• 한국물환경학회지
• /
• 제21권5호
• /
• pp.496-499
• /
• 2005

Power Plant is requested, by environmental bodies and fisherman, to correct the pollution of coastal area due to the outflow of foam from the outlet of the power plants. Foam wastewater cause a lot of environmental problems, expecially in aesthetic points of view. Therefore, It is needed to be collect from the stream into nearby ocean, and the collected foams should be treated before being discharged into nearby ocean. The most effective and feasible treatment method researched for the effective treatment of foam wastewater generated at the power plants. The result of the test is confirmed with collecting Foam wastewater by inhalation force. The treatment pilot ($3m^3/hr$) collected wastewater was operated by Biological degradation method(Aerobic/anaerobic Processes) for approximately two months. It was removed SS, COD, nutrient(T-P, T-N), etc. The System is expected successfully by Minimizing the operating costs such as electricity, repair expenses, chemicals and supplies expenses.

• 한국운동역학회지
• /
• 제21권3호
• /
• pp.327-334
• /
• 2011

The objective of this study was to develop a scientific approach for investigating Korean dance in detail, and to examine the intense expressions and various movements, which are based on Danjeon breathing. For the purpose, we analyzed the movement changes and distribution of forces resulting from the switch in movement between exhalation and inhalation while bending, which is the most basic movement in Korean dance. The following conclusions were drawn from this study. In Korean dance, bending with breathing involves less back-and-forth-movement and more up-and-down movement, as compared to bending without breathing; this indicates greater body stability and a wider range of movements while bending with breathing. In addition, less time is required for bending with breathing at the point of switching from exhalation to inhalation, and it involves less movement of the supporting leg; thus, vending with breathing involves faster switching from bending movements to extending movements. While bending, the raised leg goes through a less smooth curve while breathing, which indicates stronger movement of the toes. Bending with breathing requires a greater braking force than bending without breathing, and the vertical force, generated by switching from exhalation to inhalation, is transferred to extending movements using the ground load. The results of this study can be potentially employed to investigate the expressions used in Korean dance on th basis of its principle of forces. Korean dance has evolved into various creative forms, and basic analytical studies of these diverse forms and related breathing methods re required in the future.

• 대한수의사회지
• /
• 제16권8_10호
• /
• pp.293-295
• /
• 1980

Hepatic and renal funtions were observed in normal shephered dogs anesthetized with methoxyflurane for two hours by inhalation techniques used in veterinary practice. Serum glutamicpyruvic transaminase (SGPT) and alkaline phosphotase (ALP) activities were

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2327-2332
• /
• 2007

This study investigates on the inhalation force improvements of hood consisted one of the local ventilation systems attached the new device named as gas-guidance-device for removed a pollution source. The numerical method applying finite element method is calculated the velocity and pressure distributions of a moving fluid at the beginning and the inside of a hood with and without the gas-guidance-device in hood. And, the experimental study is measured the wind velocity using the anemometer at the same condition of numerical study. Also, the optimum shape of gas-guidance-device which is suitable for hood shape derived from the numerical and experimental results. The results of this study is supplied the important data to an industrial field for control of a pollution source in the engineering aspect. Moreover, the introduced technique of hood attached the gas-guidance-device is very useful to remove the harmful materials such as dust and waste happened in the manufacturing factory.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.609-613
• /
• 2008

The fire whirl occurring by the instability of atmosphere is a rare phenomenon, but highly destructive because it has high inhalation and lift force, caused by the rotating velocity. And it is difficult to extinguish the fire, because of increment of the spread rate with the flame height. In this study, for investigation of the flow characteristic of fire whirl for various heat release rate, numerical analysis is performed in same conditions with experiments, using the FDS which is developed at NIST. For validating of the numerical study, the results are compared with the experiment. The result shows that the relation between the characteristic length and the ratio of circulation versus the buoyancy force is $z_f$/D$^{\ast}$ = 0.304(${\Omega}/{\alpha}$)^2 - 1.334${\Omega}/{\alpha}$ + 5.516.

• 한국안전학회지
• /
• 제24권4호
• /
• pp.17-21
• /
• 2009

The fire whirl occurring in the urban and/or wildland fire is generated by the instabilities of atmosphere. The fire whirl is a rare phenomenon, but highly destructive because it has high inhalation and lift force. In this study, experimental study is performed with oriental oak leaves, for investigating of the fire whirl characteristics occurred in wildland fire. As a result of experiment, the circulation intensity increases as increasing of the induced air velocity, and then the fire whirl occurs. Also, the heat release rate and flame height increase 22% and 18% in highest circulation.

