• 제목/요약/키워드: Information variable

검색결과 5,173건 처리시간 0.035초

가변 길이 정보 메시지 최적화 방법 (An optimization method for variable length information messages)

  • 김진규;강성원;정필수;김정민;백하은;권구형;김상수
    • 소프트웨어공학소사이어티 논문지
    • /
    • 제26권1호
    • /
    • pp.1-16
    • /
    • 2013
  • 가변 길이 정보 메시지는 컴퓨터 네트워크 시스템을 통하여 효율적인 정보 제공을 하기 위하여 개발된 통신 프로토콜 표준이다. 이러한 가변 길이 정보 메시지는 정보 수신자의 정보 요구 수준 및 정보 수신자의 정보 접근 수준에 따라 정보의 상세함을 가변적으로 조절 할 수 있도록 설계된 메시지이다. 정보 메시지 최적화 기술은 정보 메시지를 다양한 데이터 압축 기술을 사용하여, 메시지 전체의 물리적인 사이즈를 줄이려고 노력하였다. 정보 메시지 최적화에서는 정보의 정확성을 최우선으로 고려하고 있어, 최적화 전/후가 동일한 비손실 압축 기법을 응용하여 사용하고 있다. 하지만, 이러한 비손실 압축 기법만을 사용하면, 압축효율성이 현저하게 떨어져, 제한된 대역폭을 갖는 무선 네트워크 환경에서의 효율적인 전송이 이루어지지 않는다. 본 논문에서는 가변 길이 정보 메시지를 대상으로, 메시지 필드 단위로 정보의 최적화를 수행하여 메시지의 길이를 물리적으로 좀 더 효과적으로 최적화하도록 시도하였다. 또한, 본 논문에서 제시한 최적화 방법의 효율성을 보이기 위하여, 가변 길이 정보 메시지에 대한 최적화 실험을 수행하였다.

  • PDF

Source controlled variable bit-rate scheme을 이용한 파형 보간 부호화기의 음질 개선 기법 (Enhanced source controlled variable bit-rate scheme in a waveform interpolation coder)

  • 조근석;양희식;정상배;한민수
    • 대한음성학회:학술대회논문집
    • /
    • 대한음성학회 2007년도 한국음성과학회 공동학술대회 발표논문집
    • /
    • pp.315-318
    • /
    • 2007
  • This paper proposes the methods to enhance the speech quality of source controlled variable bit-rate coder based on the waveform interpolation. The methods are to estimate and generate the parameters that are not transmitted from encoder to decoder by the repetition and extrapolation schemes. For the performance evaluation, the PESQ(Perceptual Evaluation of Speech Quality) scores are measured. The experimental results shows that our proposed method outperforms the conventional source controlled variable bit-rate coder. Especially, the performance of the extrapolation method is better than that of the repetition method.

  • PDF

전류정보를 이용한 가변속냉동시스템의 열교환기 실시간 고장 진단 (On-line Fault Detection and Diagnosis for Heat Exchanger of Variable Speed Refrigeration System Based on Current Information)

  • 이동규;정석권
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2007년도 동계학술발표대회 논문집
    • /
    • pp.88-94
    • /
    • 2007
  • This study deals with on-line fault detection and diagnosis for heat exchanger of variable speed refrigeration system. Conventional studies about fault of heat exchanger in refrigeration system have used temperature and pressure information. The temperature and pressure are able to be used valuably for faults detection of constant speed refrigeration system. However in case of variable speed refrigeration system, the temperature and pressure are no longer useful information for fault detection due to compensation effect of feedback controller. While current information is possible to detect faults of variable speed refrigeration system. The current information was detected in an inverter, it was used after transforming rms value. The faults of variable speed refrigeration system are divided into electrical faults and mechanical faults. We performed fault detection and diagnosis about heat exchanger among mechanical faults such as condenser fouling and evaporator fan fouling through some experiments.

