• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.12
• /
• pp.1054-1061
• /
• 2016

Development of an accurate infrared signature (IR) measurement system is expected to contribute in the development of low observable technology and the spectroscopic analysis of electromagnetic radiation. Application of a spectroradiometer (SR) allows for the measurement of detailed infrared signature from the exhaust plume due to its own heat source. Establishment of a measurement system using a micro-turbo engine is intended to simulate the modelling of the aircraft plume. The engine was installed on a test stand to measure the engine performance. The IR signature was measured by placing the SR perpendicular to the axis line of the exhaust plume. Reference data from the blackbody were also measured to calibrate the raw data, and the infrared signature of the background was also measured for comparison with that of the plume. The calibrated spectral radiance was obtained through the data reduction process and the results were analyzed in specific bands. The experiments revealed that the measurement system established here showed sufficient performance for further comprehensive analysis.

• Journal of Technologic Dentistry
• /
• v.36 no.3
• /
• pp.149-158
• /
• 2014

Purpose: Dental casting Co-Cr-Mo based alloys of five kinds of ingot type and two kinds of shot type were analyzed the melting processes with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer. Methods: When Co-Cr-Mo based alloys were put about 30g/charge in the ceramic crucible of high frequency induction centrifugal casting machine and heat, Infrared thermal image analyzer and IR thermometer indicated these alloys in the crucible were set and operated. Results: The melting temperatures of alloys measuring infrared thermal image analyzer were deviated ${\pm}10^{\circ}C$ compared to those of manufacturing company. On the other hand, the melting time of alloys were differently appeared with the shape of alloys(ingot and shot type). Conclusion: The melting temperatures of dental Co-Cr-Mo based alloys were measured the degree of $1,360{\sim}1410^{\circ}C$ and the heating time with the alloys of ingot and shot type were deviated ${\pm}10sec$.

• The Research Journal of the Costume Culture
• /
• v.30 no.1
• /
• pp.88-101
• /
• 2022

Molybdenum is used in electrical contacts, industrial motors, and transportation materials due to its remarkable ability to resist heat and corrosion. It is also used to flame coat other metals. This study investigated, the thermal characteristics of the molybdenum sputtered material, such as electrical conductivity, and stealth effects on infrared thermal imaging cameras. To this end, molybdenum sputtered samples were prepared by varying the density of the base sample and the type of base materials used. Thereafter, the produced samples were evaluated for their surface state, electrical conductivity, electromagnetic field characteristics, thermal characteristics, stealth effect on infrared thermal imaging cameras, and moisture characteristics. As a result of infrared thermal imaging, the molybdenum layer was directed towards the outside air, and when the sample was a film, it demonstrated a greater stealth effect than the fabric. When the molybdenum layer was directed to the outside air, all of the molybdenum sputtering-treated samples exhibited a lower surface temperature than the "untreated sample." In addition, as a result of confirming electrical properties following the molybdenum sputtering treatment, it was determined that the film exhibited better electrical conductivity than the fabric. All samples that were subjected to molybdenum sputtering exhibited significantly reduced electromagnetic and IR transmission. As a result, the stealth effect on infrared thermal imaging cameras is considered to be a better way of interpreting heat transfer than infrared transmission. These results are expected to have future applications in high-performance smartwear, military uniforms, and medical wear.

• Polymer Science and Technology
• /
• v.21 no.2
• /
• pp.191-197
• /
• 2010

• Fire Protection Technology
• /
• s.13
• /
• pp.18-26
• /
• 1992

This report is explained about operating principles, characteristices of flame detectors. Flame detector is designed to detect the UV (Ultraviolet) and IR (Infrared) rediation produced by flaming involving carbonaceous materials.

• The Bulletin of The Korean Astronomical Society
• /
• v.34 no.2
• /
• pp.36.1-36.1
• /
• 2009

