• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.80-83
• /
• 1999

We have studied properties(crystal structure, density, absorption, contraction, initial permeability, and permeability) of Ni$_{0.175-x}$Cu$_{x}$Zn$_{0.33}$Fe$_{0.495}$ (x=0~0.175) ferrites with various NiO and CuO, because of development of materials for high frequency inductor. The XRD peaks of all of samples were observed only spine이 phase. As a results of the density, absorption rate, and shrinkage rate, the grain growth progressed rapidly in x=0.1 at 95$0^{\circ}C$, x=0.075 at 105$0^{\circ}C$, and x=0.025 at 115$0^{\circ}C$ for 3 hours. Initial permeability increased with increasing CuO concentration until x=0.1, and then decreased. The complex permeability as a function frequency were high values at sintered 105$0^{\circ}C$ fotr3 hours in x=0.075, 0.1., 0.1.1.

• 한국세라믹학회지
• /
• 제35권8호
• /
• pp.836-842
• /
• 1998

In this experiment well-know additives for Mn-Zn ferrites CaO and {{{{ { SiO}_{2 } }} were added at various content and their effects on microstructures and magnetic properties with sintering atmosphere were examined. By adding up to 0.04wt% {{{{ { SiO}_{2 } }} and and 0.06wt% CaO the sintered density was increased and then decreased gra-dually. Higher sintered density and initial permeability were observed by adding both CaO and {{{{ { SiO}_{2 } }} than by adding CaO or {{{{ { SiO}_{2 } }} alone. Without any additives initial permeability and tan$\delta$/${\mu}$ decreased at 1000kHz as oxidation degree(${\gamma}$) increased.

• Membrane and Water Treatment
• /
• 제1권1호
• /
• pp.39-47
• /
• 2010

Using a conventional two-compartment cell with stirrers the separation of an aqueous solution of HCl-$NiCl_2$ by an anion-exchange membrane Neosepta-AFN was investigated. The dialysis process was characterized by the permeability coefficient of the membrane towards to $Cl^-$ ions. This quantity was determined by the numerical integration of equations, which describe the time dependence of the total concentration of $Cl^-$ ions in compartment initially filled with stripping agent (water), combined with an optimizing procedure. The analysis of the experimental results showed that this permeability coefficient is a satisfactory characteristic for the process studied. It can be graphically correlated with the initial acid and initial salt concentrations in the compartment initially filled with acid+salt mixture.

• 한국세라믹학회지
• /
• 제30권10호
• /
• pp.791-796
• /
• 1993

The electro-magnetic properties of the Mn-Zn ferrite single crystal with small variation of Fe2O3 concentration at the high permeability composition, 53mol% Fe2O3-28.5mol% MnO-18.5mol% ZnO, have been studied for the VCR magnetic head application. With the increase of the Fe2O3 concentration, the Fe2+ concentration increased, the specific resistivity decreased, the secondary maximum permeability shifted to the lower temperature, and the initial permeability decreased. It was concluded that the small variation of $\pm$0.5mol% Fe2O3 concentration greatly affected the electro-magnetic properties of Mn-Zn ferrite single crystals. At the composition of 53mol% Fe2O3, the initial permeability was comparatively high (650 at 5MHz) and its temperature dependence was small.

• 한국전기전자재료학회논문지
• /
• 제15권2호
• /
• pp.178-183
• /
• 2002

The effects of Dy$_2$O$_3$and Er$_2$O$_3$addition on the electromagnetic properties of Mn-Zn ferrite were investigated in the doping concentration range from 0.05 wt% to 0.25 wt%. All samples were prepared by standard fabrication of ferrite ceramics. The XRD patterns of sample were observed spinel and secondary phase. The densities of sample were showed nearly constant values. As the increased additive, electrical resistivity, initial permeability and real component of the series complex permeability increased with setting limits each other. Excess doped with Dy$_2$O$_3$ and Er$_2$O$_3$, those values decreased. The maximum electrical resistivity was observed with 0.15 we% and initial permeability was observed with 0.05 wt%. Magnetic loss decreased with additive and then increased in proportion to increased.

• Journal of Magnetics
• /
• 제1권1호
• /
• pp.37-41
• /
• 1996

The frequency dependence of complex permeability for various NiCuZn ferrites was investigated. The variation of complex permeability for NiCuZn ferrites can be presented as a form of a semi-circle, so called the Cole-Cole plot, and the relaxation phenomena were explained with various shapes of the plots. The relaxation time $\Upsilon$ was calculated from $f_rx$, which is a relaxation frequency at ${\mu"}_{max}$. Relations between anisotropy field $H_A$ and relaxation time $\Upsilon$, initial permeability $\mu_i$ and $H_A$ were plotted to identify the frequency dependence of complex permeability.lity.