• 한국운동역학회지
• /
• 제25권2호
• /
• pp.199-206
• /
• 2015

Objective : The purpose of this study was to conduct a biomechanical analysis of a one-legged jump in a traditional Korean dance (Wae Bal Ddwigi) according to breathing method. Method : Participants for this study were 10 dancers with experience for at least 10 years in traditional Korean dance. Independent variables for this test were two different types of breathing methods. Dependent variables were ground reaction force and lower extremity kinematic variables. The jumping movement was divided into three separate stages, take off, flight, and landing. The subjects were asked a questionnaire regarding the degree of impact force and stability of landing posture after the experiment. The Kistler Force Plate (9281B, Switzerland) was used to measure ground reaction force. A digital camera was used to look into angles of each joint of the lower part of body. SPSS was used for statistical analysis via the dependent t-test(p<.05). Results : There were significant differences in jumping according to breathing method. The inhalation & exhalation method yielded significantly longer flight times combined with greater ground reaction force. The breath-holding method required more core flexion during landing, increasing movement at the hips and shoulders. Conclusion : Consequently, there was more flexion at the knee to compensate for this movement. As a result, landing time was significantly higher for breath-holding.

• 한국가시화정보학회지
• /
• 제4권2호
• /
• pp.81-87
• /
• 2006

In this paper, we present flow patterns around and performance of an air-flow separator by using the numerical analysis. With this separator, particles of different density are to be separated by using the drag force from the air flow. The low-density particles are designed to be separated by using inhalation through holes on a rotating drum. To obtain the flow informations needed for determining the proper design parameters, we have performed numerical simulations by using a commercial code, ANSYS CFX. Various parameter set was tested and it was found that depending on the design of drums there exist critical parameter set regarding the attachment of light particles on the drum, which is prerequisite for the separation of materials. We present here the possibility of using the present design in separation of particles mixed in the clod for use in recycling.

• 한국화재소방학회논문지
• /
• 제23권3호
• /
• pp.73-78
• /
• 2009

Fire whirl은 도시 및 산림화재와 같이 광범위한 지형에서 주로 발생하며, 화염주위 환경의 불안전성에 의해 발생하는 현상이다. Fire whirl은 드물게 발생하지만, 높은 흡입력과 양력을 가지게 되어 연소속도를 증가시키는 매우 위험한 현상이다. 본 연구에서는 산림화재에서 발생하는 fire whirl 특성에 대한 고찰을 위해 굴참나무 낙엽을 이용한 fire whirl 실험 및 수치해석 연구를 실시하였다. 실험 결과 유입공기의 속도가 증가함에 따라 화원주위의 회전강도가 증가하여 발열량 및 화염길이가 일반 풀화재에 비해 최대 22.8%, 18.4% 증가하였으며, 수치해석은 실험결과와 유사한 경향을 나타내었다.

• 대한치과교정학회지
• /
• 제29권5호
• /
• pp.551-562
• /
• 1999

본 연구는 치아를 실험적으로 이동시킬 때, 교정력의 크기와 적용방법에 따른 치아이동 양상의 차이가 존재하는 지의 여부와 치근흡수와의 관련 여부에 대하여 평가하고자 하였다. 300g전후의 건강한 수컷 흰쥐 24마리를 세 군으로 나누고 상악 제 1대구치와 상악중절치 사이에 NiTi closed coil spring을 장착하여, 각 군당 50g(A군), 100g(B군), 25g(C군)을 적용하였고 C군의 경우에는 교정력을 적용한지 4일째 50g으로 힘을 증가하였다. 15일간 교정력을 적용하는 동안 매일 ehter로 흡입 마취를 시행하고 치아이동거리를 digital caliper로 측정하고 15일간의 실험기간 종료 후 상악 제1대구치 치근부의 조직표본을 제작하여 광학 현미경으로 관찰한 바 다음과 같은 결과를 얻었다. 1. 각 군별 15일간 총 치아이동거리는 B군에서 가장 컸고, 그 다음 C군, A군의 순이었으나 통계학적으로 유의성있는 차이는 없었다. 2. A, B, C군 모두 전형적인 치아의 이동양상을 보여주었으며 치아이동 지체기가 끝난 날은 C, B, A군의 순서로 각각 7, 8, 9일째 끝났으나 통계학적으로 유의성있는 차이는 없었다. 3. A, B, C군 모두에서 치근의 흡수양상을 관찰할 수 있었고, 특히 B군에서 가장 심한 치근흡수양상을 보여주었고, C군에서 치근흡수의 양상이 가장 적었다. 이상을 종합해볼 때, 교정력이 크다고 하여 더 빠른 치아이동이 일어난다고 볼 수 없으며 교정력이 클수록 초자양변성대가 광범위하게 형성되어 오히려 치근의 흡수도 증가하므로 교정력을 적용할 때 초기 교정력을 보다 적게 적용하여 초자양변성대 형성범위를 줄인 뒤 교정력을 증가시키는 방법이 치근흡수를 최소화하면서 효과적인 치아이동을 얻을 수 있을 것으로 생각된다.