  • PDF

대용변수를 이용한 가변형 부분군 크기 ${\bar{X}}$ 관리도의 경제적 설계 (Economic Design of Variable Sample Size ${\bar{X}}$ Control Chart Using a Surrogate Variable)

  • 이태훈;이민구;권혁무;홍성훈;이주호
    • 품질경영학회지
    • /
    • 제45권4호
    • /
    • pp.943-956
    • /
    • 2017
  • Purpose: This paper proposes a VSS(Variable Sample Size) ${\bar{X}}$ control chart using surrogate variable and shows its effectiveness compared with FSS(Fixed Sample Size) ${\bar{X}}$ control chart using either performance variable or surrogate variable. Methods: The expected cost function of VSS ${\bar{X}}$ control chart is derived. The optimal designs are then found for numerical examples using a GA(genetic algorithm) and compared to those of the FSS ${\bar{X}}$ control charts. Results: Computational results show that VSS ${\bar{X}}$ control chart using surrogate variables is superior to FSS ${\bar{X}}$ control chart using either performance variable or surrogate variable from the economic view points. Conclusion: The proposed VSS ${\bar{X}}$ control chart will be useful in industry fields where a performance variable is not avaliable or too costly.

대용변수를 이용한 가변형 부분군 채취 간격 X 관리도의 경제적 설계 (Economic Design of Variable Sampling Interval X Control Chart Using a Surrogate Variable)

  • 이태훈;이주호;이민구
    • 대한산업공학회지
    • /
    • 제39권5호
    • /
    • pp.422-428
    • /
    • 2013
  • In many cases, an $\bar{X}$ control chart which is based on the performance variable is used in industrial fields. However, if the performance variable is too costly or impossible to measure and a less expensive surrogate variable is available, the process may be more efficiently controlled using surrogate variables. In this paper, we propose a model for the economic design of a VSI (Variable Sampling Interval) $\bar{X}$ control chart using a surrogate variable that is linearly correlated with the performance variable. The total average profit model is constructed, which involves the profit per cycle time, the cost of sampling and testing, the cost of detecting and eliminating an assignable cause, and the cost associated with production during out-of-control state. The VSI $\bar{X}$ control charts using surrogate variables are expected to be superior to the Shewhart FSI (Fixed Sampling Interval) $\bar{X}$ control charts using surrogate variables with respect to the expected profit per unit cycle time from economic viewpoint.

마이크로컨트롤러를 위한 variable width system bus 제어기 구현 (Design and Implementation of variable width system bus controller for microcontroller)

  • 김도집;이문기
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
    • /
    • pp.317-320
    • /
    • 2001
  • In this paper, Variable width system bus provides a variable data bus width from 8bit to 128bit. This paper has designed variable width system bus controller for microcontroller to connect to peripherals.

  • PDF

Weighted Least-Squares Design and Parallel Implementation of Variable FIR Filters

  • Deng, Tian-Bo
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -1
    • /
    • pp.686-689
    • /
    • 2002
  • This paper proposes a weighted least-squares(WLS) method for designing variable one-dimensional (1-D) FIR digital filters with simultaneously variable magnitude and variable non-integer phase-delay responses. First, the coefficients of a variable FIR filter are represented as the two-dimensional (2-D) polynomials of a pair of spectral parameters: one is for tuning the magnitude response, and the other is for varying its non-integer phase-delay response. Then the optimal coefficients of the 2-D polynomials are found by minimizing the total weighted squared error of the variable frequency response. Finally, we show that the resulting variable FIR filter can be implemented in a parallel form, which is suitable for high-speed signal processing.

  • PDF

자산전용성과 협업환경하에서의 정보공유가 공급사슬에 미치는 영향 : 통합적 SCM 성과형성 모델 (The Effect of Asset Specificity, Information Sharing, and a Collaborative Environment on Supply Chain Management (SCM): An Integrated SCM Performance Formation Model)