• 터널과지하공간
• /
• 제34권1호
• /
• pp.71-87
• /
• 2024

고준위방사성폐기물 심층처분 시, 처분공 주변의 근계암반은 높은 지중응력과 재포화된 벤토나이트 완충재의 팽윤압, 방사성 원소 붕괴열의 영향을 받아 국부적으로 투수계수가 변화될 수 있다. 본 연구에서는 국내 유력한 처분 대상 부지 암종 중의 하나인 결정질 경암으로서의 화강암을 대상으로, 실제 처분 환경에서 예상되는 다양한 구속압과 온도 조건을 적용하여 투수계수 변화 특성을 실험적인 방법을 통하여 고찰하고자 하였다. KURT 화강암 시험편 하나당 3개 이상의 정수압 조건에서 투수시험을 수행하여 구속압이 증가함에 따라 투수계수가 지수적으로 감소하는 관계를 도출하였다. 예상 최대 온도로 설정한 90℃ 이하 수준에서는 온도에 의한 투수계수 변화가 무시 가능할 정도로 작음을 확인하였다. 추가로 초기투수계수가 초기공극률의 거듭제곱에 비례하는 상관관계를 도출함으로써, 특정 공극률을 지닌 화강암이 일정 구속압 하에 있을 때 가지는 투수계수 값을 유추할 수 있었다.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.26-31
• /
• 1997

Abstract A series of permeability tests was performed on the mixtures with specific mixing rates of sand and bentonite using modified rigid-wall permeameter. Sand-bentonite mixtures were permeated by organics, ethanol and TCE. Permeability of bentonite with several mixing rates had a tendency to decrease up to initial one pore volume and permeability was thereafter converged to a constant value. When sand-bentonite mixtures was permeated by water, permeability was decreased at the beginning but it was thereafter converged to a constant. Among several mixing rates, permeability was greatly decreased at 15% of mixing rate. When sand-bentonite mixtures with 15% mixing rate was permeated by ethanol, permeability was about 10 times larger value than permeability of water. Peameability was shown greater values when permeated by TCE (TrichloroEthylene) followed by ethanol. Suitable mixing rate of sand-bentonite for a liner of waste landfills was detected.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.538-548
• /
• 2003

We studied effects by Re$_2$O$_3$(R=Dy, Gd, Ho) addition on the properties of Mn-Zn ferrite. The doping concentration range from 0.05 wt% to 0.25 wt%. All samples were prepared by standard fabrication of ceramics. With increasing the rare earth oxides, specific density and initial permeability increased on the whole. But, the tendencies such as upper result had the measured value on limitation and characteristics saturated or decreased properties after that. In case of excessive addition of additive beyond some level, initial permeability properties of ferrite have gone down in spite of anomalous grain. With increasing the content of additive, both the real and imaginary component of complex permeability and the magnetic loss (tan$\delta$) increased. Because the increased rate of real component had higher than imaginary component, magnetic loss increased none the less for increasing the real component related with magnetic permeability. But, the magnetic loss of ferrite doped with the rare earth oxides was lower than that of Mn-Zn ferrite at any rate. The small amount of present rare earth oxides in Mn-Zn ferrite composition led to enhancement of resistivity in bulk, and more so in the grain boundary. It was seem to be due to the formation of mutual reaction such as between iron ions and rare earth element ions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.373-381
• /
• 2005

The permeability of contaminated soil and elapsed time are important considering factors to in-situ soil remadiation. Gabr et. al. (1996) derived the solution equation of contaminant concentration ratio as initial one (C/$C_0$) with time and spatial changes in contaminated area which embedded with vertical drains. The contaminant concentration ratio (C/$C_0$) is analyzed with time and spatial changes in three different permeability areas which are $k=l.0{\times}10^{-5,}$ $l.0{\times}l0^{-6,}$ $l.0{\times}l0^{-7}\;_{m/s}$ by using the Gabr's equation. Results from numerical analysis indicate that the ratio (C/$C_0$) decreases as the elapsed time increases in every point, however, remediation efficiency decreases as the analyzing point is far from injection well to extraction one and is deeper from top level of contaminated area. And also it decreases as the permeability of contaminated area decreases. Especially, the lower permeability of contaminated area effects directly on the soil remediation, in this research, under condition which the permeability of contaminated area is $l.0{\times}l0^{-7}\;_{m/s}$, the maximum time needed to attain 90% clean up level ($t_{90}$) is 65,690 hours(7.5 years), it takes so much time to clean the low permeability contaminated soil.