• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.3
• /
• pp.255-260
• /
• 2002

This paper describes a fuzzy-based system for analyzing the stress intensity factors (SIFs) of three-dimensional (3D) cracks. A geometry model, i.e. a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model by using the fuzzy knowledge processing. Nodes are generated by the bucketing method, and ten-coded quadratic tetrahedral solid elements are generated by the Delaunay triangulation techniques. The singular elements such that the mid-point nodes near crack front are shifted at the quarter-points, and these are automatically placed along the 3D crack front. The complete finite element(FE) model is generated, and a stress analysis is performed. The SIFs are calculated using the displacement extrapolation method. To demonstrate practical performances of the present system, semi-elliptical surface cracks in a inhomogeneous plate subjected to uniform tension are solved.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.149.1-149.1
• /
• 2013

Noble metal silicides are widely used in silicon based microelectronic and optoelectronic devices. Among them, as compared to other silicides, structural and electronic properties of platinum silicide (PtSi) are found to be less sensitive to change in its dimensions. PtSi is known to overcome the junction spiking problems of Al-Si contacts. Present study is regarding the spatial evolution of platinum silicide in Pt/SiOx/Si. Scanning photoelectron emission microscopy (SPEM) was used for this purpose. SPEM images were obtained for pristine samples and after an annealing at $500^{\circ}C$ for 1 hr. Core-level spectra were recorded at different points in SPEM images contrasted by the intensity of Pt 4f7/2. Both Pt 4f and Si 2p spectra reveal the formation of PtSi after annealing. However, in contrast to earlier reports, PtSi formation is found to be non-uniform confirmed by the SPEM images and from the core level spectra taken at different intensity points.

• Investigative Magnetic Resonance Imaging
• /
• v.15 no.2
• /
• pp.170-175
• /
• 2011

Ancient schwannoma is a rare variant of schwannoma and a slow growing benign tumor associated with degeneration that may be diagnosed as a malignant tumor, because it presents with a large size and an inhomogeneous signal intensity. The main differential diagnosis of plexiform soft tissue tumor includes plexiform neurofibroma, malignant peripheral nerve sheath tumor (MPNST). In this case, we describe the MRI findings in a case of ancient schwannoma involving left thigh of a 63-year-old woman mimicking a plexiform MPNST. The tumor appeared as an inhomogeneous signal intensity and multinodular appearance, causing misdiagnosis as a plexiform MPNST.

• Coupled systems mechanics
• /
• v.5 no.4
• /
• pp.315-327
• /
• 2016

Undergoing large volumetric changes upon incremental environmental stimulation, hydrogels are interesting materials which hold immense potentials for utilization in a wide array of applications in diverse industries. Owing to the large magnitudes of deformation it undergoes, swelling induced instability is a commonly observed sight in all types of gels. In this work, we investigate the instability of photo-thermal sensitive hydrogels, produced by impregnating light absorbing nano-particles into the polymer network of a temperature sensitive hydrogel, such as PNIPAM. Earlier works have shown that by using lights of different intensities, these hydrogels follow different swelling trends. We investigate the possibility of utilizing this fact for remote switching applications. The analysis is built on a thermodynamic framework of inhomogeneous large deformation of hydrogels and implemented via commercial finite element software, ABAQUS. Various examples of swelling induced instabilities, and its corresponding dependence on light intensity, will be investigated. We show that the instabilities that arise have their morphologies dependent on the light intensity.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.861-869
• /
• 2018

To determine the origin of the inhomogeneous microstructure and texture observed in drawn and annealed high purity copper wires, two kinds of drawing process conditions and their influence was investigated. The regular condition, based on a symmetric die, and a condition designed intentionally to produce an inhomogeneous shear deformation using an asymmetric die were employed. The difference in intensity of <111>-<100> distributed texture between the two wires confirmed that the wire drawn under the asymmetric die condition experienced a higher amount of shear deformation. The extensive shear strain in the wire drawn under the asymmetric die condition gave rise to inhomogeneous primary and secondary recrystallization behavior. After annealing at $200^{\circ}C$, grains with <100> texture, which were larger than the surrounding recrystallized grains, were extensively present on one half circle of the wire drawn under the asymmetric die condition, while larger grains with <100> were sparsely observed around the middle region of the wire drawn under the regular condition. Interestingly, the area where the larger grains with <100> texture existed was identical to the area where the high shear strain occurred during drawing in both wires. During annealing at $400^{\circ}C$, grains with <112> texture started to grow abnormally at the center of both wires as a result of secondary recrystallization. After annealing at $900^{\circ}C$ grains with <112> due to secondary recrystallization occupied the entire region of the wire drawn under the regular condition. On the other hand, in the wire drawn under the asymmetric die condition and then annealed at $900^{\circ}C$, the <100> oriented grains as a result of the normal grain growth of the larger <100> grains which were observed after annealing at $200^{\circ}C$, coexisted with the abnormally grown <112> grains. These results indicate that dynamic recrystallization induced by the shear strain during drawing plays an important role in the inhomogeneity of the microstructure and texture of wires after annealing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.839-842
• /
• 2004

