In particular, the advantage of current approach with ironing is shown in contrast to the conventional deep drawing process. From the results of proposed method, the optimum value of process variables are obtained, which contribute more uniform thickness strain distribution and better quality in the drawn product.

• 한국정밀공학회지
• /
• 제28권4호
• /
• pp.496-504
• /
• 2011

This paper introduces a CAE-based design procedure in the press forming process for the fabrication of sheet metal parts used in proto-cars. The finite element analysis reveals formability problems during the forming process of a floor member and a front cross member that constitute a rear floor assembly. The study proposes the modification of the initial blank shape or intermediate trimming of the product to prevent failure during forming. It is confirmed by the tryout process as well as the finite element analysis that sound prototype can be obtained with the modified design. The finite element analysis result also provides fairly good prediction of springback amounts used for the post-compensation of the product.

• 소성∙가공
• /
• 제16권4호
• /
• pp.223-228
• /
• 2007

The profile ring rolling process of Ti-6Al-4V alloy was investigated by finite element(FE) simulation and experimental analysis. The process design of the profile ring rolling includes geometry design and optimization of process variables. The geometry design such as initial billet and blank sizes, and final rolled ring shape was carried out with the calculation method based on the uniform deformation concept between the wall thickness and ring height. FEM simulation was used to calculate the state variables such as strain, strain rate and temperature and to predict the formation of forming defects during ring rolling process. Finally, the mechanical properties of profiled Ti-6Al-4V alloy ring product were analyzed with the evolution of microstructures during the ring rolling process.

• 소성∙가공
• /
• 제3권3호
• /
• pp.359-374
• /
• 1994

Process sequence design in sheet metal forming process by the finite element method is investigated. The forming of sheet metal into a washing machine container is used to demonstrate the design of an improved process sequence which has fewer operations. The design procedure makes extensive use of the finite element method which has simulation capabilities of elastic-plastic modeling. A one-stage process to make an initial blank to the final product is simulated to obtain information on metal flow requirements. Loading simulation for a conventional method is also performed to evaluate the design criteria which are uniform thickness distribution around the finished part and maximum punch load within limit of available press capacity. The newly designed sequence has two forming operations and can achieve net-shape manufacturing, while the conventional process sequence has three forming operations. This specific case conventional process sequence has three forming operations. This specific case can be considered for application of the method and for development of the sequence design methodology in general.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.38-47
• /
• 2001

This paper decribes the development of computer-aided design of a very precise progressice die for lead frame of semiconductor chip. The approach to the system is based on knowledgr-based rules. Knowledge of fie이 experts. This system has been written in AutoLISP using AutoCAD ona personal computer and the I-DEAS drafting programming Language on the I-DEAS mater series drafting with on HP9000/715(64) workstation. Data exchange between AutoCAD and I-DEAS master series drafting is accomplished using DXF(drawing exchange format) and IGES(initial graphics exchange specification) files. This system is composed of six main modules, which are input and shape treatment, production feasibility check, strip layout, data conversion, die layout, and post processing modules. Based on Knowledge-based rules, the system considers several factors, such as V-notches, dimple, pad chamfer, spank, cavity punch, camber, coined area, cross bow, material and thickness of product, complexities of blank geometry and punch profiles, specifications of available presses, and the availability of standard parts. As forming processes and the die design system using 2D geometry recognition are integrated with the technology of process planning, die design, and CAE analysis, the standardization of die part for lead frames requiting a high precision process is possible. The die layout drawing generated by the die layout module s displayed in graphic form. The developed system makes it possible to design and manufacture lead frame of a semiconductor more efficiently.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.373-376
• /
• 2006

The ring rolling design for a large-scale Ti-6Al-4V alloy ring was performed with a calculation method and FEM simulation. The ring rolling design includes geometry design and optimization of process variables. The calculation method was to determine geometry design such as initial billet and blank size, and final rolled ring shape. A commercial FEM code, SHAPE was used to simulate the effect of process variables in ring rolling on the distribution of the internal state variables such as strain, strain rate and temperature. In order to predict the forming defects during ring rolling, the process-map approach based on Ziegler's instability criterion was used with FEM simulation. Finally, an optimum process design to obtain sound Ti-6Al-4V rings without forming defects was suggested through combined approach of Ziegler's instability map and FEM simulation results.