• Journal of the Korea Institute of Building Construction
• /
• v.13 no.5
• /
• pp.482-490
• /
• 2013

Although the flat plate system is an efficient structural type due to the simplicity of its construction, the low story height, and the various plan design, the slab-column connections are vulnerable to punching shear failure from gravity load and eccentric shear failure from lateral load. To prevent the structure collapse, various construction methods of slab-column connection reinforcement are developed but none of these satisfies all of structural performance, economics, and constructability. This paper presents the reinforcement of slab-column connection with lattice bars. The structural performance is confirmed with the interior slab-column connection tests subjected to cyclic loading, and the economic feasibility is demonstrated from the structural design under the same condition with lattice bars, stud rails, and stirrups.

• Korean Institute of Interior Design Journal
• /
• v.22 no.2
• /
• pp.220-229
• /
• 2013

Recently, the volume of knowledge information in the form of electronic media is quickly increasing in the library field along with the advancement of electronic communication technology. Libraries have both printed data and electronic data and are faced with the issue of corresponding with the access and use of knowledge information in terms of the space. This study is for building the layout of a sustainable knowledge information space based on the view that the library is the official infrastructure of the knowledge information based society. It is intended to analyze the meaning of knowledge information in the modern society, characteristics in the spatial organization and the transmission of knowledge information. The goal of this study is to understand and forecast the spatial structure where users access knowledge information and exchange with one another and developing the direction and guidelines for the spatial plan that today's libraries prefer through this analysis. For this, this study firstly prepared the base for the research on library space which can be considered as the physical realization of such concepts, through the theoretical review about the knowledge information and social concepts as well as characteristics of modern society. Also, it seized the characteristics in the transmission of knowledge information by conducting a structural analysis of the information service such as knowledge information and space, space and information media, space and space through the cases of 10 public libraries. The analysis resulted in basic data including the system of organizing knowledge information, system of knowledge information transferring elements and structure, and layout pattern of each library. These results are deemed meaningful for the promotion of communication with the user through the exchange, creation, and experience of knowledge information, the social role of today's public library.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.67-72
• /
• 2020

Satellite communication is not used by many people like mobile communication, but it is a necessary technology for public service and communication services, such as providing the Internet in military, disaster, remote education and medical services, island areas, and infrastructure vulnerable areas. However, on ships and aircraft, mobile communications requiring base stations are either unavailable or restricted in their use. In this paper, we used a Raspberry Pi board as the terminal device to communicate network through satellite modem and PPP protocol, and implemented two-way data link using the text message of the modem to connect to the Thuraya geo-stationary orbit network. In addition, I/O devices were connected to the controller of the terminal equipment to design and implement an IoT device system for ships that can remotely access the system under control and control I/Os and transmit measured data through various sensors.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.709-714
• /
• 2009

Recently, biological researches are required to deal with a large scale of data. While scientists used classical experimental approaches for researches in the past, it is possible to get more sophisticated observations easily with convergence of information technologies and biology. The study on diseases is one of the most important issues of the life science. Conventional services and databases provide users with information such as classification of diseases, symptoms, and medical treatments through web. However, it is hard to connect or develop them for other new services because they have independent and different criterions. It may be a factor that interferes the development of biology. In this paper, we propose an integrated data structure for the disease database, and design and implement a novel directory system for diseases as an infrastructure for developing other new services.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.255-266
• /
• 2011

In order to evaluate the environmental load occurring from the whole life cycle of a facility, LCA (Life Cycle Assessment) adopted by ISO is not only applied as an individual product but rather a complicated system involving buildings and/or infrastructure in a wide range of scope. The introducing of LCA to a wastewater reuse facility will assist to understand not only the treatment of water contaminants but also the overall system related to the interaction of involved, potential issues. This research implemented LCA for the establishment of the wastewater reuse facility. The results show that a fresh water aquatic Eco-toxicological Impact (88.3%) is the largest environment concern and the maintenance & operation phase has the most impact on the environment utilizing life cycle for the wastewater reuse facility. The civil works and chemical treatments in the maintenance & operation phase led to the biggest environmental impact. The results of this research can provide pertinent data of investigating opportunities for environmental improvement not limited to public officers regulating environmental policies, and could be used to make decisions for an environmentally sound and sustainable design in the initial phase of construction.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.3
• /
• pp.231-238
• /
• 2021