  • 김태룡;송장근
    • 유통과학연구
    • /
    • 제11권4호
    • /
    • pp.51-60
    • /
    • 2013
  • Purpose - The objective of this paper is to investigate the effect of asset specificity, the level of information sharing, the importance of information sharing, and an integrated collaborative environment on supply chain performance. Research design, data, and methodology - Data collection was implemented as follows: questionnaires were distributed to 250 companies that have business ties with Halla Climate Control Corporation. The empirical study to test our hypothesis was based on statistical analysis (using SPSS 18.0 and AMOS 18.0). The hypothesis of this paper is that the asset specificity variable has positive effects on the following variables: Level of information sharing, the importance of information sharing, and integrated collaborative environment. Moreover the variables, the level of information sharing, and the importance of information sharing are strongly influenced by the variable integrated collaborative environment, and these when combined, have an effect on the dependent variable, supply chain performance. We tested our hypothesized model utilizing path analysis with latent variables. Results - According to the results of our analysis, hypothesis H1, which tests whether there is a relationship between asset specificity and the integrated collaborative environment, is supported at the 0.01 level. Hypotheses H2 and H3 were also confirmed, and asset specificity had positive effects (+) on the level of information sharing variable. The importance of the information sharing variable was statistically significant at the 0.01 level. Hypotheses H4 and H5 posited that the integrated collaborative environment variable would have a positive effect on the level of information sharing; the importance of information sharing variable was strongly supported statistically, with a significant p-value below. Moreover, the level of information sharing (H6), and the importance of information sharing (H7) variables also had a statistically relevant influence on supply chain performance. As a result, existence of a collaborative system between companies would influence supply chain performance by strengthening real-time information access and information sharing. Thus, it is important to construct a collaborative environment where information sharing among companies and cooperation is possible. Conclusions - First, with rapid changes in the business environment, it becomes necessary for enterprises to acquire the right information in order to properly implement SCM. For successful SCM, firms should understand the importance of collaboration with supply chain partners and an internally built collaboration system, which in turn will better promote a partnership commitment with suppliers as well as collaborative integration with buyers. A collaborative system, as we suggest in this paper, facilitates the maintenance of a long-term relationship of trust, and can help reinforce information sharing. Second, it is necessary to increase information sharing over time via a collaborative system so that employees of the suppliers become aware of the system. The more proactive and positive attitudes are towards such a collaborative system by the managerial group, the higher the level of information sharing will be among the users. Successful SCM performance is achieved by information sharing through a collaborative environment rather than by investing only in setting up an information system.

  • PDF

A New Variable Selection Method Based on Mutual Information Maximization by Replacing Collinear Variables for Nonlinear Quantitative Structure-Property Relationship Models

  • Ghasemi, Jahan B.;Zolfonoun, Ehsan
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권5호
    • /
    • pp.1527-1535
    • /
    • 2012
  • Selection of the most informative molecular descriptors from the original data set is a key step for development of quantitative structure activity/property relationship models. Recently, mutual information (MI) has gained increasing attention in feature selection problems. This paper presents an effective mutual information-based feature selection approach, named mutual information maximization by replacing collinear variables (MIMRCV), for nonlinear quantitative structure-property relationship models. The proposed variable selection method was applied to three different QSPR datasets, soil degradation half-life of 47 organophosphorus pesticides, GC-MS retention times of 85 volatile organic compounds, and water-to-micellar cetyltrimethylammonium bromide partition coefficients of 62 organic compounds.The obtained results revealed that using MIMRCV as feature selection method improves the predictive quality of the developed models compared to conventional MI based variable selection algorithms.

A Fuzzy Variable Step Size LMS Algorithm for Adaptive Antennas in CDMA Systems

  • Su, Pham-Van;Tuan, Le-Minh;Kim, Jewoo;Giwan Yoon
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2002년도 춘계종합학술대회
    • /
    • pp.518-522
    • /
    • 2002
  • This paper proposes a new application of Fuzzy logic to Variable Step Size Least Mean Square (VS-LMS) adaptive beamforming algorithm in CDMA systems. The proposed algorithm adjusts the step size of the Least Mean Square (LMS) by using the application of Fuzzy logic in which the increase or decrease of step size depends on the fuzzy inference results of the Mean Square Error (MSE). Computer simulation results show that the proposed algorithm has a better capacity of tracking compared with the conventional LMS algorithms and other variable step size LMS algorithms.

  • PDF