• 제목/요약/키워드: Infrared images

Search Result 684, Processing Time 0.902 seconds

GROUND-BASED NEAR-INFRARED CENSUS FOR YOUNG STAR CLUSTERS IN THE DWARF STARBURST GALAXY NGC 1569

  • Kyeong, Jae-Mann;Sung, Eon-Chang;Kim, Sang-Chul;Chaboyer, Brian
    • Journal of The Korean Astronomical Society
    • /
    • v.43 no.1
    • /
    • pp.1-8
    • /
    • 2010
  • JHK near-infrared photometry of star clusters in the dwarf irregular/dwarf starburst galaxy NGC 1569 are presented. After adopting several criteria to exclude other sources (foreground stars, background galaxies, etc.), 154 candidates of star clusters are identified in the near-infrared images of NGC 1569, which include very young star clusters. Especially, from analysis based on theoretical background, we found ten very young star clusters near the center of NGC 1569. The total reddening values toward these clusters are estimated to be $A_V$=1-9 mag from comparison with the theoretical estimates given by the Leitherer et al. (1999)'s star cluster model.

Analyzing Refractory Bricks of Ladles using Infrared Images (열화상 영상을 이용한 래들의 내화물 열화도 분석)

  • Lee, Sang Jun;Jeon, Yong-Ju;Kim, Sang Woo
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.21 no.4
    • /
    • pp.291-300
    • /
    • 2015
  • In the steel manufacturing process heat-endurance deterioration of a ladle used to cause a big accident. In this paper, an infrared imaging system and image analyzing procedure are proposed for inspecting refractory bricks of a ladle. The proposed algorithm contains following three parts: two-stage image selection procedure, reference point detection, and analysis of heat-endurance deterioration. Experiments were conducted with real data from a steel plant and detailed configuration of infrared imaging system was presented.

An Image Enhancement Algorithm for Panoramic Infrared Images (파노라믹 적외선 영상에서의 영상 향상 기법)

  • 김영춘;이종원;김병주;권기구;김기홍;신용달;안상호
    • Journal of Korea Multimedia Society
    • /
    • v.6 no.6
    • /
    • pp.977-984
    • /
    • 2003
  • In this paper, we propose an image enhancement algorithm for panoramic infrared image. This method divides a panoramic infrared image into disjoint subimages and performs the contrast stretch for subimages using statistical characteristics of each subimage. But these cause blocking artifact in boundary regions of neighboring subimages which different to the statistical characteristic. To remove blocking artifact, we perform the contrast stretch for subimage's boundary regions using statistical characteristics of horizontally neighboring subimages. Experimental results show that the proposed method effectively improves their appearance to human viewers.

  • PDF

NEAR-INFRARED PHOTOMETRY OF THE STAR CLUSTERS IN THE DWARF IRREGULAR GALAXY IC 5152

  • Kyeong, Jae-Mann;Sung, Eon-Chang;Kim, Sang-Chul;Sohn, Sang-Mo Tony;Sung, Hyun-Il
    • Journal of The Korean Astronomical Society
    • /
    • v.39 no.4
    • /
    • pp.89-94
    • /
    • 2006
  • We present JHK-band near-infrared photometry of the star clusters in the dwarf irregular galaxy IC 5152. After excluding possible foreground stars, a number of candidate star clusters are identified in the near-infrared images of IC 5152, which include young populations. Especially, five young star clusters are identified in the(J-H, H-K) two color diagram and the total extinction values toward these clusters are estimated to be $A_v=2-6$ from the comparison with the theoretical values given by the Leitherer et al.(1999)'s theoretical star cluster model.

Performance Improvement Technique of Long-range Target Information Acquisition for Airborne IR Camera

  • Yang, Hyun-Jin
    • Journal of the Korea Society of Computer and Information
    • /
    • v.22 no.7
    • /
    • pp.39-45
    • /
    • 2017
  • In this paper, we propose three compensation methods to solve problems in high-resolution airborne infrared camera and to improve long-range target information acquisition performance. First, image motion and temporal noise reduction technique which is caused by atmospheric turbulence. Second, thermal blurring image correction technique by imperfect performance of NUC(Non Uniformity Correction) or raising the internal temperature of the camera. Finally, DRC(Dynamic Range Compression) and flicker removing technique of 14bits HDR(High Dynamic Range) infrared image. Through this study, we designed techniques to improve the acquisition performance of long-range target information of high-resolution airborne infrared camera, and compared and analyzed the performance improvement result with implemented images.