We present a fast-switching electro-optical device based on flexoelectro-optic effect in short pitch cholesterics oriented in uniform lying helix texture. The device has two operating modes: amplitude and phase modulation mode. The amplitude modulation mode is a fast in-plane switching of the device optic axis that enables to achieve a high percent of modulation of the transmitted light intensity whereas the phase mode gives a continuous change of the refractive index and thus of the phase shift of the transmitted light. By using a small concentration of diacrylate monomer and selecting the illumination conditions we have been able to create a inhomogeneous polymeric network mostly localized at both substrate surfaces and stabilize the two switching modes.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.353-356
• /
• 2002

Planar laser induced fluorescence(PLIF) has been widely used to obtain two dimensional fuel distribution. Preliminary investigation was performed to measure quantitative air excess ratio distribution in an engine fueled with LPG. It is known that fluorescence signal from acetone as a fluorescent tracer is less sensitive to oxygen quenching than other dopants. Acetone was excited by KrF excimer laser (248nm) and its fluorescence image was acquired by ICCD camera with a cut-of filter to suppress Mie scattering from the laser light. For the purpose of quantifying PLIF signal, an image processing method including the correction of laser sheet beam profile was suggested. Raw images were divided by each intensity of laser energy and profile of laser sheet beam. Inhomogeneous fluorescence images scaled with the reference data, which was taken by a calibration process, were converted to air excess ratio distribution. This investigation showed instantaneous quantitative measurement of planar air excess ratio distribution for gaseous fuel.

• Journal of Yeungnam Medical Science
• /
• v.15 no.2
• /
• pp.306-315
• /
• 1998

MR findings in nine patients(three female, six male) with neuro-Behcet's disease were retrospectively analyzed. NeuroBehcet's disease was diagnosed on the basis of typical clinical symptoms. Involved site, pattern, signal intensity, and contrast enhancement pattern on MRI were evaluated. In addition, follow up MR imaging was performed in four patients. The midbrain(7/9), internal capsule(7/9), pons(6/9), thalamus(6/9), basal ganglia (5/9), middle cerebella peduncle(4/9), medulla oblongata(2/9), and subcortical white matter(2/9) are involved on MRI. The size of lesions was 1cm to 3cm and their margin was ill-defined and patchy. Inhomogeneous high signal intensity on the T2-weighted images and low signal intensity on T1-weighted images was seen respectively. In four of nine cases, there was focal enhancement. On follow up MR imaging, improvement or recurrance of the lesions was found. Also in two cases of follow up cases, there was artophy in brainstem and(or) middle cerebellar peduncles. In conclusion, MR imaging with systemic clinical symptoms is useful for diagnosing neuro-Behcet's disease.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.84-92
• /
• 2011

The automated segmentation technique of cell region in Bio Images helps biologists understand complex functions of cells. It is mightly important in that it can process the analysis of cells automatically which has been done manually before. The conventional methods for segmentation of cell and nuclei from multi-channel images consist of two steps. In the first step nuclei are extracted from DNA channel, and used as initial contour for the second step. In the second step cytoplasm are segmented from Actin channel by using Active Contour model based on intensity. However, conventional studies have some limitation that they let the cell segmentation performance fall by not considering inhomogeneous intensity problem in cell images. Therefore, the paper consider correlation between DNA and Actin channel, and then proposes the preprocessing algorithm by which the brightness of cell inside in Actin channel can be compensated homogeneously by using DNA channel information. Experiment result show that the proposed preprocessing method improves the cell segmentation performance compared to the conventional method.

• Imaging Science in Dentistry
• /
• v.33 no.4
• /
• pp.239-244
• /
• 2003

Malignant fibrous histiocytoma (MFH) is a pleomorphic soft tissue sarcoma. Three cases of MFH were reported in our study. The first case involved in the right infratemporal fossa of a 32-year-old female was presented. MR imaging revealed a 5.0 × 3.3 cm soft tissue mass of inhomogeneous high signal intensity. The second case was found in the right hard palate of a 66-year-old male. CT demonstrated bone destruction and MR imaging showed a 4 × 4 cm sized soft tissue mass of heterogeneous high signal intensity. The final case was found in the left masticator space of a 37-year-old male. The CT image showed a large mass with massive bone destruction of the left mandibular ramus, while the MRI displayed a soft tissue mass, 8 cm diameter. Our cases exhibited the general features of MFH. MRI is essential in the imaging of MFH, namely to depict tumor borders and demonstrate relationships with adjacent structures.