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.298-299
• /
• 2011

최근 입력소자로 활용되는 터치스크린은 키보드나 마우스와 같은 입력장치를 사용하지 않고, 스크린에 손가락, 펜 등을 접촉하여 입력하는 방식이다. 터치패널의 구현방식에 따라 저항막(Resistive) 방식, 정전용량(Capacitive) 방식, SAW (Surface Accoustic Wave; 초음파) 방식, IR (Infrared; 적외선) 방식등으로 구분된다. 특히 최근 관심을 받고 있는 IR 방식은 적외선이 사람의 눈에는 보이지 않으나, 직진성을 가지고 있어 장애물이 있으면 차단되는 특성을 이용한 방식이다. IR방식의 터치패널은 발광(Light emitting)소자와 수광(Light detecting)소자가 마주하도록 배치되어 터치에 의해 차단된 좌표를 인식하게 되며, ITO 필름 등이 필요 없어 Glass 1장으로도 구현이 가능하며 투과율이 우수하다. 이러한 IR 방식의 터치패널을 제작하기 위하여 사용된 IR 광검출기는 광학적 band-gap이 작은 박막물질을 필요로 한다. 본 연구에서는 IR 광검출을 위한 물질로 SiGe를 co-sputtering 기법을 이용하여 성장시켰다. 일반적으로 SiGe 박막을 성장시키기 위하여 저압화학기상증착법(low pressure chemical vapor deposition, LPCVD)이나 고진공 LPCVD를 사용하지만 본 연구에서는 CVD에 비하여 무독성이면서 환경친화적이고 초기투자비용이 낮은 증착장비인 sputtering을 이용하였다. 본 연구에서 성장된 SiGe 박막은 400$^{\circ}C$에서 rf plasma가 인가된 Ge과 dc plasma가 인가된 Si의 power를 조절하여 결정화도가 70% (Fig. 1)이고 결정성장방향이 (111)과 (220)방향으로 성장하는 SiGe 박막을 얻을 수 있었다. 본 논문에서는 co-sputtering 성장조건에 따라 성장된 SiGe의 박막 특성을 논의할 것이다.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.5
• /
• pp.372-376
• /
• 1987

Acetone solution of quinoline-8-carbaldehyde reacts with $[Rh(cod)(PPh_3)_2] PF_6$and $[Ir(cod)(PPh_3)_2] PF_6$ to yield $[Rh(NC_9H_6CO)(H)(PPh_3)_2(CH_3COCH_3)] PF_6$ (1) and $[Ir(NC_9H_6CO)(H)(PPh_3)_2(CH_3COCH_3)] PF_6$ (2), respectively. The compound $[Ir(cod)(PPh_3)_2] PF_6$ also reacts with $Ph_2PC_6H_4-o-CHO$ in the acetone / $H_2O$ mixture to give $[Ir(Ph_2PC_6H_4-o-CO)(H)(PPh_3)_2(CH_3COCH_3)] PF_6$ (3). Compounds 1, 2, and 3 were characterized by infrared, $^1H$ NMR, $^{31}P$ NMR spectra and conductivity measurement. The $^1H$ NMR spectra of 1, 2, and 3 support the presence of a terminal hydride that is cis to the phosphine. The IR band of 3 at 2185 $cm^{-1}$, which is assigned to $\nu$(Ir-H), and the hydride cleavage reaction of 3 with $CCl_4$, provide evidence for the Ir-H bond.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.5
• /
• pp.338-341
• /
• 1986

Hydrocarbon solution of $Ir(PPh_3)_2(CO)OClO_3$ reacts with $Ph_2PC_6H_4$-o-CHO and 3-methyl-2-aminopyridinyl aldimine to yield ${\bar{Ir(Ph_2PC_6H_4-o-CO)}}\;(PPh_3)_2(CO)(H)ClO_4$(1) and ${\bar{Ir(NC_6H_6NC}}C_6H_5)(PPh_3)_2(CO)(H)ClO_4$(2), respectively. The compound $Ir(PPh_3)_2N_2Cl$ also reacts with $Ph_2PC_6H_4$-o-CHO and 3-methyl-2-aminopyridinyl aldimine to give ${\bar{Ir(Ph_2PC_6H_4-o-C}}O)(PPh_3)_2(H)Cl(3)$ and $Ir(NC_6H_5NCC_6H_5(PPh_3)_2(H)Cl(4)$, respectively. Compounds 1, 2, 3, and 4 were characterized by infrared, $^1H$ NMR, $^{31}p$ NMR, UV spectra, and conductivity measurements.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.72-80
• /
• 2016

There are various methods of developing latent fingerprints from evidence found at crime scenes. Crime scene investigators should choose appropriate techniques among them depending on the conditions of the evidences. In this study, we compared the three methods using forensic light sources to develop latent fingerprints on multi-colored surfaces. We selected the various samples according to color, shape and texture of the surfaces and developed the latent fingerprints using fluorescent powder, IR(Infrared) photography and Episcopic Co-axial Illumination. Fluorescent powder was highly effective on all surfaces. IR photography was also effective, but only on the not dark surfaces. Episcopic Co-axial Illumination was effective only on the flat and polished surfaces. Although fluorescent powder was fine regardless of the characteristics of the surfaces, IR photography was better on certain surfaces.