Extraction of Sea Surface Temperature in Coastal Area Using Ground-Based Thermal Infrared Sensor On-Boarded to Aircraft (지상용 열적외선 센서의 항공기 탑재를 통한 연안 해수표층온도 추출)

  • Kang, Ki-Mook;Kim, Duk-Jin;Kim, Seung Hee;Cho, Yang-Ki;Lee, Sang-Ho
    • Korean Journal of Remote Sensing
    • /
    • v.30 no.6
    • /
    • pp.797-807
    • /
    • 2014
  • The Sea Surface Temperature (SST) is one of the most important oceanic environmental factors in determining the change of marine environments and ecological activities. Satellite thermal infrared images can be effective for understanding the global trend of sea surface temperature due to large scale. However, their low spatial resolution caused some limitations in some areas where complicated and refined coastal shapes due to many islands are present as in the Korean Peninsula. The coastal ocean is also very important because human activities interact with the environmental change of coastal area and most aqua farming is distributed in the coastal ocean. Thus, low-cost airborne thermal infrared remote sensing with high resolution capability is considered for verifying its possibility to extract SST and to monitor the changes of coastal environment. In this study, an airborne thermal infrared system was implemented using a low-cost and ground-based thermal infrared camera (FLIR), and more than 8 airborne acquisitions were carried out in the western coast of the Korean Peninsula during the periods between May 23, 2012 and December 7, 2013. The acquired thermal infrared images were radiometrically calibrated using an atmospheric radiative transfer model with a support from a temperature-humidity sensor, and geometrically calibrated using GPS and IMU sensors. In particular, the airborne sea surface temperature acquired in June 25, 2013 was compared and verified with satellite SST as well as ship-borne thermal infrared and in-situ SST data. As a result, the airborne thermal infrared sensor extracted SST with an accuracy of $1^{\circ}C$.

Topography in intertidal zone by satellite images

  • Kang, Yong-Q.
    • Proceedings of the KSRS Conference
    • /
    • 2002.10a
    • /
    • pp.664-669
    • /
    • 2002
  • Intertidal zone (tidal flat) is a place which is sometimes dry and sometimes wet depending on the tidal rhythm. Direct measurement of topography in the intertidal zone is very difficult to be achieved. The interface between wet and dry parts in the tidal flat, which can be identified from near infrared band of satellite image, is a 'depth contour' which corresponds to the sea level at the time of satellite pass. Aquisition of topography data in tidal flat is possible by combining various techniques such as (1) identification of the interface between wet and dry parts, (2) GCP correction of satellite image, and (3) realtime prediction of sea level elevation at the time of satellite pass. The algorithm was successfully applied in obtaining topography (bathymetry) data in the intertidal zone of Asan Bay in the west coast of Korea from 26 satellite images. The method is expected to be very efficient in making bathymetry data base in the western and southern parts of Korea where tidal flats are well developed in wide regions.

  • PDF

Infrared Sensitive Camera Based Finger-Friendly Interactive Display System

  • Ghimire, Deepak;Kim, Joon-Cheol;Lee, Kwang-Jae;Lee, Joon-Whoan
    • International Journal of Contents
    • /
    • v.6 no.4
    • /
    • pp.49-56
    • /
    • 2010
  • In this paper we present a system that enables the user to interact with large display system even without touching the screen. With two infrared sensitive cameras mounted on the bottom left and bottom right of the display system pointing upwards, the user fingertip position on the selected region of interest of each camera view is found using vertical intensity profile of the background subtracted image. The position of the finger in two images of left and right camera is mapped to the display screen coordinate by using pre-determined matrices, which are calculated by interpolating samples of user finger position on the images taken by pointing finger over some known coordinate position of the display system. The screen is then manipulated according to the calculated position and depth of the fingertip with respect to the display system. Experimental results demonstrate an efficient, robust and stable human computer interaction.

ONE TYPE OF EDDY DEVELOPMENT IN THE NORTHEASTERN KUROSHIO BRANCH

  • Bulatov, Nafanail V.;Kapshiter, Alexander V.;Obukhova, Natalya G.
    • Proceedings of the KSRS Conference
    • /
    • v.2
    • /
    • pp.926-929
    • /
    • 2006
  • Some features of vertical structure of the frontal interaction zone of the warm Kuroshio Current and cold Oyashio Current are known from 1930 from analysis of ship data. Ship data however do not allow carrying out the area detailed survey opposite to satellite infrared (IR) observations which possess by high spatial and temporal resolution. Analysis of NOAA AVHRR IR images demonstrated that process of formation and development of the Kuroshio warm core rings is highly complex. They are formed as a result of development of anticyclonic meanders of the warm Kuroshio waters and spin off them from the current. Joint analysis of thermal infrared images and altimetry data has also indicated that interaction of eddies to the frontal zone plays a crucial role in formation of large eddies moving to the Southern Kuril region.

  • PDF

Perceptual Fusion of Infrared and Visible Image through Variational Multiscale with Guide Filtering

  • Feng, Xin;Hu, Kaiqun
    • Journal of Information Processing Systems
    • /
    • v.15 no.6
    • /
    • pp.1296-1305
    • /
    • 2019
  • To solve the problem of poor noise suppression capability and frequent loss of edge contour and detailed information in current fusion methods, an infrared and visible light image fusion method based on variational multiscale decomposition is proposed. Firstly, the fused images are separately processed through variational multiscale decomposition to obtain texture components and structural components. The method of guided filter is used to carry out the fusion of the texture components of the fused image. In the structural component fusion, a method is proposed to measure the fused weights with phase consistency, sharpness, and brightness comprehensive information. Finally, the texture components of the two images are fused. The structure components are added to obtain the final fused image. The experimental results show that the proposed method displays very good noise robustness, and it also helps realize better fusion quality.