In addition to individual calls and group calls, the Trunked Radio System (TRS), which belongs to a group, can make calls simultaneously, and many users can use it within a limited time by adjusting the call time. Also, the LCX infrastructure network of the subway Most of the FM, firefighting radio, TRS of the National Police Agency and the terrestrial DMB service built in 2005 are commonly connected to the network for service and operation. In connection with the analysis, call reception sensitivity, handoff, interference with other signals, time delay, etc. were analyzed, and tests such as reception field strength for each output of the repeater and the success rate of the call terminal were conducted and the test results were analyzed. In addition, it will help TRS cell design and network construction by predicting equipment output capacity and service coverage based on test results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1249-1254
• /
• 2021

Computing technology and networking technology in the era of the 4th industrial revolution are rapidly evolving into an intelligent information society. AR, VR, and MR technologies, which are dual immersive media fields, are being applied in many convergence technologies, especially! The development of the health and healthcare field is actively progressing. In the field of health and healthcare, there are many problems due to aging of the population, increase in chronic progress, lack of infrastructure, and lack of professional manpower. services in the field are adopted. Therefore, this study applies cognitive evaluation through a computing system to the mild cognitive impairment, designs and develops a cognitive judgment platform using augmented reality based on the cognitive judgment technology system design, and integrates AI and BigData-based intelligent cognitive rehabilitation in the future. It is used as basic data for service platform development.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.214-215
• /
• 2013

Current competition among companies than regional, the time constraints, it is globalization, Tilt the efforts of many to be operated by building the efficient distribution system to reduce logistics costs and improve customer service it is reality's there. Therefore, the need for industrial complexes environmentally friendly can be cost competitive companies perform cavitation region's increased. To build the distribution center these logistics system through a joint of freight and appropriate policy is required. In particular, efficient operation through the system construction of industrial complexes in the logistics system is very important in terms of friendly low-cost urban logistics, the environment. Since the traffic volume which is Jipufa and utilization of network is transported by a more appropriate technicians and means suitable operating model can efficiency is improved. However, despite these advantages, research network design has not been actively conducted due to the complexity of the problem. Therefore, in this study, by analyzing the logistics system, and presents the operating model through a simulation and basic settings for the model of the logistics complex based on the analysis result, the construction of infrastructure of logistics industry complex it is intended to present the article.

• Journal of the Society of Disaster Information
• /
• v.17 no.4
• /
• pp.684-693
• /
• 2021

Purpose: The purpose is to establish a safe facility environment from abnormal voltages such as lightning by developing a smart land resistance measuring device that can acquire real-time land resistance data using Arduino. Method: This paper studied design models and application cases by developing a land resistance acquisition and analysis system with Arduino and a power line communication (PLC) system. Some sites in the wind power generation complex in Gyeongsangnam-do were selected as test beds, and real-time land resistance data applied with new technologies were obtained. The electrode arrangement adopted a smart electrode arrangement using a combination of a Wenner four electrode arrangement and a Schlumberger electrode arrangement. Result: First, the characteristic of this technology is that the depth of smart multi-electrodes is organized differently to reduce the error range of the acquired data even in the stratigraphic structure with specificity between floors. Second, IT convergence technology was applied to enable real-time transmission and reception of information on land resistance data acquired from smart ground electrodes through the Internet of Things. Finally, it is possible to establish a regular management system and analyze big data accumulated in the server to check the trend of changes in various elements, and to model the optimal ground algorithm and ground system design for the IT convergence environment. Conclusion: This technology will reduce surge damage caused by lightning on urban infrastructure underlying the 4th industrial era and design an optimized ground system model to protect the safety and life of users. It is also expected to secure intellectual property rights of pure domestic technology to create jobs and revitalize our industry, which has been stagnant as a pandemic in the post-COVID-19 era.

• Journal of Digital Contents Society
• /
• v.9 no.2
• /
• pp.341-348
• /
• 2008

As a high-speed growth of internet infrastructure and a fast supply of digital imaging devices, a digital image contents industrialization is growing fast. Digital image contents are represented as digitalized images for recognition by the computer. This paper proposes the customized stock image contents management system for digital image contents developers and UCC contents producers. For automatic batch management of image contents, we design the system using the techniques of stock image meta-data conversion to want, image contents format conversion to want and selective image contents uploading to want. Furthermore, constructed system can be embedded to a system easy and fast. It provides efficient work environment as appling conventional systems and contributes for user-friendly interface construction.